You may also like
CU TP 2HL LUG SHRT BRL 300 1/2B WHT
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Group:
- Wire Termination
- Product Type:
- Standard Barrel
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Stud Size:
- 1/2 in
- Sub Brand Label:
- Blackburn
- Type2:
- Cable or wire lug
- Voltage Rating:
- 35 kV
- Department:
- Electrical
- Product Subgroup:
- Lugs
- Product Color:
- White
- Product Material:
- Copper
Blackburn CTL3002 – Frequently Asked Questions
1) Will a 1/2 inch bolt fit the pad on the Blackburn CTL3002?
Yes. The CTL3002 is drilled for 1/2 inch studs, so it lands on a 1/2 inch bus bolt or stud. It is a two-hole pad, which gives you the NEMA-style double bolt landing rather than a single hole.
2) Can the Blackburn CTL3002 be used on medium voltage cable terminations?
It carries a 35 kV voltage rating, so it is suitable for terminations up to medium voltage class, not just 600 V panel work. That rating is one of the main reasons this lug gets specified on shielded MV cable at switchgear and terminators.
3) Can I crimp the Blackburn CTL3002 onto aluminum conductor?
No. The CTL3002 is a copper-bodied lug intended for copper conductors. For aluminum or dual-rated runs you need a lug marked AL9CU or an aluminum-bodied compression lug in the same 300 kcmil range.
4) Is a two-hole lug like the CTL3002 better than a one-hole lug for a switchgear termination?
Two-hole pads are what most gear and bus specs call for on larger conductors because the second bolt stops the lug from rotating under fault or torque and spreads the contact area. The CTL3002 gives you that two-hole pad on a 1/2 inch stud pattern. If your bus or breaker pad is drilled for a single 1/2 inch bolt, a one-hole lug is the correct part instead.
5) What does the white marking on the Blackburn CTL3002 mean?
White is the die color code on this lug. Compression connectors are color coded so the crimp crew can match the lug to the correct die set in the hydraulic tool, and the white code is what you look for when setting up to crimp the CTL3002.
6) Is the Blackburn CTL3002 sold individually or in a bag?
It is sold each, so one lug per unit ordered. On a three-phase plus neutral termination plan your count per feeder end, not per box.
7) Where is the Blackburn CTL3002 made?
Country of origin on the CTL3002 is Mexico. That is the figure to put on a domestic-preference or Buy America submittal review for this connector.
How fast can I get the Blackburn CTL3002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn CTL3002 come with a warranty?
Absolutely. The Blackburn CTL3002 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn CTL3002?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn CTL3002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.