You may also like
Delaney RH Series - SD Style Privacy Door Leverset
Product Technologies:
Privacy Function: Privacy door hardware features a locking mechanism on the interior for use on bedroom and bathroom doors where locking is needed. The exterior side features a small pin hole to unlock the door hardware from the outside.
Features:
- Concealed Mounting Screws
- Protective Sleeve
- Interlocking Screw Posts
- Push Button Locking
- GR2 Regency Lever- Turn Locking
- Panic Proof
Specifications:
Backset: Adjustable 2-3/8” and 2-3/4”
Door Thickness: 1-3/8” ~ 2”
Strikes: 1-1/8” x 2-3/4” T-strike (9101)
Door Handing: Not required
Door Prep:
- Cross bore: 2-1/8”
- Edge bore: 1”
- Latch face: 1” x 2-1/4”
Latches:
- Entrance: 2-3/8” & 2-3/4” adjustable (9060 UL)
- Passage/Privacy: 2-3/8” & 2-3/4” adjustable (9064
- Faceplate: 1” x 2-1/4” round corner
- Bolt: 1/2” throw. Meets 3-Hr Fire Rating
ANSI & Federal Standards:
- Meets requirements of BHMA/ANSI A156.2 Series 4000, GR2, 400,000 Cycles.
Manufacturer Resources
Product Specs
- Subcategory:
- Bored Locksets
- Series:
- RH Series
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Commercial
- Lock Function:
- Privacy
- Product Type:
- Leverset
- Grade:
- Grade 2
- Product Attribute:
- Cylindrical Locks
- Product Function:
- Privacy/Bed/Bath
- Product Finish:
- US26D Dull Chrome
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Delaney Hardware 372322 – Frequently Asked Questions
1) Will the Delaney RH Series SD privacy leverset fit a 1-3/8 inch interior door?
Yes. The RH Series SD privacy leverset covers door thicknesses from 1-3/8 inches up to 2 inches, so it works on older 1-3/8 inch interior doors as well as standard 1-3/4 inch commercial doors. Backset is adjustable between 2-3/8 and 2-3/4 inches, so it drops into either of the two common bore positions.
2) What door prep does this Delaney privacy lever need, and can it reuse an existing bore?
Standard cylindrical prep: 2-1/8 inch cross bore, 1 inch edge bore, and a 1 x 2-1/4 inch latch face mortise. If the door already carries a standard 2-1/8 inch bore from another tubular lockset, the Delaney RH Series lever goes into it without new boring.
3) Is this Delaney lever rated for a fire door in an apartment corridor or hotel bathroom?
The bolt meets a 3-hour fire rating, and the lockset meets BHMA/ANSI A156.2 Series 4000, Grade 2 at 400,000 cycles. That combination suits bedroom and bath openings in multi-family and hospitality work where a rated door assembly is involved.
4) How does the privacy function lock and unlock on this leverset?
Locking is from the inside only, by push button or by turning the Regency lever. The outside face has a small pin hole for emergency release, and the lock is panic proof, so turning the inside lever retracts the latch and unlocks in one motion. That is the behavior code officials expect on bedroom and bathroom doors.
5) What privacy lever should I use if staff need to see whether a restroom is occupied without trying the handle?
For an occupancy cue, the Cal-Royal INDLEV-20 privacy leverset carries a red/green occupancy indicator and is offered with 2-3/8 inch and 2-3/4 inch backsets. The Delaney RH Series SD Style privacy leverset is a plain privacy function with push button locking on the inside and a small pin hole on the outside for emergency release, so it locks the same way but gives no visual status. Single-occupancy restrooms and changing rooms are where the indicator earns its place; bedroom and bath doors generally do not need it.
6) Will a Cal-Royal INDLEV-20 fit the same doors as the Delaney RH Series SD Style privacy lever?
Both use 2-3/8 inch and 2-3/4 inch backsets, so the cross bore location is common. The difference is door thickness: the Delaney RH Series SD Style privacy leverset is adjustable for 1-3/8 inch through 2 inch doors, while the Cal-Royal INDLEV-20 adjusts 1-3/8 inch to 1-3/4 inch. On a thick door above 1-3/4 inches, the Delaney is the one that covers it.
7) Do I need to specify handing when ordering a Delaney RH Series privacy leverset?
No handing is required. The RH Series SD privacy lever is non-handed, so one part number covers left and right hand doors, which keeps a property manager's spare stock simple.
8) Is this a residential lever or is it built for commercial traffic?
It is classified commercial. Grade 2 at 400,000 cycles puts the RH Series SD lever in light to medium commercial duty, which is the normal specification for apartment bedrooms, dorm rooms, offices, and hotel bathrooms. Heavy-traffic public restrooms in a school or stadium are usually specified Grade 1 instead.
9) Is there a privacy lever with an occupied indicator instead of a plain push button?
Yes, if staff need to see at a glance whether a restroom is in use, the Cal-Royal INDLEV-20 is a privacy indicator leverset with a red/green occupancy indicator, also with 2-3/8 and 2-3/4 inch backsets. Note its door thickness range is adjustable 1-3/8 to 1-3/4 inches, narrower than the Delaney RH Series range of 1-3/8 to 2 inches, so on a 2 inch door the Delaney is the one that fits.
10) Which latch comes with the privacy version of the Delaney RH Series?
Privacy and passage functions use the 9064 latch, adjustable 2-3/8 and 2-3/4 inch. The 9060 UL latch is the entrance-function latch, not the privacy one, so if you are pulling replacement latches for bedroom and bath doors, order 9064.
11) For a commercial bathroom door that needs a documented cycle rating, which privacy lever do I specify?
The Delaney RH Series SD Style privacy tubular leverset is a Grade 2 commercial lockset meeting BHMA/ANSI A156.2 Series 4000, Grade 2 at 400,000 cycles, with a 1/2 inch throw latch bolt that meets a 3-hour fire rating. The Cal-Royal INDLEV-20 is described as standard duty commercial. If your submittal calls out an ANSI grade and cycle count, the Delaney is the one that states them.
12) Is the dull chrome finish on this Delaney lever the same as brushed nickel or satin stainless?
The finish is US26D dull chrome, a satin chrome. It reads cooler and slightly brighter than brushed nickel (US15) and is not the same as satin stainless (US32D), so mixing it on the same corridor with those finishes will show a difference.
13) Will the mounting screws be visible after install?
No. The RH Series SD lever uses concealed mounting screws with interlocking screw posts, so the rose face is clean once mounted. A protective sleeve is included to keep the finish intact during installation, which matters when a crew is hanging dozens of units on a turn.
How fast can I get the Delaney Hardware 372322 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Delaney Hardware 372322 come with a warranty?
Absolutely. The Delaney Hardware 372322 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Delaney Hardware 372322?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Delaney Hardware 372322 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.