Deltana GB24 Stainless Steel G...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$91.70
$68.78
Deltana Deltana GB24 Stainless Steel Grab Bar, 24", Concealed Screws DEL-GB24

Deltana GB24 Stainless Steel Grab Bar, 24", Concealed Screws

(No reviews yet) Write a Review

Model: GB24U32D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$91.70
$68.78
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

24" Grab Bar, Stainless Steel, Concealed Screw

Deltana Stainless Steel Grab Bars are available in various Lengths to match different Commercial and Residential applications. Bar Diameter equals 1-1/2" Diameter. Wall Mounts are Concealed Screw design.

  • Finish: US32D (Brushed Stainless Steel)
  • U/M (Unit of Measure): each - (Price displayed is per unit)
  • Length: 24"
  • Material: Stainless Steel
  • Bar Width: 1-1/2"
  • Projection: 3-1/2"
  • Inside Projects: 2"
  • Special Features: Concealed Screw Installation
  • Certifications: ADA Compliant
  • Base Size: 3-1/8"

Manufacturer Resources:

Spec Sheet

Manufacturer Resources

Product Specs

Subcategory:
Grab Bars
Product Group:
Washroom/Bath Accessories
Product Type:
Grab Bars
Product Subgroup:
Grab Bars and Hand Grips
Commercial/Residential:
Commercial
Series:
S.S. Grab Bars
MAP Policy:
Yes
Product Model:
GB24
Product Size:
24"
Product Material:
Stainless Steel
Product Category:
Bathroom Accessories
Product Substrate:
Stainless Steel
Department:
Door Hardware

Deltana GB24U32D – Frequently Asked Questions

1) Is the Deltana GB24 grab bar ADA compliant?
Yes. The GB24 is listed as ADA compliant. It uses the 1-1/2 inch bar diameter that ADA calls for on grab bars, and the wall clearance works out to 2 inches inside the bar (3-1/2 inch total projection off the wall), which is the 1-1/2 inch minimum ADA wants between bar and wall or better. For a compliant install you still have to set mounting height and position per the code for the fixture it serves.
2) Do I need blocking in the wall behind this grab bar?
Plan on it. The GB24 mounts with concealed screws through a 3-1/8 inch base at each end, and a grab bar has to transfer load into solid backing, so set wood or steel blocking in the stud cavity, or use a fastener rated for the wall type, before the tile goes on. The bar ships as a bar and flanges; the anchors appropriate to your wall construction are the installer's call.
3) Are the mounting screws on this Deltana grab bar visible after installation?
No. The GB24 uses a concealed screw wall mount, so the fasteners sit behind a cover flange and nothing shows on the finished bar. The mounting base is 3-1/8 inches, which is the footprint you need clear on the wall at each end.
4) What is the actual wall-to-wall length of the Deltana GB24 grab bar?
The GB24 is the 24 inch length in Deltana's stainless grab bar range. That is the nominal bar length used to spec it; each end flange has a 3-1/8 inch base, so allow for those pads when laying out the mounting points against tile joints or a blocking layout.
5) Will this grab bar hold up in a commercial restroom, or is it a residential-grade bar?
It is rated commercial. The GB24 is solid stainless steel through the bar and mounting substrate, finished in US32D brushed stainless, so it suits public restrooms, healthcare, hospitality and multi-family common areas as well as private baths.
6) Can I standardize on Deltana grab bars if some openings need a longer bar than 24 inches?
Yes. Deltana's stainless grab bar series runs in several lengths for different commercial and residential locations, all sharing the 1-1/2 inch bar diameter and concealed screw mount, so a facility can mix lengths (for example a shorter bar beside a lavatory and a longer one at a tub or water closet) and keep one look and one install method throughout.
7) How far off the wall does the Deltana GB24 stand?
Total projection is 3-1/2 inches, with 2 inches of open space between the back of the bar and the wall face. That 2 inch gap is what lets a hand wrap the bar fully, and it matters if you are fitting the bar behind a door swing, next to a shower valve, or into a narrow water closet compartment.
8) What finish does the Deltana GB24 come in, and will it match other brushed stainless washroom accessories?
One finish only: US32D, brushed stainless steel. That is the standard satin stainless number used across commercial washroom hardware, so it reads the same as other US32D dispensers, hooks and bars on the same wall.
How fast can I get the Deltana GB24U32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Deltana GB24U32D come with a warranty?
Absolutely. The Deltana GB24U32D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Deltana GB24U32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Deltana GB24U32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!