Sensors, Switches, Relays and Timers

Overview Schlage 650 Series keyswitches utilize an innovative magnetic spring design which allows installers to configure both clockwise and counterclockwise key turn direction as well as momentary or maintained action in seconds. Single gang and narrow...

SECURITRON MK STANDARD MORTISE CYLINDER KEYSWITCH The MK Mortise Keyswitch supports electric lock control, alarm panel arming, reset and override when paired with any mortise cylinder 1-1/8" to 1-1/2".   FEATURES AND BENEFITS Product Features ...

Baldwin 6503009 2-1/8" Pre-Drilled Standard Door Adapter Accommodates 1-3/8 and 1-3/4 in. door thickness Baldwin recommends using the 6503.009 adaptor on knobs and lighter levers Works with both knob and lever strength latches Retrofits all 2.125"...

SCHREXKIT-ML Field Installable Request to Exit switch for Schlage L9000 series mortise locks. The kit’s easy “drop-in” installation adds a signal to alert the control panel that the door is about to be opened by someone exiting from...

DynaLock 6200 Series Palm Switch PushButtons Model 6290 Palm Switch, 1-5/8” Dia. 30 Sec. Min. PTD, SPDT Form “Z”, NFPA-101 6000 Series controls provide a popular selection of request to exit (REX) conntrols in multiple switching...

DynaLock 7000 Series Keyswitches Model 7001 Maintained, (1) SPDT Keyswitches may be used to control electric locks, shunt or activate security panels, consoles or any similar requirements. The assembly is supplied with face plate, bracketry, cylinder...

LCN 8310-805C Door Position Switch (DPS) Concealed Used when 8310-804-1 or 8310-804-2 Door Mounted Safety Sensor and 8310-845 Relay Module is installed in conjunction w/ either a electrohydraulic, pneumatic or Benchmark Automatic Operator ...

Exit motion sensor with ceiling and surface mount adapters. This versatile sensor can be surface mounted above any door, ceiling or wall for request to exit applications. The EMS Series, Passive Infrared (PIR) Sensor, has the flexibility and low profile...

NORTON RIXSON Norton Rixson 506/533 - 6" Round Push SwitchOVERVIEW Push to open, 6" round surface, 9 volt battery, 15 amp @ 125 VAC, flush mounted, stainless steel with blue letters, hardwired or radio frequency (RF) option Buy the Norton Rixson 506 Push...

NORTON RIXSON 507/532 PUSH SWITCH OVERVIEW 532/507 Push Switch. Push to open, 6"" W x 6"" H, 9 volt battery, 15 amp @ 125 VAC, flush mounted, stainless steel with blue letters, hardwired or radio frequency (RF) option. Buy the Norton Rixson 532 Push...

NORTON RIXSON 638 LOW PROFILE PUSH PLATE OVERVIEW 638 Low Profile Push Plate. Low profile push plate, 36"" W x 6"" H, radio frequency (RF), 433MHz Buy the Norton Rixson 638 Low Profile Push Plate for easy installation and dependable door hardware...

NORTON RIXSON 663 MOTION SENSOR OVERVIEW 663 Motion Sensor. Unidirectional motion sensor with adjustable angle pattern Buy the Norton Rixson 663 Motion Sensor for easy installation and dependable door hardware solution. NORTON RIXSON 663 MOTION SENSOR...

Dormakaba RCI 941 Mullion Push Plate The 941 mullion push plate has a narrow profile design for easy application on guide rails and swing doors. The beveled edges of the RCI 941 push plate are tamper resistant, creating a dependable solution in...

Dormakaba RCI 946T/950T Short-Range Touchless Actuator The 946T & 950T are short range touchless actuators that utilize capacitive technology for the activation of automatic doors. The adjustable short-range detection zone reduces unwanted...

Dormakaba RCI 991 Pneumatic Time Delay The 991 pneumatic time delay push button is available in handicap and exit switch configurations. The handicap button is blue with an engraved handicap symbol and is capable of a 1-45 second time delay. The exit...

620/631 Series Heavy Duty Pushbuttons Schlage 620/631 Series heavy-duty pushbuttons are commonly used to control ingress and/or egress of a door. 620 and 631 Series come standard with a momentary switch but feature many factory orderable...

679-05HMConcealed SPDT magnetic switch Door position switches are used to detect the open or closed status of an opening and then send this status to a control panel. They come in a variety of shapes and sizes and are designed for monitoring door...

Schlage TAILPIECES B600-086 Tailpiece, For Use With B562P Everest/Primus Double Cylinder & Over 1-3/4" To 2-1/4" Doors  

ACSI 1310-2 Mortise Keyswitches Single gang, 2 LEDs (red & green), wall mountACSI Series 1310 Mortise Keyswitches are designed to control electric locks, electric strikes, electric exit devices and a variety of other control applications. The...

The IPW-POE8 is an 8-port gigabit PoE switch for use with IP based intercoms and devices. It supports both IEEE 802.3af and 802.3at PoE on all eight ports, with an overall budget of 64W. Management of the switch is handled by an internal web interface...

Alarm Controls - TS-3 Request to Exit Station The TS-3 request to exit stationwith push button and single LED, provides a convenient way to add authorized access control for a variety of applications. LED status indicator offers...

Camden CM-RQE70 Series Request-to-Exit Motion Sensors – Adjustable Infrared, 12–24V, White or Black Housing The Camden CM-RQE70 Series Request-to-Exit Sensors deliver reliable and precise motion detection for secure door release in access...

SUREWAVE CM-332 SERIES HAND ICON/'WAVE TO OPEN' TEXT FACEPLATE TOUCHLESS SWITCH CM-332 touchless switches provide ‘state of the art’ door activation and control while eliminating the spread of germs. These line powered touchless switches offer an...

CATREXKIT-CL Field Installable Rex switch for Command Access CL1 Series CylindricalLock. This switch is SPDT (single pull, double throw).    Specifications: Rating: .25A@ 24VAC/DC Configuration: Green - Common (C)       ...