You may also like
Klein Tools Tape Measure Magnetic Double-Hook Steel Blade Nylon
Model: KLN-9216-2
Klein Tools Tape Measure 16-Foot Magnetic Double-Hook Steel Blade Nylon Coating ProfessionalProfessional-Grade Measuring Tool for Electrical and Construction ApplicationsThe Klein Tools Tape Measure...
Klein Tools
Starting at
$47.52
Tape Measure- 25' Magnetic Double Hook
Features
- Nylon-coated hardened steel blade resists abrasion and wear for long life.
- First 11'' (279 mm) has oversized, bold numbers.
- Double-sided rule for measurement while using against wall, ceiling or conduit.
- Horizontal and vertical standout for easy one person measurements.
- Shock and impact resistant case.
- True zero feature for accurate inside and outside measuring.
- Rare earth magnetic double end hook
- Steel belt clip for convenience.
- Built-in shock absorber to protect blade tip.
- Easy-read fractional scale.
Manufacturer Resources
Product Specs
- Department:
- Electrical
- Product Group:
- Tool Sets
- Product Subgroup:
- Tool Kits
- Product Type:
- Tape Measure
Klein Tools 93225 – Frequently Asked Questions
1) What does the magnetic double hook on the Klein Tools 93225 tape measure actually do on the job?
The 93225 has a rare earth magnetic double end hook, so the tip grabs and holds on steel: strut, conduit, boxes, studs in a metal-framed wall, panel enclosures. That lets one person pull a run and read it without a second set of hands or a helper holding the end. It pairs with horizontal and vertical standout, so the blade also holds itself out unsupported for overhead and vertical measurements.
2) Does the Klein 93225 measure accurately for inside dimensions like between studs or inside a box?
Yes. The 93225 has a true zero feature, so the end hook compensates for its own thickness and reads correctly whether you hook it for an outside pull or butt it into a corner for an inside measurement. That matters for inside-to-inside dimensions such as a box opening or a stud bay, where a tape without true zero throws the reading off by the hook thickness.
3) Can I measure with a Klein 93225 while holding it against a ceiling or conduit run?
Yes. The blade on the 93225 is double-sided, printed on both faces, so when the tape is flipped against a wall, ceiling, or a conduit run you can still read the graduations facing you. That is the main reason electricians pick this one over a single-sided blade for overhead work.
4) Is the Klein 93225 blade coated, and will it hold up in a tool bag on a commercial site?
The blade is nylon-coated hardened steel, which is what resists the abrasion and wear that chews up bare blades. The case is shock and impact resistant, and there is a built-in shock absorber at the tip to take the hit when the blade snaps back. For MRO and contractor use that is the combination that decides how long a tape survives daily retraction and drops.
5) Will the magnet on this Klein tape hold on a wood-framed job, or should I pick a different tape?
The magnetic hook on the 93225 only bites on ferrous metal, so on all-wood framing you are relying on the standard hook and the tape's standout, same as any other tape. The magnet earns its keep on steel stud, strut, conduit, raceway, and enclosure work. If your work is almost entirely wood framing, a non-magnetic 25 foot tape does the same job; the double-sided blade and true zero are still reasons to take this one either way.
6) Is the Klein 93225 easy to read in a dark panel or crawlspace?
The first 11 inches (279 mm) carry oversized, bold numbers, which is the range you use most for device and box layout and the hardest to read in poor light. The rest of the blade uses an easy-read fractional scale rather than decimal, so it matches the fractions on drawings and rough-in dimensions.
7) Does the Klein 93225 tape measure come with a belt clip?
It does, and it is a steel clip rather than plastic, so it will not snap off the first time it catches on a ladder rail. No separate holster or pouch is needed to carry it.
How fast can I get the Klein Tools 93225 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 93225 come with a warranty?
Absolutely. The Klein Tools 93225 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 93225?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 93225 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.