Delaney Barn Door Flat Track Stops (Pair)

Track stops are the small blocks that clamp onto the flat track at each end of the run so the rolling door cannot coast past the track and drop off the end. The Delaney Barn Door Flat Track Stops ship as a pair, one for each end of the track. If your barn door kit did not come with end stops, or you cut the track down and need to reset the travel limits, this is the part that does it.

Flat track only. These Delaney stops are made for flat strap style barn door track, the plain flat bar that mounts to the wall or header board. Box rail and enclosed J track systems use a different stop that fits inside the rail profile, so this pair will not serve those.

Two finishes: US19 Black and US10B Oil Rubbed Bronze. Both are sold as a pair. Pick the one that matches the track and hangers already on the opening, since the stops sit at the visible ends of the track where a mismatch shows.

Delaney lists these stops for its own flat track hardware, and that is the fit we can stand behind. Flat track thickness and width vary between manufacturers, so if you are putting them on a track from another maker, measure the bar and compare it to the clamp opening on the stop before you commit. Matching the Delaney track you already have is the safe path.

Yes. The stops are sold on their own as a pair, so a lost, damaged, or wrong-finish end stop is a parts-level fix rather than a full hardware replacement. For property managers running the same barn door hardware across multiple units, buying stops separately in US19 Black or US10B Oil Rubbed Bronze keeps the fleet consistent without replacing serviceable track and hangers.