Crouse-Hinds LL35CGN Type LL C...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$16.93
Crouse-Hinds LL35CGN Type LL Conduit Body, Copper-Free Aluminum, 1-Inch

Crouse-Hinds LL35CGN Type LL Conduit Body, Copper-Free Aluminum, 1-Inch

(No reviews yet) Write a Review

Model: LL35CGN

In Stock (leaves warehouse same day if ordered before 3pm ET)

$16.93
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Crouse-Hinds LL35CGN Type LL Conduit Body, Copper-Free Aluminum, 1-Inch

The Crouse-Hinds LL35CGN is a 1-Inch Type LL conduit body built from die cast copper-free aluminum, engineered to provide access to conduit runs for pulling, splicing, or terminating conductors while maintaining a rugged, corrosion-resistant enclosure. As a Type LL body, it offers a left-side outlet configuration that helps electricians route conduit around obstructions and make direction changes in a raceway system without adding unnecessary bends. The copper-free aluminum construction makes this conduit body a durable, lightweight alternative to cast iron or steel bodies, suitable for a wide range of commercial and industrial electrical installations where corrosion resistance and long-term reliability are required. Sized for standard 1-Inch conduit, the LL35CGN gives installers a dependable access point along rigid or intermediate metal conduit (IMC) runs, simplifying pulls and terminations on the job site.

Key Features

  • Trade Size: 1-Inch conduit body sized for standard 1-Inch conduit runs, providing convenient access points along the raceway.
  • Durable Construction: Die cast copper-free aluminum housing delivers a corrosion-resistant, lightweight alternative to iron or steel bodies for long service life in demanding environments.
  • Type LL Configuration: Left-side outlet body design allows conductors to be pulled, spliced, or redirected at a change of direction in the conduit run without requiring additional fittings.
  • Copper-Free Alloy: The copper-free aluminum formulation reduces the risk of galvanic corrosion when installed near dissimilar metals, making it a dependable choice for a variety of job-site conditions.
  • Lightweight Handling: Aluminum construction reduces overall fitting weight compared to cast iron equivalents, easing installation in overhead or long conduit runs.

Technical Specifications

  • Product Type: Conduit Body
  • Body Style: Type LL
  • Trade Size: 1-Inch
  • Material: Copper-Free Aluminum (Die Cast)

Typical Applications

  • Commercial and Industrial Electrical Installations
  • Conduit and Raceway Systems
  • Conductor Pulling, Splicing, and Access Points
  • Directional Changes in Rigid or IMC Conduit Runs
  • Renovation and New Construction Wiring Projects

Why Crouse-Hinds?

Crouse-Hinds conduit bodies are built from die cast copper-free aluminum to deliver dependable, corrosion-resistant performance for professional electrical installations. The LL35CGN's Type LL configuration and rugged aluminum construction make it a reliable choice for electricians who need durable access fittings that support code-compliant, long-lasting conduit systems.

Manufacturer Resources

Product Specs

list_batch:
CRS-20260917
Product Type:
Type LL Conduit Body
Department:
Electrical
Product Subgroup:
Conduit Bodies & Covers
Product Height:
2.68 in
Product Material:
Copper-free Aluminum
Product Length:
5.94 in
Product Weight:
0.64 lb
Product Width:
1.9 in
Product Size:
1"
Product Group:
Conduit & Raceway

Crouse-Hinds LL35CGN – Frequently Asked Questions

1) What does a Type LL conduit body do, and when would I use one instead of a Type LB or LR?
A Type LL body gives you an access opening with the outlet on the left-hand side as you face the cover, so conductors can be pulled, spliced, or redirected at a change of direction in the run. The Crouse-Hinds LL35CGN is the 1-inch version. Pick the LL when the branch has to go left; an LR turns right and an LB turns back toward the wall. The letter is about which way the run leaves the body, so sight the direction on the wall before you order, since the body cannot be rotated to change handing without reorienting the whole fitting.
2) Will the Crouse-Hinds LL35CGN fit 1-inch rigid or IMC conduit?
Yes. The LL35CGN is sized for standard 1-inch conduit and is intended as an access point along rigid metal or intermediate metal conduit (IMC) runs. Both rigid and IMC use the same NPT trade-size threads, so a 1-inch body threads onto either. It will not take 3/4-inch or 1-1/4-inch conduit; order the matching trade size for those runs.
3) Is an aluminum conduit body OK to use next to galvanized steel conduit and dissimilar metals?
The LL35CGN uses a die cast copper-free aluminum alloy, which is specified exactly for that reason: the copper-free formulation reduces the risk of galvanic corrosion when the fitting sits near dissimilar metals. It is the standard choice where a corrosion-resistant, lighter alternative to cast iron or steel bodies is wanted.
4) What is the exact part number I should order for a 1-inch Crouse-Hinds Type LL body?
Order Crouse-Hinds LL35CGN. That is the manufacturer part number for the 1-inch Type LL copper-free aluminum conduit body, and it is the only model offered under this name.
5) Does the LL35CGN come with a cover and gasket, or do I order those separately?
The LL35CGN is supplied as the conduit body itself, in 1-inch trade size and die cast copper-free aluminum. Covers and gaskets for Crouse-Hinds Form series bodies are separate catalogue items matched to the body size and form, so plan on specifying the cover and, where the location calls for it, the gasket alongside the body.
6) Can I use the LL35CGN as a splice point, or only for pulling wire?
Both. It is built to provide access to the conduit run for pulling, splicing, or terminating conductors. Conductor fill and splice volume in a conduit body are governed by NEC rules for the body's cubic-inch capacity, so size your splices to the body's marked volume.
7) Why would a property manager or electrician choose an aluminum body over cast iron for overhead conduit?
Weight. Aluminum bodies weigh noticeably less than cast iron equivalents, which matters when you are working overhead or hanging a long run, and the copper-free alloy still gives corrosion resistance for commercial and industrial installs. Cast iron remains the heavier-duty pick where physical abuse is the main concern; for routine raceway access points the aluminum LL35CGN is easier to handle.
How fast can I get the Crouse-Hinds LL35CGN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Crouse-Hinds LL35CGN come with a warranty?
Absolutely. The Crouse-Hinds LL35CGN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Crouse-Hinds LL35CGN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Crouse-Hinds LL35CGN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!