Tape Measure, 25-Foot Single-Hook
9125 - spec sheet
Warnings
- Not insulated. Do NOT use on live circuits. Avoid magnetic contact with sensitive electronic or computer equipment.
- To avoid personal injury and prevent damage to product, do not allow the blade to retract into case at full speed.
- Do NOT open case. Spring motor is under tension and opening may cause injury.
- Always wear eye protection.
Features
- US Patent D803711
- Integrated tether hole for use at height
- Retraction speed brake controls blade speed and protects fingers from touching blade
- The impact resistant housing is over-molded with a soft touch finish for excellent grip and stands up to jobsite demands
- Single hook attaches easily to studs, conduit, pipes, etc.
- Easy-to-read Bold Lines Every 1/8-Inch; Tough Blade; 16-Foot Reach; Attachment Channel to Tether Tape Measure
- Tape Measure with 16-Foot Reach (standout plus estimated extension of typical user) and a 13-Foot Standout
- Heavy-duty, tough, durable nylon-coating protects blade printing and delivers longer blade life
- Metal belt-clip securely holds tape measure to belts, pockets, or pouches
- Uncluttered, easy-to-read bold lines marked on blade every 1/8-Inch
9125 - spec sheet
Manufacturer Resources
Product Specs
- Belt Clip:
- Yes
- Case Color:
- Orange/Black
- Case Material:
- PC-ABS with TPR Overmolding
- Graduations:
- 1/16"
- Hook:
- Single
- Lockable Tape:
- Yes
- Magnetic:
- No
- Measurement Standard:
- Imperial (SAE)
- Overall Height:
- 3.43" (8.7 cm)
- Overall Length:
- 3.43" (8.7 cm)
- Overall Width:
- 2.35" (6 cm)
- Rewind Type:
- Automatic
- Standout Length:
- Up to 13' (4 m)
- Tape Coating:
- Nylon
- Tape Length:
- 25' (7.6 m)
- Tape Material:
- Steel
- Department:
- Electrical
- Product Group:
- Tool Sets
- Product Subgroup:
- Tool Kits
- Product Type:
- Closed Case, Double Sided Single Non-Magnetic Hook
- Product Details:
- Closed Case, Double Sided Single Non-Magnetic Hook
- Product Height:
- 2.3500 in
- Product Material:
- Plastic Case with Steel Blade
- Product Weight:
- 1.2900 lbs
- Product Width:
- 3.4300 in
- Product Depth:
- 3.4300 in
Klein Tools 9125 – Frequently Asked Questions
1) How far will the Klein 9125 tape measure stand out unsupported before it buckles?
Up to 13 feet of standout on the Klein Tools 9125, and Klein rates the working reach at 16 feet once you add the typical user's extension. That is what lets one person measure a ceiling height, a conduit run, or a stud bay across an open span without a helper holding the other end. Blade length overall is 25 feet.
2) Is the Klein Tools 9125 tape measure safe to use on live electrical work?
No. The 9125 is not insulated and must not be used on live circuits. The blade is steel, so treat it as a conductor and de-energize before measuring in a panel or near exposed conductors. Klein also warns against magnetic contact with sensitive electronic or computer equipment, and recommends eye protection whenever the blade is out.
3) Does the Klein 9125 tape measure have a magnetic hook?
No, the hook on the 9125 is non-magnetic. It is a single hook, double sided, that catches on studs, conduit, pipe and similar edges. If you need the tape to stick to steel studs, strut or a panel enclosure on its own, this is not the model for that.
4) How fine are the markings on the Klein 9125 blade, and is it metric or inches?
Imperial only, graduated to 1/16 inch, with bold lines printed every 1/8 inch so the blade reads fast at arm's length. There are no metric markings, so if your drawings are in millimeters you want a different tape.
5) Does the Klein 9125 tape lock, and does the blade snap back hard?
The tape locks, and rewind is automatic on a spring return. Klein builds in a retraction speed brake that slows the blade on the way in and keeps fingers off the edge. Even so, do not let the blade retract at full speed, and never open the case, the spring motor is under tension.
6) Will the blade on the Klein 9125 wear off the printing from daily jobsite use?
The steel blade is nylon coated, which Klein specifies to protect the printed markings and extend blade life. The case is PC-ABS with TPR overmolding for grip and impact resistance. For a crew tape that gets dragged through block dust and dropped off a ladder daily, those are the two wear points and both are addressed here.
7) What is the exact part number to order the Klein 25-foot single-hook tape measure?
Order Klein Tools 9125. It is the 25-foot single-hook closed case model, and the design carries US Patent D803711. If you are standardizing a crew or an MRO stockroom on one tape, that is the number to put on the PO.
How fast can I get the Klein Tools 9125 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 9125 come with a warranty?
Absolutely. The Klein Tools 9125 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 9125?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 9125 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.