Deltana BBS2001 Toilet Paper Holder, Single Post, BBS Series

Projection is 2-3/8 inches, on a 2 inch base. That matters in a tight water closet or an ADA-clearance stall where anything on the side wall eats into the space beside the fixture. The single post design means the roll loads onto one arm off that base rather than spanning between two posts, so you only need clearance on one side of the mounting point.

A single post holder like the BBS2001 mounts on one base and the roll slides on and off the open arm, so changing a roll is one-handed and there is no spring rod to lose. A bar style, such as the Emtek Modern Brass Paper Holder, spans between two mount points and holds the roll on a bar between them. Bar styles need two solid anchor points and more flat wall; a single post needs only one. On a narrow return wall beside a toilet, or between a vanity and a partition, the single post usually wins on space.

The Deltana BBS2001 is a single-post design, so the roll slides onto the post with no tube. If the job calls for a holder with a roller, the Orca Hardware 2752 in the 27-Cypress Series and the Orca Hardware 4852 Blakely in the 48-Blakely Series are both supplied with a plastic tube. In multi-family and hospitality units where tenants replace rolls constantly, that is the difference between a spring tube that can walk off and a fixed post that cannot.

The Deltana BBS2001 is a single-post toilet paper holder in solid brass with a 2 inch base and 2-3/8 inch projection, so the roll loads onto one open post. If you want the roll carried on a bar between two mounts instead, Emtek makes bar-style paper holders in several series: the Modern Brass Bath Hardware holder, the Traditional Bath Hardware holder, and the Transitional Bath Hardware holder. The choice is styling family and mounting footprint, not roll capacity - all of them hold a standard residential roll.

The Deltana BBS2001 is offered in polished nickel, brushed nickel and polished chrome, so it will not land on a bronze suite. For a bronze bath, the Emtek Sandcast Bronze Paper Holder in the Sandcast Bronze Bath Hardware series is a bar-style holder built for that finish family. Match the paper holder to the towel bars and ring you are already installing so the whole room reads as one set.

No - treat them as different rough-ins. The Deltana BBS2001 is a single-post holder with one 2 inch base, so it lands on a single mounting point. The Emtek bar-style holders, including the Modern Brass and Transitional Bath Hardware versions, carry the roll on a bar between two mounts and need a wider hole pattern. If you are swapping a BBS2001 for a bar style, plan on patching and re-anchoring rather than reusing the existing anchor.

The BBS2001 is solid brass, not plated zinc or a hollow tube, and it is rated by Deltana for commercial use. In a hotel, office, or multi-family common restroom, the failure point on a cheap holder is the post snapping or the base pulling loose when someone leans on it. Solid brass through the post and base holds up to that better than pot metal, and brass takes a repairable finish rather than a coating that flakes.

Three finishes: Polished Nickel, Brushed Nickel, and Polished Chrome. All three are the modern bright/satin metals, so if the building is standardized on chrome or nickel faucets and towel bars, the BBS2001 drops into that scheme. If the property is on oil-rubbed bronze or an aged brass, this is the wrong series for the match and you would look at a bronze-finish holder such as the Emtek Sandcast Bronze Paper Holder instead.

The Deltana BBS2001 is a solid brass single-post holder from the BBS Series, offered in polished nickel, brushed nickel and polished chrome. Orca Hardware's euro-style holders - the 3655 Swirl in the 36-Swirl Series and the 5255 Ripple in the 52-Ripple Series - are open euro designs with a decorative series treatment rather than the plain modern post. If you are matching an existing bath suite, pick by which series the rest of the accessories come from; the roll itself hangs the same way.

The Deltana BBS2001 is a solid brass holder rated for commercial use, with a 2 inch base and 2-3/8 inch projection - a compact footprint that suits tight partition walls and a single post with no tube to be pulled off. Orca Hardware's plastic-tube models, the 2752 Cypress and the 4852 Blakely, carry a replaceable tube, which is a serviceable part in a high-traffic restroom. Decide on whether you would rather have no consumable part at all or a tube you can swap.

The Deltana BBS2001 gives you one model number across the whole property in three finishes - polished nickel, brushed nickel and polished chrome - and it belongs to the BBS Series, so towel bars and rings from the same series carry the same modern brass styling. If your units are split by style tier, Emtek runs the same bar-style holder across separate families - Modern Brass, Traditional, and Transitional Bath Hardware - which lets you keep one manufacturer while varying the look by building.

The BBS Series is a modern collection, so the BBS2001 reads clean and squared rather than ornate. In a restoration or a traditional-detail property it will look out of place next to turned or scrolled hardware. For those rooms the Emtek Traditional Brass Paper Holder or the Transitional Brass Paper Holder are the styled alternatives, and Orca Hardware's 27-Cypress Series 2752 is another patterned option.