You may also like
Delaney RH Series - SD Style Keyed Entrance Door Leverset
Product Technologies:
Keyed Entry Function: Delaney keyed entry knobs and levers are able to be locked from the exterior with a key, and then locked or unlocked from the inside with a turn-button.
Inside pushbutton locks outside lever. Turning inside lever or using outside key releases inside button automatically. Closing door does not release button. Button is fixed in the locked position by turning to horizontal position.
Features:
- Concealed Mounting Screws
- Protective Sleeve
- Interlocking Screw Posts
- Push Button Locking
- GR2 Regency Lever- Turn Locking
- Panic Proof
Specifications:
Backset: Adjustable 2-3/8” and 2-3/4”
Door Thickness: 1-3/8” ~ 2”
Cylinder: SC4 6-pin standard. KW1 5-pin optional Entries packed KA2, SC1 5-pin optional
Strikes: 1-1/8” x 2-3/4” T-strike (9101)
Door Handing: Not required
Door Prep:
- Cross bore: 2-1/8”
- Edge bore: 1”
- Latch face: 1” x 2-1/4”
Latches:
- Entrance: 2-3/8” & 2-3/4” adjustable (9060 UL)
- Passage/Privacy: 2-3/8” & 2-3/4” adjustable (9064
- Faceplate: 1” x 2-1/4” round corner
- Bolt: 1/2” throw. Meets 3-Hr Fire Rating
ANSI & Federal Standards:
- Meets requirements of BHMA/ANSI A156.2 Series 4000, GR2, 400,000 Cycles.
Manufacturer Resources
Product Specs
- Subcategory:
- Bored Locksets
- Series:
- RH Series
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Commercial
- Lock Function:
- Entrance
- Product Type:
- Leverset
- Grade:
- Grade 2
- Product Attribute:
- Cylindrical Locks
- Product Function:
- Entrance
- Product Finish:
- US26D Dull Chrome
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Delaney Hardware 371322 – Frequently Asked Questions
1) What door prep does this Delaney RH lever need, and can it go into an existing bore?
It drops into standard cylindrical prep: 2-1/8 inch cross bore, 1 inch edge bore, and a 1 x 2-1/4 inch latch face with round corners. The strike is a 1-1/8 x 2-3/4 inch T-strike (9101). If your existing lockset used that same 2-1/8 inch bore, no new boring is needed.
2) Do I have to specify handing when ordering the Delaney RH Series leverset?
No. Handing is not required on the RH Series entrance leverset, so the same part works on left- and right-hand doors, in or out swinging. That is what makes it easy to stock one part number across a building.
3) What keyway options do I have to pick, and can I get multiple locks keyed alike?
Keyway and keying are both required selections. Keyway choices are SC4 6-pin (standard), KW1 5-pin, or SC1 5-pin. Keying is keyed different or keyed alike, with a key charge option if you need a specific key setup. Entrance units are packed KA2 as standard.
4) Is this Delaney leverset rated for a fire door?
The latch bolt on the RH Series entrance unit meets a 3-hour fire rating, and the entrance latch is a UL unit (9060 UL). Bolt throw is 1/2 inch.
5) I need a lever for a restroom door, not a keyed entry - what should I use instead of the Delaney RH Series SD Style leverset?
The Delaney RH Series SD Style lever in dull chrome (US26D) is an entrance function lock - it locks from the outside with a key and from the inside with a turn-button, which is more than a restroom door needs. For a restroom or other single-occupancy room, the Cal-Royal INDLEV-20 is a privacy function leverset with a red/green occupancy indicator, so anyone outside can see at a glance whether the room is in use. Both are cylindrical levers prepped for a 2-3/8 inch or 2-3/4 inch backset, so the door prep carries over.
6) Is the Cal-Royal INDLEV-20 a drop-in replacement for a Delaney RH Series SD Style entrance lever?
No - they are different functions. The Delaney RH Series SD Style is a keyed entrance leverset with a cylinder on the outside and push-button locking inside, while the Cal-Royal INDLEV-20 is a privacy indicator lever with no key cylinder. If the opening needs to be secured with a key, the INDLEV-20 will not do it. They share the cylindrical lever format and both work on 2-3/8 inch and 2-3/4 inch backsets, so substituting one for the other is a function change, not a prep change.
7) Is a Grade 2 lever enough for an apartment building or office entry door?
It meets BHMA/ANSI A156.2 Series 4000, Grade 2, at 400,000 cycles, and is catalogued for commercial use. That is the normal choice for multi-family unit entry doors, offices, and moderate-traffic commercial openings. For very high-traffic main entrances, a Grade 1 cylindrical lock is the step up.
8) How does the locking actually work on this keyed entrance lever?
Inside pushbutton locks the outside lever. Turning the inside lever or using the outside key releases the button automatically, and closing the door does not release it. To hold it locked permanently, turn the button to the horizontal position. It is panic proof, meaning the inside lever always retracts the latch for egress.
9) I need a bathroom or bedroom lever, not a keyed one. Is this the right part?
No. This RH Series unit is a keyed entrance function, so it takes a cylinder and key. For a restroom or bedroom door you want a privacy lever instead, such as the Cal-Royal INDLEV-20, which is a privacy function with a red/green occupancy indicator and adjusts to 1-3/8 to 1-3/4 inch doors.
10) Which lever handles a 2 inch thick door, the Delaney RH Series SD Style or the Cal-Royal INDLEV-20?
The Delaney RH Series SD Style entrance leverset fits doors from 1-3/8 inch up to 2 inch thick. The Cal-Royal INDLEV-20 privacy indicator lever is adjustable for 1-3/8 inch to 1-3/4 inch doors. For a 2 inch leaf - thicker commercial or clad doors - the Delaney RH Series covers the range.
11) I need an ANSI Grade 2 lever for a commercial opening - does the Cal-Royal INDLEV-20 meet that?
The Delaney RH Series SD Style entrance leverset is a Grade 2 lock that meets BHMA/ANSI A156.2 Series 4000, Grade 2 at 400,000 cycles, with a 1/2 inch throw latch that meets a 3-hour fire rating. The Cal-Royal INDLEV-20 is described as standard duty commercial grade. If your spec calls out ANSI A156.2 Grade 2 by name, the Delaney RH Series is the one that states it.
12) What finish is the Delaney RH SD leverset, and will it match my existing satin chrome hardware?
Finish is US26D dull chrome, the satin chrome standard used across most commercial openings, so it matches existing US26D closers, exit devices, and hinges.
13) Does this Delaney lever come with the latch and strike, or do I order those separately?
The entrance set uses the 9060 UL adjustable latch with a 1 x 2-1/4 inch round-corner faceplate and the 9101 T-strike. Mounting uses concealed screws with interlocking screw posts and a protective sleeve on the spindle. Passage and privacy versions in the same series use the 9064 latch instead.
How fast can I get the Delaney Hardware 371322 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Delaney Hardware 371322 come with a warranty?
Absolutely. The Delaney Hardware 371322 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Delaney Hardware 371322?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Delaney Hardware 371322 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.