You may also like
Delaney RH Series - SD Style Keyed Storeroom Door Leverset
Product Technologies:
Storeroom Function: Deadlocking latch bolt operated by key in outside lever or rotating inside lever. Outside lever always locked.
Features:
- Concealed Mounting Screws
- Protective Sleeve
- Interlocking Screw Posts
- Push Button Locking
- GR2 Regency Lever- Turn Locking
- Panic Proof
Specifications:
Backset: Adjustable 2-3/8” and 2-3/4”
Door Thickness: 1-3/8” ~ 2”
Cylinder: SC4 6-pin standard. KW1 5-pin optional Entries packed KA2, SC1 5-pin optional
Strikes: 1-1/8” x 2-3/4” T-strike (9101)
Door Handing: Not required
Door Prep:
- Cross bore: 2-1/8”
- Edge bore: 1”
- Latch face: 1” x 2-1/4”
Latches:
- Entrance: 2-3/8” & 2-3/4” adjustable (9060 UL)
- Passage/Privacy: 2-3/8” & 2-3/4” adjustable (9064
- Faceplate: 1” x 2-1/4” round corner
- Bolt: 1/2” throw. Meets 3-Hr Fire Rating
ANSI & Federal Standards:
- Meets requirements of BHMA/ANSI A156.2 Series 4000, GR2, 400,000 Cycles.
Manufacturer Resources
Product Specs
- Subcategory:
- Bored Locksets
- Series:
- RH Series
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Commercial
- Lock Function:
- Storeroom
- Product Type:
- Leverset
- Grade:
- Grade 2
- Product Attribute:
- Cylindrical Locks
- Product Function:
- Storeroom
- Product Finish:
- US26D Dull Chrome
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Delaney Hardware 376322 – Frequently Asked Questions
1) Will the Delaney RH Series storeroom leverset fit a 1-3/8 inch door, or is it only for 1-3/4?
Door thickness range on the RH Series SD leverset is 1-3/8 inches through 2 inches, so it covers older 1-3/8 interior doors, standard 1-3/4 commercial doors, and thicker slabs up to 2 inches without a special kit.
2) Does the Delaney RH lockset work with a 2-3/8 inch backset or a 2-3/4 inch backset?
Both. The latch is adjustable for 2-3/8 inch and 2-3/4 inch backsets, which are the two standard bored-door backsets, so one part covers residential-prep and commercial-prep doors alike.
3) Will this Delaney leverset drop into an existing 2-1/8 inch bore without redrilling the door?
Yes, if the door has the standard cylindrical prep: 2-1/8 inch cross bore, 1 inch edge bore, and a 1 x 2-1/4 inch latch face. Those are the RH Series SD prep dimensions, so a door already set up for a tubular lockset takes it straight.
4) Do I need to order this storeroom leverset left hand or right hand?
No handing required. The RH Series SD leverset is non-handed, so one part works on left or right swing doors and you do not need to specify handing on the order.
5) What does storeroom function actually do on this Delaney lever?
The outside lever is always locked. Entry from outside is by key only; the inside lever always retracts the deadlocking latch for free egress. There is no way to leave the outside lever unlocked, which is why it is used on storage, mechanical, and electrical rooms rather than offices.
6) Can I key this Delaney leverset to my existing Schlage or Kwikset keys?
Keyway is a required choice at order: SC4 6-pin is standard, with KW1 5-pin and SC1 5-pin available. Pick SC1 or SC4 to run on Schlage-style keys, KW1 for Kwikset-style. You also choose keyed different or keyed alike, so a run of storage doors can share one key.
7) Is this Delaney lever heavy enough for a commercial building, and is it fire rated?
It is a commercial Grade 2 lockset meeting BHMA/ANSI A156.2 Series 4000 at 400,000 cycles, and the latch bolt meets a 3-hour fire rating. Grade 2 suits moderate-traffic openings such as multi-family storage, back-of-house, and light commercial; Grade 1 is the specification for high-abuse main entries.
8) Is the Cal-Royal INDLEV-20 a keyed substitute for the Delaney RH Series SD Style storeroom lever?
No. The INDLEV-20 is a privacy indicator lever, not a keyed lock, so it will not secure a stockroom, electrical closet or janitor room. The Delaney RH Series SD Style is a Grade 2 storeroom leverset keyed with an SC4 6-pin cylinder standard, with KW1 5-pin and SC1 5-pin as keyway options and keyed-alike or keyed-different keying. If the opening must be locked and opened by key, the Delaney is the one that does it.
9) What lever should be used on a restroom door instead of the Delaney RH Series SD Style storeroom leverset?
The Delaney RH Series SD Style is a storeroom function lock: the deadlocking latch is operated by key in the outside lever, and the outside lever is always locked. That is wrong for a restroom, where the occupant needs to lock from inside without a key. The Cal-Royal INDLEV-20 is a privacy indicator leverset with a red/green occupancy indicator, which is the function built for restrooms and changing rooms. Both use 2-3/8 inch and 2-3/4 inch backsets, so the same door prep carries over.
10) Will a Cal-Royal INDLEV-20 fit the same door thickness as the Delaney RH Series SD Style leverset?
Not across the full range. The Delaney RH Series SD Style storeroom leverset covers doors 1-3/8 inch through 2 inch thick, while the Cal-Royal INDLEV-20 adjusts for 1-3/8 inch to 1-3/4 inch. On a standard 1-3/4 inch commercial door either works; on a thicker door above 1-3/4 inch, stay with the Delaney.
11) I need a lever for a restroom, not a storeroom. What should I use instead?
A storeroom lock is the wrong function for a restroom because the outside lever is permanently locked and takes a key. For an occupied-room door, use a privacy lever such as the Cal-Royal INDLEV-20, which adds a red/green occupancy indicator and also covers 2-3/8 and 2-3/4 inch backsets.
12) For standardizing levers across a building, how do the Delaney RH Series SD Style and the Cal-Royal INDLEV-20 line up on duty rating?
The Delaney RH Series SD Style carries a Grade 2 rating and meets BHMA/ANSI A156.2 Series 4000 at 400,000 cycles, and its latch bolt meets a 3-hour fire rating. The Cal-Royal INDLEV-20 is described as standard duty commercial grade. A facility that writes ANSI Grade 2 into its hardware standard can hold the Delaney on the keyed openings and use an indicator privacy lever only where occupancy signaling is the requirement.
13) Will the dull chrome finish match the other brushed hardware in my building?
The finish is US26D dull chrome, the standard satin chrome commercial finish, so it sits alongside satin chrome closers, exit devices, and hinges. It will not match a satin stainless (US32D) run exactly, though the two are close enough that many facilities mix them.
14) Can the mounting screws on this Delaney leverset be reached from outside the door?
No. Mounting screws are concealed, with interlocking screw posts and a protective sleeve on the spindle, so there is nothing exposed on the secure side for someone to back out.
How fast can I get the Delaney Hardware 376322 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Delaney Hardware 376322 come with a warranty?
Absolutely. The Delaney Hardware 376322 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Delaney Hardware 376322?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Delaney Hardware 376322 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.