Deltana 6413 Morant Lever Passage

Both. The latch on the 6413 Morant set is adjustable between 2-3/8 and 2-3/4 inches, which are the two backsets used on residential doors, so you do not need to measure from the door edge to the center of the bore before ordering. Set it to whatever the existing prep is.

Non-handed. The Morant lever is universal, so one set goes on either a left or right swinging door. For a property manager buying several for a building, that means no counting hands before the order and no wrong-hand returns.

It does not lock. Passage function means the levers always retract the latch from both sides, with no key and no privacy button. It is the right choice for a hallway, closet, or pantry door. For a bedroom or bathroom you want a privacy set with a thumbturn inside, and for an exterior or office door you want a keyed entry function.

It is a residential set. The 6413 Morant is built as a tubular lockset in steel and zinc for interior residential doors. For a corridor, office, or anything on a commercial door schedule, look at a Grade 1 or Grade 2 cylindrical passage lock instead, such as the Falcon K101 (Grade 1, heavy duty, fits 1-3/8 to 2-1/4 inch doors) or the Hager 2510 Withnell (Grade 2, 1-3/8 to 2 inch doors).

The Deltana 6413 Morant is a non-keyed tubular passage lever for hall and closet doors, with a universal hand and an adjustable 2-3/8 or 2-3/4 inch backset. The Kwikset 200BRNL RDT Breton is also a Grade 3 passage lever, fitting doors 1-3/8 to 1-3/4 inch thick, while the Callan Asheville is a Grade 3 passage leverset in a satin nickel finish. Bravura also builds passage leversets in Grade 2 across several lever styles, including the Atlanta and Orlando with round trim and the Tampa with square trim, so the choice among them comes down to lever shape and rose profile rather than function.

The Morant 6413 is built for residential use in steel and zinc. For an opening that carries commercial traffic, the Falcon K101 is a Grade 1 heavy duty passage cylindrical lock with non-handed levers, fire rated, fitting doors 1-3/8 to 2-1/4 inch thick. The Falcon T101 is another Grade 1 heavy duty passage lever, and the Corbin Russwin CL3110 is a Grade 1 vandal resistant passage/closet lever, fire rated, for 1-3/4 to 2 inch doors. Design Hardware X75 covers the same passage function at Grade 1 on a 1-3/4 inch door with a flat lever.

The Morant 6413 is non-keyed passage only, so the lever always turns and nothing latches shut. For a bedroom or bath, the Baldwin Estate 5103 privacy lever with the 5048 rose covers privacy function, as does the Kwikset 300BRNL RDT Breton privacy lever at Grade 3 for doors 1-3/8 to 1-3/4 inch. Hager 2540 is a Grade 2 privacy cylindrical lock with the Withnell lever for doors 1-3/8 to 2 inch. Arrow MK02-TA is a privacy cylindrical lock with a Tudor knob rather than a lever, and is fire rated.

The Morant 6413 has no cylinder and no key. For a keyed opening, Hager 2525 is a Grade 2 commercial entry lock with a lever handle for doors 1-3/8 to 2 inch, and Cal-Royal AG00 is a Grade 2 entrance lever with a 6-pin Schlage C keyway keyed different on a 2-3/8 inch backset. Cal-Royal AG05 is a Grade 2 storeroom lever with a deadlocking latchbolt, and Hager 2580 is a Grade 2 storeroom lever in the Withnell design. For a heavier keyed entry, Dexter C1000 offers a Grade 1 entry/office clutching lever for doors 1-3/8 to 1-3/4 inch.

No. The Morant 6413 is a passage lever with a working latch, so the lever retracts a latchbolt and holds the door closed. A dummy lever is fixed trim with no latch at all, mounted on a surface for pull only. Baldwin Estate 5103 comes as a half dummy in left hand and right hand versions with the 5048 rose, Callan Bentley is a Grade 2 dummy lever, and BEST offers dummy trim in both the 9K Series 1DT at Grade 1 heavy duty and the 7KC Series at Grade 2 medium duty. Emtek supplies dummy pairs in the Arts and Crafts, Hammered, and Cortina lever styles for inactive doors.

The Morant 6413 fits doors 1-3/8 to 2 inches thick. Hager 2510 is a Grade 2 passage lever in the Withnell design covering the same 1-3/8 to 2 inch range, and Falcon K101 is a Grade 1 heavy duty passage lock reaching 1-3/8 to 2-1/4 inches. Arrow GL01 is a Grade 2 non-keyed passage lock with the Sierra lever but starts at 1-3/4 inches, and Design Hardware J75 is a Grade 2 passage lever built for a 1-3/4 inch door, so neither covers the thinner doors the 6413 takes.

The 6413 Morant is passage only, so it will not do a bedroom or bath. Keep the look consistent by staying in the Deltana Morant family and ordering the privacy function in the same finish for those doors. If you are open to another brand for the whole house, Baldwin's Estate 5103 lever comes in passage, privacy, and left and right half dummy on the 5048 rose, so every door in a run matches.

In most cases yes. It is a tubular lockset with an adjustable 2-3/8 or 2-3/4 inch backset, so it drops into a standard residential bore at either backset on doors 1-3/8 to 2 inches thick. What you should check is the cross bore diameter and the latch face on your existing prep, since the door has to already be bored for a tubular set rather than a mortise lock.

For a straight residential hall and closet passage lever, the Kwikset 200BRNL Breton is a Grade 3 passage set covering 1-3/8 to 1-3/4 inch doors, and the Callan Asheville is another Grade 3 passage lever. Note the Kwikset tops out at 1-3/4 inches, so if your slab is thicker than that, the Morant's 2 inch range is the one that fits.

The Morant 6413 is non-keyed passage with no code entry at all, so it will not do that job. Mechanical pushbutton leversets cover it: the Lockey 2835 fits doors 1-3/16 to 2 inches and has passage function, and the Lockey 1150 heavy duty keypad set fits 1-1/8 to 2 inches with an adjustable backset. No wiring needed on either.

The Morant 6413 is a residential tubular passage lever. A step up without going to Grade 1 is the Falcon B101, a Grade 2 medium duty cylindrical passage lever with a non-handed design, or the Accentra 5301LN Augusta, a Grade 2 passage/closet cylindrical lever in the 5300 Series. Accentra also builds the 4601LN passage lever in the 4600 Series with the Augusta trim design at Grade 2. All three are passage function like the 6413, so the latch behavior on the door does not change.

The Morant 6413 is non-keyed passage, so it offers no access control at all. If the opening needs a code, the Lockey 1150 is a heavy duty mechanical keypad lever set with double combination in passage function for doors 1-1/8 to 2 inches, and the Lockey 2835 is a mechanical pushbutton keyless lever lock with passage function and ADA compliance for doors 1-3/16 to 2 inches, with a 2835DC double combination version. The Delaney LP250 is an electronic keypad leverlock at Grade 2. These mount differently than a plain tubular passage lever, so confirm the prep before swapping.

The Morant 6413 passage lever comes in PVD polished brass, brushed nickel, antique nickel, polished chrome, brushed chrome, and antique brass, which is a wide finish range for matching existing trim. On the decorative side, the Baldwin Estate 5103 passage lever pairs with the 5048 rose, and Bravura offers the Miramar passage leverset with round trim at Grade 2 in a US4 satin brass finish. Bravura Tampa uses square trim rather than round if the rest of the house runs to squared rosettes.

No. The Morant 6413 is a residential non-keyed passage lever, so it cannot secure a room. For a classroom, Dexter C1000 offers a Grade 1 classroom clutching keyed lever and a Grade 1 classroom security version, both for doors 1-3/8 to 1-3/4 inches, and Cal-Royal AG03 is a classroom lever in the AG Series with a 6-pin Schlage C keyway keyed different on a 2-3/4 inch backset. For an institutional or utility opening, Dexter C1000 asylum function covers doors 1-3/8 to 2 inches and Arrow MK33-BD-CS is a heavy duty asylum lock with a ball knob and Schlage C keyway.

The Morant 6413 is passage only and has no deadbolt or cylinder. The Callan Bennett is a Grade 3 entrance leverset supplied as a deadbolt combo, and the Callan Artino is a Grade 3 entrance leverset on its own. Master Lock's BC Series RL01 is a Grade 3 return style keyed entry lever, and Cal-Royal AUS00 is a Grade 3 entrance/office lever with a solid brass forged body for doors 1-3/8 to 1-3/4 inches.

No. The Morant 6413 is a complete tubular passage lockset with its own latch and adjustable 2-3/8 or 2-3/4 inch backset, bored into the door. Exit device trim is a lever that drives a panic device, not a standalone lock: the Corbin Russwin 585F715 is a Grade 1 lock lever for the ED8000 pushpad exit device in the CL3300 cylindrical lock series, for doors 1-3/4 to 2 inches, and the Imperial USA ED-EL500HD is a heavy duty escutcheon lever trim in entry function from the ED-500 Series. Both require the exit device they were built for.

Six: PVD Polished Brass, Antique Brass, Polished Chrome, Brushed Chrome, Brushed Nickel, and Antique Nickel. If you are matching existing hardware in a house, the PVD polished brass is the one to pick where you want a brass tone that holds up better than plain lacquered brass, and the two nickels cover the common satin-look interiors.

Steel and zinc construction. That is normal residential-duty material and it suits a house or a single-family rental hallway. On a high-traffic opening, a leasing office, a school, or a multifamily corridor, go to a heavy duty commercial passage lock instead, like the Falcon T101 or the BEST 9K series, which are built for that cycle count.