You may also like
Delaney Door Saver II Hinge Pin Door Stop
This Hinge Pin Door Stop from DoorSaver incorporates an ultra-low-profile design replaces the hinge pin to create bumperless protection for doors and trim. DoorSaver II is simple to install, looks great and stays in place without "working up." Be sure to have at least .25 inch space between your trim and the hinge barrel. The two cams need to contact the hinge plate on both sides in order for the products to perform optimally.
- Bumperless design eliminates damage to doors and trim
- Replaces the exisitng hinge pin
- Installs in seconds, No tools required
- Adjustable swing angle
- Hinge mounted to fit all doors
- Won't work up like conventional hinge-mounted products
- Made from strong carbon steel
- Substrate: Zinc
Manufacturer Resources
Product Specs
- Subcategory:
- Door Stops, Holders, Silencers & Bumpers
- Series:
- Door Saver Hinge Pin Door Stop
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Door Stops, Holders, Silencers & Bumpers
- Product Type:
- Door Stops - Hinge Pin
- Tags:
- doorsaver, door saver 2
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Zinc
- Department:
- Door Hardware
Delaney Hardware 402301 – Frequently Asked Questions
1) Will a Delaney Door Saver II hinge pin door stop fit my door if the casing is tight to the hinge?
Clearance is the thing that kills this install. The Door Saver II needs at least .25 inch of space between the trim and the hinge barrel, because its two cams have to contact the hinge plate on both sides to work. If your casing sits tighter than a quarter inch to the barrel, the cams won't seat and you want a baseboard or floor-mounted stop instead.
2) How does the Door Saver II hinge pin stop install, and do I need tools or to take the door down?
It replaces the existing hinge pin. Pull the old pin from one hinge, drop the Door Saver II in its place, and you're done. No tools, no drilling, no removing the door, and nothing fastened to the wall or floor. That's what makes it a fast fix on an occupied unit where you don't want to patch and paint afterward.
3) Should I use a hinge pin stop or a wall or floor stop to protect the wall behind a door?
A hinge pin stop like the Door Saver II stops the door at the hinge itself, so there's no bumper on the wall and no base-mounted stop for a vacuum to catch. The trade-off is that all the stopping force goes through the hinge, so it suits interior doors in apartments, offices and hotel rooms rather than heavy exterior or high-traffic doors. Where the door is heavy or slammed hard, put the stop at the base or the wall and take the load off the hinge. The Door Saver II is also bumperless, so there's no rubber tip to mark the door or the trim.
4) Do hinge pin door stops slide up the pin over time? Will this one stay put?
That is the standard failure of conventional hinge-mounted stops, and the Door Saver II is built specifically not to do it. It stays in place without "working up" the pin, so a property manager isn't back in the same unit resetting stops after a few hundred cycles. Its two cams bear on the hinge plate on both sides, which is what holds the position.
5) Does a hinge pin stop work on any door, or do I need a specific hinge size?
The Door Saver II is hinge mounted to fit all doors, so it isn't sized to a particular door width or thickness the way a mortised or bored device is. The one condition that decides it is clearance: you need a quarter inch minimum between the trim and the hinge barrel for the cams to seat on the hinge plate.
6) What is the closest alternative to the Delaney Door Saver II hinge pin door stop if there is less than 1/4 inch between the trim and the hinge barrel?
The Door Saver II is a bumperless hinge pin stop that replaces the existing hinge pin, and it needs at least .25 inch of space between the trim and the hinge barrel so its two cams can contact the hinge plate on both sides. Where the trim sits tighter than that, the Emtek 2241 Brass Hinges Pivot Stop is a pivot-style stop that mounts at the hinge in place of a cam-and-barrel hinge pin stop. The Orca Hardware HPDS Hinge Pin Door Stop is the other hinge pin option to look at when the opening allows a conventional hinge pin stop.
7) What is the equivalent of a Delaney Door Saver II hinge pin door stop from another brand?
The Orca Hardware HPDS Hinge Pin Door Stop is the direct counterpart - a hinge pin stop in the HPDS Series that, like the Door Saver II, mounts at the hinge rather than at the floor or the baseboard. The Orca Hardware HPST Series Hinge Pin Stop is a second hinge pin stop from the same brand. The Door Saver II is the bumperless one of the group: it eliminates the rubber bumper that contacts the trim, and it is made from carbon steel over a zinc substrate.
8) Can I set how far the door opens with a Delaney Door Saver II?
Yes, the swing angle is adjustable, so you set where the door stops rather than accepting a fixed opening. Useful when you want a door to clear a light switch, a return-air grille or a piece of furniture but still open wide enough to be practical.
9) What finishes does the Delaney Door Saver II hinge pin stop come in for matching existing door hardware?
Five finishes: 605 bright brass, 613 satin bronze oil-rubbed, 619 satin nickel, 622 matte black, and 625 bright chrome. Those are BHMA finish numbers, so you can match them straight against the number stamped on or specified for the levers and hinges already in the building rather than eyeballing a color name.
10) What else does ZenSupply carry if I want a hinge pin door stop that also holds the door open?
The Delaney Door Saver II is a stop, not a holder. If you need the door to stay parked open, the Orca Hardware HPDS Series and HPST Series hinge pin stops and the heavier-duty HPHD Series are listed with a door holder function. Same hinge pin mounting concept, different job.
11) I have a pivot instead of a butt hinge. Will a hinge pin stop work?
No. The Door Saver II replaces a hinge pin and needs a hinge plate for its cams to bear on, so a door hung on pivots gives it nothing to work against. For pivot-hung doors look at the Emtek 2241 brass pivot stop instead.
12) For a high-traffic commercial opening, is there a heavier duty hinge pin stop than the Delaney Door Saver II?
The Orca Hardware HPHD HD Hinge Pin Stop is the heavy duty hinge pin stop in the group - HPHD Series, catalogued as a door holder. The Delaney Door Saver II is made from strong carbon steel on a zinc substrate and is designed not to work up out of position the way conventional hinge mounted stops do, which is the failure mode that drives repeat service calls on apartment and office doors. Both mount at the hinge, so either can be swapped in on an existing door without drilling the wall or floor.
13) Does the Emtek 2241 pivot stop do the same job as a Delaney Door Saver II hinge pin door stop?
Not quite - the Emtek 2241 is a Hinges Pivot Stop, a brass pivot stop, while the Door Saver II is a hinge pin stop that replaces the existing hinge pin and installs in seconds with no tools. If the requirement is a drop-in swap of the hinge pin on an existing door, the Door Saver II or the Orca Hardware HPDS Hinge Pin Door Stop are the hinge pin stops; the 2241 is the pivot stop and should be confirmed against the hinge or pivot already in the opening before it is ordered as a substitute.
14) Which hinge pin stop should be specified when the door needs to be held open rather than just stopped?
The Orca Hardware HPDS, HPHD, and HPST hinge pin stops are all catalogued with a door holder function, so they are the ones to look at when the opening needs the door held at position. The Delaney Door Saver II has an adjustable swing angle and works bumperless, so it sets where the door stops without a rubber bumper striking the trim. Across a fleet of doors, mixing the two means two different behaviors at the same hinge location, so it is worth standardizing on one per building.
15) What is the Delaney Door Saver II made of, and will it hold up in a rental turn?
Carbon steel, on a zinc substrate. That's a metal-on-metal stop with no rubber tip or plastic bumper to tear off, which is the part that usually fails first on a low-cost stop in a rental or student housing turn.
16) Do I need one Door Saver II per door or one per hinge?
One per door. It substitutes for a single hinge pin, typically on the center or top hinge, and the adjustable cams set the stopping angle from that one location. Ordering for a building, count doors and not hinges, then pick the finish to match the existing lever trim.
17) Which hinge pin stop comes in matte black and oil rubbed bronze to match existing door hardware?
The Delaney Door Saver II hinge pin door stop is offered in 622 Matte Black, 613 Satin Bronze Oil-Rubbed, 619 Satin Nickel, 605 Bright Brass, and 625 Bright Chrome, so it can be matched to the lever and hinge finishes already on the doors. The Emtek 2241 Hinges Pivot Stop is a brass pivot stop, which is the other route when the opening runs a pivot rather than a hinge pin stop.
How fast can I get the Delaney Hardware 402301 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Delaney Hardware 402301 come with a warranty?
Absolutely. The Delaney Hardware 402301 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Delaney Hardware 402301?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Delaney Hardware 402301 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.