Crouse-Hinds LTB20090-CRS LTB2...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$57.34
Crouse-Hinds LTB20090-CRS LTB200 Insulated Liquidtight Connector, Malleable Iron

Crouse-Hinds LTB20090-CRS LTB200 Insulated Liquidtight Connector, Malleable Iron

(No reviews yet) Write a Review

Model: LTB20090

In Stock (leaves warehouse same day if ordered before 3pm ET)

$57.34
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Crouse-Hinds LTB20090-CRS LTB200 Insulated Liquidtight Connector, Malleable Iron

The Crouse-Hinds LTB200 is a 2" insulated liquidtight connector built from malleable iron with a zinc electroplated finish for reliable corrosion resistance in demanding electrical environments. Designed to join liquidtight flexible conduit to enclosures, panels, and equipment housings, the LTB200 provides a secure, code-compliant transition point while maintaining a liquidtight seal against moisture intrusion. The integral insulated throat protects conductor insulation from abrasion during and after installation, making this connector a dependable choice for wet, damp, and industrial locations where liquidtight flexible metal conduit (LFMC) is specified. Its rugged malleable iron body and protective zinc electroplated coating are engineered to withstand the rigors of commercial and industrial jobsites, while the insulated throat design helps installers meet code requirements for conductor protection at the point of termination.

Key Features

  • Trade Size: 2" connector sized for use with 2" liquidtight flexible metal conduit runs.
  • Durable Construction: Malleable iron body offers strength and impact resistance for demanding commercial and industrial installations.
  • Corrosion-Resistant Finish: Zinc electroplated coating helps protect the connector against rust and corrosion in exposed or wet environments.
  • Insulated Throat: Built-in insulation shields conductor insulation from sharp metal edges during pulling and termination.
  • Liquidtight Sealing: Engineered to maintain a liquidtight connection between conduit and enclosure, helping keep moisture out of the raceway system.
  • Connector Type: Purpose-built fitting for liquidtight flexible conduit terminations, simplifying installation on panels, motors, and equipment enclosures.

Technical Specifications

  • Product Type: Connector
  • Trade Size: 2"
  • Material: Malleable Iron
  • Finish: Zinc Electroplated
  • Configuration: Insulated
  • Connection: Liquidtight

Typical Applications

  • Commercial and Industrial Electrical Installations
  • Liquidtight Flexible Conduit (LFMC) Systems
  • Motor and Equipment Connections
  • Panel and Enclosure Terminations
  • Wet and Damp Location Wiring

Why Crouse-Hinds?

Crouse-Hinds is a recognized name in rugged electrical fittings built for tough environments. The LTB200 combines a strong malleable iron body with a zinc electroplated finish and an insulated throat, giving installers a durable, moisture-resistant connector for professional liquidtight conduit installations that demand long-term reliability. Electrical contractors trust Crouse-Hinds fittings for consistent fit, finish, and performance across LFMC installations in industrial, commercial, and outdoor environments where moisture and mechanical stress are ongoing concerns.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
CRS-20260917
Product Type:
Connector
Department:
Electrical
Product Subgroup:
Liquidtight Conduit & Fittings
Product Width:
3 in
Product Size:
2"
Product Material:
Malleable Iron
Product Group:
Conduit & Raceway

Crouse-Hinds LTB20090 – Frequently Asked Questions

1) Will the Crouse-Hinds LTB200 connector work with regular flexible metal conduit, or only liquidtight?
It's built for liquidtight flexible metal conduit (LFMC). The sealing gland is what makes the moisture-tight joint at the conduit, so putting it on standard FMC gives you neither the grip nor the seal it's designed for. For plain FMC in a dry location, a squeeze or bite-type FMC fitting such as the Thomas and Betts Tite-Bite 306 is the right family of part instead.
2) What is the difference between the Crouse-Hinds LTB200 liquidtight connector and the RACO 4734 SWIVEL-LOK connector?
Both are liquidtight connectors, but they differ in size, material, and body style. The Crouse-Hinds LTB200 is a 2 inch trade size fitting with a malleable iron body and zinc electroplated finish, offered in a straight body and a 90-degree body, with an insulated throat. The RACO 4734 is a 1 inch Type B multi-position connector molded in nylon and supplied in packs of 100. For a 2 inch LFMC run into a motor or panel, the LTB200 is the one sized for the job; the RACO 4734 covers small-diameter 1 inch terminations where a non-metallic fitting is acceptable and where the multi-position body helps clear tight angles.
3) Can a Thomas & Betts 306 Tite-Bite connector be used in place of a Crouse-Hinds LTB200?
No, they terminate different raceways. The Thomas & Betts 306 is a straight Tite-Bite fitting for 1 inch flexible metal conduit and is non-insulated. The Crouse-Hinds LTB200 is a 2 inch fitting for liquidtight flexible metal conduit with an insulated throat and a liquidtight seal at the enclosure, which is what wet and damp location LFMC terminations call for. A 1 inch dry-location FMC fitting will neither fit 2 inch conduit nor seal against moisture.
4) Do I need an insulated throat connector for a 2 inch liquidtight run?
For larger conductors terminating in a panel, yes, that insulated throat is doing real work. The LTB200 has it built in, so the plastic bushing shields conductor insulation from the metal edge while you're pulling and after the wire settles. Non-insulated bite-type fittings like the Thomas and Betts 306 don't include that protection.
5) Can I use the LTB20090 liquidtight connector in a wet location?
Wet and damp locations are exactly what it's for. The connector maintains a liquidtight seal between the LFMC and the enclosure so moisture stays out of the raceway, and the zinc electroplated finish over malleable iron handles exposure. Typical uses are motor and equipment connections, panel terminations, and outdoor industrial wiring.
6) I need conductor protection at a flexible conduit termination - what are my options besides the Crouse-Hinds LTB200?
The LTB200 carries an integral insulated throat that shields conductor insulation from the metal edge during the pull and afterward, in a 2 inch malleable iron liquidtight body. If the run is 1 inch flexible metal conduit rather than liquidtight, the Thomas & Betts 306 Tite-Bite is a straight FMC fitting, though it is a non-insulated design. For 1 inch liquidtight, the RACO 4734 SWIVEL-LOK is a nylon Type B multi-position connector. Where code requires insulated throat protection on a 2 inch LFMC termination, the LTB200 is the fitting that provides it.
7) Are the Leviton ML2-C and 8319-C connectors alternatives to the Crouse-Hinds LTB200?
No. The Leviton ML2-C is a midget connector for electrical wiring and the Leviton 8319-C is a hospital grade NEMA 5-20R cord connector - both are wiring devices that terminate conductors or cord sets. The Crouse-Hinds LTB200 is a raceway fitting: it mechanically joins 2 inch liquidtight flexible metal conduit to a panel, motor, or enclosure and holds a liquidtight seal at that point. If you are looking for the fitting that lands the conduit on the box, the LTB200 is the part; the Leviton devices serve a different function in the circuit.
8) Is a metal or non-metallic liquidtight connector the better choice for an industrial motor termination?
It depends on the mechanical exposure. The Crouse-Hinds LTB200 uses a malleable iron body with a zinc electroplated finish, which gives impact resistance and corrosion protection for exposed and wet industrial locations, and it is made in 2 inch trade size. The RACO 4734 SWIVEL-LOK is molded nylon in 1 inch, a non-metallic body suited to smaller liquidtight runs. On a 2 inch feed to a motor where the fitting may take knocks, the malleable iron LTB200 matches the duty.
How fast can I get the Crouse-Hinds LTB20090 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Crouse-Hinds LTB20090 come with a warranty?
Absolutely. The Crouse-Hinds LTB20090 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Crouse-Hinds LTB20090?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Crouse-Hinds LTB20090 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!