You may also like
CU TEE-TAP CLAMP 500-1000 500-1000
Manufacturer Resources
Product Specs
- Connection Type:
- Mechanical
- Country Of Origin:
- India (IN)
- Enclosure Type:
- None
- Insulation Material:
- Bare
- Number Of Conductors:
- 2
- Number Of Secondary Ports:
- 1
- Outside Diameter:
- 7/16 in
- Product Group:
- Wire & Cable Management
- Product Type:
- Mechanical Connector
- Selling Unit Of Measure:
- each
- Surface Finishing:
- Bare
- Type2:
- Mechanical connectors
- Voltage Rating:
- 35 kV
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Material:
- Casting of Copper Alloy, Bolts of Silicon Bronze
Blackburn XT34 – Frequently Asked Questions
1) What conductor sizes does the Blackburn XT34 tee-tap clamp accept?
The XT34 is a copper tee-tap clamp sized for 500 to 1000 run conductors with a 500 to 1000 tap. It handles two conductors total: one run through the main and one tap off the single secondary port.
2) Is the Blackburn XT34 tee-tap clamp rated for medium voltage work?
It carries a 35 kV voltage rating, so it is suitable for medium voltage taps as well as standard low voltage distribution. Note it ships bare with no enclosure or insulation, so the connection has to be insulated or covered in the field to suit the application.
3) Can I use the Blackburn XT34 tap clamp on aluminum conductors?
The XT34 is a copper-only connector. The body is a copper alloy casting with silicon bronze bolts, which is a copper-to-copper combination. For aluminum or mixed aluminum-to-copper taps you need a dual-rated AL9CU connector instead.
4) Does the XT34 tee-tap clamp need a compression tool or crimper to install?
No tooling press required. It is a mechanical connector, tightened with bolts, so a wrench or socket is all you need. That makes it workable in a pulled-tight manhole or vault where you cannot get a hydraulic crimper on the conductor.
5) What is the bolt or hardware size on the Blackburn XT34 clamp?
The outside diameter on the XT34 is listed at 7/16 inch. Size your wrench or socket to that when you are figuring out clearance in a tight pull box.
6) Is the Blackburn XT34 sold individually or in a box?
Each XT34 tee-tap clamp is sold as a single unit, so order one per tap connection you are making. Part number is XT34.
7) Does the XT34 come plated or with any protective finish?
It ships bare, no plating or coating on the copper alloy body. For direct burial or wet locations, plan on the usual oxide inhibitor and an insulating cover or tape build over the finished connection.
How fast can I get the Blackburn XT34 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn XT34 come with a warranty?
Absolutely. The Blackburn XT34 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn XT34?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn XT34 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.