PD18/19 Series
Complete Motorized Storefront Exit Device for Adams Rite 88/86 Retrofit
-The Command Access PD18 series is available a solenoid latch pullback Grade 1 architectural exit device; made for use in all institutions and commercial buildings storefront applications. Install this device with the confidence of knowing that the PD18 series meets or exceeds the high standards of other grade 1 products and carries our 3-year "no hassle " warranty, meaning we will support you. In retrofit situations for the Adams Rite 88 or 8600 series you can utalize the exsisiting hardware (i.e vertical rods) with no additional prep required. The PD18-RIM is also available in 12V version
The Command Access PD18-M series is a motorized latch pullback Grade 1 architectural exit device; made for use in all institutions and commercial buildings storefront applications. All PD18-M models are equipped with our PTS "push to set" technology. We know that door conditions change and in retrofit scenarios you never know exactly what you're walking into. But with our PTS adjustment your post installation adjustment is greatly simplified in 5 quick seconds. As a retrofit for the Adams Rite 88 or 86 models are designed to utilize the existing mounting locations and mortise or rod & case assemblies without having to remove the door Install this device with the confidence of knowing that the PD18-M series meets or exceeds the high standards of other grade 1 products and carries our 3-year "no hassle " warranty, meaning we will support you
Features
PD18
- High-Performance quality solenoids designed for demanding applications
- CVR includes the patented PM300 interface power modules programmed to maximize the effeciency and life of the solenoid.
- Extended duration latch pullback capability for “continuously on” conditions
- The “local boost” design allows for centralized power supplies and extended wire runs up to 500’ with 18/2 wire
- RIM device available in 12V version.
- 6’ cable with Quick Connect for PM300 module to easily connect to power supply lead
- Non-handed
- 3-year “no hassle” warranty - Longer than the traditional 1 year warranty because our stuff works!
- The slim, compact attractive low profile design enables mounting on narrow-style doors.
PD18-M
- Our motorized latch retraction is fast, quiet, and smooth!
- MM4 Smart Module: On board diagnostics with audible feedback for adjustment and power issues
- “PTS”: 5 second electronic adjustment for easy post installation adjustment
- Up to 300’ with 2-18ga --Long wire runs with provides installer with convenience of placing the locking
device power supply in a centralized location; i.e. the same closet as the access panel - 8’ cable with Quick Connect for MM4 module to easily connect to power supply lead
Specifications
CVR
- Voltage range – 24VDC +/- 10%
- Current Peak – 6A for 200 ms
- Current Hold -250mA
- 500’ with 18ga wire • 700’ with 16ga wire
RIM
- Voltage range – 12VAC/DC+/- 10%; 24VAC/DC +/- 10%
- Current - 900mA @12V, 450 mA @ 24V
- 500’ with 18ga wire • 700’ with 16ga wire
HARDWARE
Handing
- Device is non-handed
Push Bar Lenght
- Standard sizes: dimensioned for 36” and 48” openings. Standard width bars can be field cut to the next smallest opening width.
Door Thickness
- Suits 1-3/4” standard
Projection
- 2-5/8” when fully projected, 1-5/8”when dogged.
Stile Width
- Minimum 2” Stile. Fits narrow, medium, and wide stile aluminum doors.
Dogging
- Standard dogging with hex key or cylinder dogging option. Electric dogging also available.
Fasteners
- Standard self-tapping screws
Vertical Rods
- Top and bottom steel rods for easy adjustment
- Standard device is adjustable for nominal door heights
Installation Instructions PD18-M-RIM
Installation Instructions PD18-RIM
Installation Instructions PD18-M-CVR
Installation Instructions PD18-CVR
