Delaney Door Saver Commercial ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$6.25
$5.17
Delaney Hardware Delaney Door Saver Commercial Hinge Pin Door Stop DLY-40120X

Delaney Door Saver Commercial Hinge Pin Door Stop

(No reviews yet) Write a Review

Model: 401204
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$6.25
$5.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Delaney Door Saver Commercial Hinge Pin Door Stop

The DoorSaver Commercial is perfect for large entry doors or commercial applications. All the features of the original DoorSaver with the strength and size necessary for heavier doors.

The DoorSaver Commercial features twice the metal of the original DoorSaver. It has a larger diameter hole which will accommodate the bigger hinge pins common in 4-1/2" - 5" hinges. Hinge mounted to fit all doors with removable hinge pins.

DoorSaver installs in seconds with no tools. It’s hinge-mounted to fit all doors.

DoorSaver is the world’s first and only doorstop that works without touching the door. Its super strong alloy design braces against the hinge, so it will not – and simply cannot – damage doors.

  • Dimensions: 2-1/4" x 2-1/4"
  • Substrate: Zinc

Manufacturer Resources

Product Specs

Subcategory:
Door Stops, Holders, Silencers & Bumpers
Series:
Door Saver Hinge Pin Door Stop
Product Group:
Door Trim and Accessories
Product Subgroup:
Door Stops, Holders, Silencers & Bumpers
Product Type:
Door Stops - Hinge Pin
Product Dimension:
2 1/4" x 2 1/4"
Product Category:
Door Trim and Accessories
Product Substrate:
Zinc
Department:
Door Hardware

Delaney Hardware 401204 – Frequently Asked Questions

1) Will a hinge pin door stop work on my door, or do I need one that mounts to the wall or floor?
The Delaney DoorSaver Commercial mounts on the hinge itself, so it works on any door with removable hinge pins. Nothing touches the door face and nothing gets screwed into your wall or baseboard, which is why it's the usual pick for rental units and corridors where you don't want new holes in the drywall. It braces against the hinge to stop the door. If your doors have non-removable (welded or set-screw) pins, a hinge pin stop won't go on and you need a wall or floor stop instead.
2) Does the Delaney DoorSaver Commercial fit 4-1/2 inch and 5 inch hinges?
Yes. The Commercial version has a larger diameter hole sized for the bigger hinge pins found in 4-1/2 inch and 5 inch hinges, which is the main thing separating it from the standard DoorSaver. Those are the hinge sizes you see on commercial entry doors and heavy solid core doors. If the opening uses standard 3-1/2 inch residential hinges, the original DoorSaver is the one sized for that pin.
3) Will a hinge pin stop hold up on a heavy commercial entry door?
That's what the Commercial version is for. It carries twice the metal of the original DoorSaver, in a zinc alloy body, specifically for large entry doors and heavier commercial slabs. The original is built for lighter interior doors. On a heavy exterior door in a high traffic corridor, the standard size is the one that bends.
4) What is the closest heavy-duty alternative to the Delaney DoorSaver Commercial hinge pin door stop?
The Orca Hardware HPHD HD Hinge Pin Stop is the nearest heavy-duty peer. Both mount on the hinge rather than the door or wall, and both are built for the heavier leaf weights found on commercial entry doors - the Delaney DoorSaver Commercial carries twice the metal of the standard DoorSaver and a larger diameter hole sized for the bigger pins used in 4-1/2 inch to 5 inch hinges. The Orca HPHD is the heavy-duty member of Orca's hinge pin range, sitting above the standard HPDS. For a property manager standardizing a building of commercial openings, either is a hinge-mounted stop; the Delaney is zinc and measures 2-1/4 inch by 2-1/4 inch.
5) Will an Emtek 2241 pivot stop work in place of a Delaney DoorSaver Commercial hinge pin stop?
They are not interchangeable. The Emtek 2241 is a brass pivot stop, a different mechanism that works with the pivot rather than a hinge pin. The Delaney DoorSaver Commercial is hinge-mounted and requires a door with removable hinge pins - it installs in seconds with no tools by bracing against the hinge, and its hole diameter is sized for the pins in 4-1/2 inch to 5 inch hinges. If the opening has butt hinges with removable pins, the Delaney is the right format; if it is a pivot-hung door, the hinge pin stop has nothing to mount to.
6) How much room does a hinge pin door stop take up on the hinge?
The DoorSaver Commercial measures 2-1/4 x 2-1/4 inches. That footprint sits at the hinge barrel, so check clearance where a door swings back close to a return wall, a tall baseboard, or an adjacent frame. It's a bigger body than a standard residential hinge pin stop because of the extra metal.
7) What tools do I need to install a DoorSaver hinge pin stop?
None. Installation is a matter of seconds with no tools, since it goes on at the hinge pin rather than being fastened to the door, wall, or floor. For a property manager doing a whole floor of units, that's the practical difference from a wall stop, which needs anchors and a blocking check behind the drywall.
8) What finishes does the Delaney DoorSaver Commercial hinge pin stop come in?
Three finishes: 613 Satin Bronze Oil-Rubbed, 619 Satin Nickel, and 625 Bright Chrome. Those are standard BHMA finish numbers, so 619 lines up with satin nickel lever trim and 625 with polished chrome hardware already hanging on the opening. If you're standardizing a building, order the number that matches the hinges rather than eyeballing the door lever.
9) Will a hinge pin stop damage the door or the finish?
No. The DoorSaver works without touching the door at all. Its alloy body braces against the hinge, so there's no rubber tip pressing into the face and no fastener going through the stile. That's the appeal on painted or veneer doors where a conventional stop leaves a mark.
10) What other hinge pin door stops are there besides the Delaney DoorSaver Commercial?
For a heavy duty equivalent, Orca Hardware makes the HPHD HD Hinge Pin Stop, and Orca's HPDS and HPST Series are the lighter hinge pin stops in the same family. Emtek's 2241 is a brass hinge pivot stop if you want a brass body rather than zinc. The Delaney is zinc and is the one specifically built out for 4-1/2 inch to 5 inch hinge pins.
11) Will a hinge pin stop hold the door open, or does it only stop it?
The DoorSaver Commercial is a stop. It limits how far the door swings so the lever doesn't hit the wall, and it does not latch the door in the open position. If you need the door held open, the Orca Hardware HPDS and HPHD hinge pin units are listed as door holders. Note that on a fire rated opening, holding a door open needs hardware rated for that use.
12) What hinge pin stop should I use if I need the door to hold open rather than just stop?
The Orca Hardware HPDS, HPHD and HPST hinge pin units are all listed with a door holder function, so they address holding the leaf as well as limiting swing. The Delaney DoorSaver Commercial is a hinge pin door stop that braces against the hinge to arrest the door before it contacts the wall, without touching the door face. For a facility where corridor doors need to stand open during moves or deliveries, the Orca door holder units are the ones to specify; where the requirement is protecting drywall and door faces on heavy commercial entries, the Delaney DoorSaver Commercial in zinc is the direct answer.
13) How do I tell the Orca HPST hinge pin stop apart from the Delaney DoorSaver Commercial when specifying?
Order by part identity, not description - both are hinge pin stops and read alike on a takeoff. The Orca HPST Series Hinge Pin Stop is a door holder unit in Orca's hinge pin line, sold alongside the standard HPDS and the heavy-duty HPHD. The Delaney DoorSaver Commercial is part number DLY-40120X, a zinc unit measuring 2-1/4 inch by 2-1/4 inch, offered in 613 satin bronze oil-rubbed, 619 satin nickel and 625 bright chrome. A distributor filling a commercial entry package should call out the Delaney by that part number and the finish code.
How fast can I get the Delaney Hardware 401204 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Delaney Hardware 401204 come with a warranty?
Absolutely. The Delaney Hardware 401204 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Delaney Hardware 401204?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Delaney Hardware 401204 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!