Deltana CHAL10 Contemporary Knob, Chalice, 1" Diameter

Projection on the CHAL10 chalice knob is 7/8 inch, with a 1 inch diameter head. That is a small footprint, so it clears in tight galley kitchens and in closet or laundry runs where a deeper knob catches sleeves and hips. If you are matching an existing run of knobs, measure the old one from the face of the door to the top of the knob and compare against the 7/8 inch figure.

No. The CHAL10 is a knob, single screw mounting, so it lands on one hole. A pull spans two holes at a fixed center to center spacing. Swapping a pull for this knob leaves the second hole open and you would need to plug and refinish the door face, or move to a pull with matching centers. If the existing hardware is a pull, a knob is not a drop in.

Both land at 1 inch, but the grip shape is different. The CHAL10 is a round chalice profile on a single screw. The Schaub 10040 Cafe Modern Oval and the 10030 Cafe Modern Oval Slot are both 1 inch knobs published with a 7/8 inch center to center, which means they are drilled and mounted as two hole knobs rather than a single post. If your doors already have a single centered hole, the round chalice drops straight in and the oval pair does not.

The Deltana CHAL10 is described as a contemporary chalice knob suited to a modern interior, so it reads wrong on a period cabinet run. For a craftsman or mission elevation, the Orca Hardware CK-18032 is a mission round cabinet knob from the 18-Mission Collection. For a deco kitchen, the Emtek Art Deco Cabinet Knob in the Schaub collection carries that styling, and the Emtek Astoria Glass Cabinet Knob puts a glass knob on the door instead of metal. All are cabinet knobs mounting the same way; the difference is the styling on the face.

The Deltana CHAL10 is a 1 inch diameter solid brass cabinet knob. The nearest match by size in another brand is the Schaub 10040, a 1 inch Cafe Modern oval cabinet knob, and the Schaub 10030, the 1 inch Cafe Modern oval slot version of the same knob. Both are 1 inch knobs like the CHAL10, so they hold the same visual footprint on a drawer front; the Schaub pair carries an oval Cafe Modern shape rather than the CHAL10 chalice profile, and the 10030 adds a slot detail the 10040 does not have. For a run of cabinets where the knob diameter was set on the drawing, all three land at the same 1 inch.

The Deltana CHAL10 is a 1 inch diameter knob, which is a small ergonomic profile better suited to standard drawer and door fronts. For a bigger grip, the Schaub 131 is a 1-1/2 inch round Artifex cabinet knob - a half inch more diameter to wrap a hand around. Going the other direction, the Schaub 1200 Modo knob is 16 mm, smaller than the CHAL10. Diameter is the variable to set first when a tall pantry or appliance panel needs a knob a full hand can pull.

Careful here - the Schaub 10030 and 10040 are both listed with 7/8 inch center to center, which means they are two-hole knobs. The Deltana CHAL10 is a 1 inch knob with a 7/8 inch projection and no center to center dimension of its own. If the doors are drilled for a single knob hole, a knob quoted with a center to center spacing is not a drop-in for it, and the fronts would need a second bore. Match on boring before matching on diameter.

Solid brass throughout, not a plated zinc or steel core. That matters on cabinetry that gets wiped down constantly, kitchens, baths, and rental turnovers, because a plated pot metal knob wears through at the fingertip contact point while a solid brass body under a finish does not expose a different colored substrate.

Nine finishes: PVD Polished Brass, Brushed Brass, Antique Brass, Polished Nickel, Brushed Nickel, Polished Chrome, Brushed Chrome, Oil Rubbed Bronze, and Paint Black. If you are standardizing a whole unit or a spec package, that spread covers both warm and cool trim schemes from one model number, so the knob profile stays identical across a kitchen, a vanity, and a butler's pantry even when the finish changes room to room.

The CHAL10 tops out at 1 inch. If you want more to grab, the Schaub 131 Artifex is a 1-1/2 inch round cabinet knob, a noticeably larger head for the same round shape. Going the other direction, the Schaub 1200 Modo is a 16 mm knob, smaller than the chalice, for slim European style fronts.

No. The CHAL10 is cabinet hardware, a knob that mounts to a cabinet door or drawer front with a screw from the back. It has no latch, no spindle, and no door bore prep. For a passage or entry opening you need a door knob set with a latch and a 2-3/8 or 2-3/4 inch backset, which is a different product entirely.

The Deltana CHAL10 is solid brass with a chalice profile. If the material is the requirement and the shape is not, the Delaney Solid Brass Cabinet Knob is also a solid brass cabinet knob and is the direct material-for-material alternative. Both are brass knobs for the same cabinet application, so a specification calling for solid brass hardware is satisfied either way, and the choice comes down to profile.

The Deltana CHAL10 is offered in nine finishes, including PVD Polished Brass, Antique Brass, Brushed Brass, Polished Nickel, Brushed Nickel, Polished Chrome, Brushed Chrome, Oil Rubbed Bronze, and Paint Black, which covers most of what a kitchen or bath package calls for. If the specified finish sits outside that, the Emtek 8665 Select cabinet knob in the Emtek SELECT series and the Emtek Allerton cabinet knob are the alternate knob families to price a finish against. All are cabinet knobs for the same door and drawer application.

The Deltana CHAL10 is a residential-rated cabinet knob in solid brass. On multi-family unit interiors and residential casework it is in its lane. Where a job wants a different knob family to standardize on, the Orca Hardware CK-19032 Whistler cabinet knob and the CK-18032 Mission round knob are both cabinet knobs that can be run across a package the same way. Confirm the application rating against the facility before standardizing.

Priced and sold each, one knob per unit. Count your doors and drawers separately when you order, since a base cabinet with a door and a drawer above it needs two, and order a couple of spares for the punch list.