Deltana 6414D Morant Lever Dummy

It is a dummy lever, so there is no latch and no moving mechanism. The Morant 6414D mounts to the face of the door and the lever is fixed in place, giving you something to pull on. Use it on closet doors, false or inactive leaves of a pair, and doors that are held shut by a ball catch or roller catch. If you need the door to stay closed on its own, you need a passage set instead, not this.

No handing to specify. The Morant 6414D is universal, so the same part serves a left or right hand door. That is a difference worth noting against something like the Baldwin Estate 5103 half dummy, which is ordered as a specific left hand or right hand lever.

No backset prep needed. Because the Morant 6414D has no latch, it screws to the face of the door rather than through a cross bore into an edge bore. That makes it a straightforward install on a slab that was never drilled, and it is why backset does not come into the ordering decision the way it would on a keyed or passage lockset.

The Deltana 6414D Morant is a residential-rated non-keyed dummy leverset. If the opening needs a commercial dummy instead, the BEST 9K Series 1DT is a Grade 1 heavy duty single dummy trim cylindrical lever, and the Accentra 455LN Augusta is a Grade 1 heavy duty single dummy cylindrical lever lock in the 5400 Series. Both are dummy function like the 6414D, so the lever still does not retract a latch - they simply carry an ANSI/BHMA Grade 1 rating for higher-traffic commercial use.

The Deltana 6414D Morant is dummy function, meaning the lever is fixed trim with no latch behind it. For a door that has to latch and open, use a passage leverset: the Bravura Atlanta with round trim is a Grade 2 passage leverset, the Callan Asheville is a Grade 3 passage leverset, and the Hager 2510 is a Grade 2 passage cylindrical lever for doors 1-3/8 inch to 2 inch thick, matching the 6414D door thickness range.

Only if the door has a latch bore and strike. The Deltana 6414D Morant is dummy function - surface trim with no latch - so it is typically mounted on a door held by a ball catch or roller catch. A passage set such as the Falcon B101 Grade 2 cylindrical passage lever or the Accentra 5301LN Augusta Grade 2 passage/closet lever includes a retracting latch and needs the corresponding latch prep and strike in the frame. Swapping a dummy for a passage set is not a straight trim change.

One 6414D is a single dummy, so it covers one face of one door. For a pair of doors, or for a door you want a lever on both sides of, order two. If you would rather buy the pair together in one part number, the Emtek Classic Cortina dummy and the Emtek Arts and Crafts dummy are both sold as pairs.

Seven finishes: PVD Polished Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, and Antique Brass. If you are outfitting a unit or a floor, pick one finish and use the Morant dummy on the closet and inactive doors so the lever shape and finish read the same as the working doors.

The Morant 6414D is the dummy version of Deltana's Morant lever line, and Deltana offers the Morant in other functions so the design carries across the openings. If you would rather buy a single brand for both, the Callan Bentley is available as a Grade 2 dummy lever, and Bravura offers passage leversets in the Atlanta, Orlando, Tampa and Miramar designs for the doors that need to latch.

Neither. It is non-keyed with no cylinder and no thumbturn, because a dummy lever does not operate anything. For a bath or bedroom door that needs a privacy turn, a set such as the Kwikset 300BRNL Breton privacy lever or the Hager 2540 with the Withnell lever is what you want instead.

The Deltana 6414D Morant is a non-keyed dummy, so it offers no locking at all. For a bed or bath opening, the Baldwin Estate 5103 privacy lever with 5048 rose and the Kwikset 300BRNL Breton privacy lever set are both privacy function; the Kwikset is Grade 3 and fits doors 1-3/8 to 1-3/4 inch. The Hager 2540 with Withnell lever is another cylindrical option covering 1-3/8 to 2 inch doors.

The Deltana 6414D Morant is catalogued as a single dummy model in seven finishes. Where a two-sided application needs both faces trimmed, Emtek supplies dummy levers explicitly as pairs - the Arts and Crafts lever dummy pair and the Classic Brass Cortina lever dummy pair are both sold that way. Baldwin handles it differently again: the Estate 5103 half dummy is sold handed, as a left hand version and a right hand version, while the 6414D is universal handing.

The Deltana 6414D Morant covers 1-3/8 inch to 2 inch door thickness. If you are working a thicker or heavier commercial leaf, the Falcon K101 Grade 1 passage lock covers 1-3/8 inch to 2-1/4 inch and is fire rated, and the Corbin Russwin CL3110 Grade 1 vandal resistant passage lever covers 1-3/4 inch to 2 inch and is also fire rated. Those are passage function with a working latch, not dummy trim.

No. The Deltana 6414D Morant is a residential dummy lever in steel and zinc with no latch and no locking. Institutional openings generally call for Grade 1 cylindrical locks in the required function - the Dexter C1000 Grade 1 classroom lever, the Dexter C1000 Grade 1 classroom security lever, or the Dexter C1000 Grade 1 asylum lock for 1-3/8 inch to 2 inch doors. For storeroom corridors, the Cal-Royal AG05 is a Grade 2 storeroom lever with a deadlocking latchbolt.

Steel and zinc construction with a plated finish. It is a residential grade lever, not a forged brass commercial one, so treat it as interior trim on apartments and homes rather than hardware for a high traffic corridor.

The Deltana 6414D Morant is non-keyed dummy trim only. To finish a room where some doors lock, pair it with keyed sets from the same residential tier: the Callan Artino is a Grade 3 entrance leverset, the Callan Bennett is a Grade 3 entrance leverset with a deadbolt combo, and the Kwikset 200BRNL Breton is a Grade 3 passage lever for 1-3/8 to 1-3/4 inch doors. Trim style will not visually match the Morant, so confirm the lever profile if a uniform look matters.