Klein Tools 50131 Conduit Meas...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$208.57
$125.85
Klein Tools 50131 Conduit Measuring Pull Tape, 1800-Pound x 1300-Foot

Klein Tools 50131 Conduit Measuring Pull Tape, 1800-Pound x 1300-Foot

(No reviews yet) Write a Review

Model: 50131
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$208.57
$125.85
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Conduit Measuring Pull Tape, 1800-Pound x 1300-Foot

  • Warnings

    • Not for overhead lifting.
    • For wire and cable installation only.
    • Do not use on live circuits. Tape can wick moisture and become conductive.
    • Knots in line can significantly reduce tensile strength.

  • Features

    • Bucket provides easy storage and transport
    • Additional pull tape tensile strengths and lengths available
    • Pre-lubricated to reduce friction
    • Hole in bucket lid for controlled, tangle-free dispensing
    • Tangle-Free Dispensing with Hole in Bucket Lid
    • 1800-Pound (816 kg) tensile strength
    • Tape is marked with easy-to-read, descending 1-Foot increments to measure conduit runs and determine the amount of tape left to pay out
    • Pull Tape is a woven, flat polyester strapping that disperses pull load and minimizes stretching when pulling


50131 - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Container:
Orange Bucket with Lid and Handle
Item Depth:
11.0000 in
Item Height:
11.0000 in
Item Weight:
16.2000 lbs
Item Width:
11.0000 in
Overall Length:
1300' (396 m)
Overall Width:
0.6" (1.5 cm)
Tensile Strength:
1800 lb (816 kg)
Department:
Electrical
Product Group:
Electrical Installation Tools
Product Subgroup:
Cable Pullers
Product Type:
Pre-Lubricated, Flat Pull Tape with 1' Markings
Product Details:
Pre-Lubricated, Flat Pull Tape with 1' Markings
Product Color:
White Tape with Black Markings
Product Weight:
16.2 lb (7.3 kg)
Product Height:
11 in
Product Depth:
11 in
Product Width:
11 in

Klein Tools 50131 – Frequently Asked Questions

1) Can I use Klein Tools 50131 pull tape to measure a conduit run as I pull?
That's what the 1-foot markings are for. The 50131 tape is printed with descending 1-foot increments, so as you blow or push it through, the number at the entry point tells you the length of the run, and it also tells you how much tape is left in the bucket. Total length is 1300 feet (396 m).
2) Is it safe to use this pull tape near energized conductors?
No. Polyester pull tape can wick moisture and become conductive, so the 50131 must not be used on live circuits. De-energize and verify dead before pulling. It is also not rated for overhead lifting of any kind.
3) Will flat pull tape fit through small conduit better than rope?
The tape is 0.6 inch (1.5 cm) wide woven flat polyester, so it lies against the conduit wall instead of bunching like round rope. Flat strapping also spreads the pull load across the cable jacket and minimizes stretch during the pull. It comes pre-lubricated to cut friction through bends.
4) How does the 50131 pull tape dispense on the job, and how heavy is the bucket to carry up a ladder?
It ships in an orange bucket with a lid and handle, and the lid has a hole so the tape pays out through it without tangling or spilling in the can. Loaded weight is 16.2 lb (7.3 kg), and the bucket measures 11 x 11 x 11 inches, so one hand carries it and it stacks on a van shelf.
5) Is 1300 feet of pull tape enough for long underground runs, or should I order a different size?
One bucket of the 50131 covers runs up to 1300 feet (396 m) in a single pay-out, which handles most feeder and site duct runs without splicing. Klein offers the same flat measuring tape in other tensile strengths and lengths, so if your runs are shorter or you need a higher rating than 1800 lb, order the corresponding length or strength instead.
How fast can I get the Klein Tools 50131 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 50131 come with a warranty?
Absolutely. The Klein Tools 50131 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 50131?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 50131 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!