Deltana LTED80LST Lever Trim for Exit Device 80 Storeroom Function

The LTED80LST is cut for Schlage C keyway, so it drops into an existing Schlage C system without a separate cylinder change. That matters if you are standardizing a building on one key system: the trim keys alike with the rest of your C-keyway openings. If your facility runs a different keyway, this trim is not the one to order.

Storeroom function means the lever is always fixed on the outside. It never retracts the latch, and the key alone lets someone in. The door locks behind whoever leaves, and exiting is always free through the push bar. That is what you want on a storeroom, mechanical room, or any door that should stay locked from the outside at all times. If you need the lever to unlock and stay unlocked after a key turn, storeroom is the wrong function and you want a classroom or office trim instead.

Trim only. The LTED80LST is the outside lever assembly that mounts to an exit device, not the device itself. You still need the exit device on the push side of the door. Order it alongside the device, or as a replacement when the existing trim is damaged or the function needs to change.

The LTED80LST is a lever trim built for storeroom function, where the lever is always locked from the outside and a key retracts the latch. When the opening needs classroom function instead, the Arrow SRX87 is a Sierra lever trim with rose for S1150/S1250/ED910/PEC910 Series exit devices in classroom function, and the Detex 08BN is a classroom S-lever exit device trim with a mortise cylinder for the Value Series. Both put a lever on the pull side like the Deltana does, but classroom function keys to lock and unlock the outside lever rather than holding it permanently locked.

Swap the credential rather than the device. The Deltana LTED80LST works on a Schlage C key. For code entry, the Dormakaba E-Plex E5010 is an electronic push button exit device lever trim with key override, Grade 1, fitting doors 1-3/8 inch to 2-1/4 inch thick, and the BEST EXZ is an EZ Series electronic keypad exit device trim with key override function. For a mechanical pushbutton with no electronics or batteries, the Lockey 285P is a keyless mechanical panic trim with a lever handle for doors 1 3/16 inch to 2 inch thick. All three still present a lever on the outside the way the Deltana does.

Use a blank trim rather than a lever. The Deltana LTED80LST puts an operable lever with a Schlage C keyway on the outside face. Where the outside must be fully secured with nothing to turn, the Sargent 802 is a blank plate exit device trim with GTB design in the PE80 Series, and the Von Duprin 379L-BE is a blank escutcheon trim for 55 Series rim exit devices. Corbin Russwin also builds a dummy lever trim for ED7000 Series devices, which keeps the lever look but does not retract the latch.

The Deltana LTED80LST is a steel and zinc lever trim in storeroom function. Where a specification calls for Grade 1 trim, the Corbin Russwin K157ET is a Grade 1 heavy duty key only trim with rose for ED2200 and ED2400 exit devices in classroom function, and the Von Duprin 379L-BE is a Grade 1 heavy duty blank escutcheon for 55 Series rim devices. The Corbin Russwin dummy lever trim for ED7000 Series devices is also Grade 1 heavy duty. Each of these is tied to its own manufacturer's device series, so the device on the door decides which one applies.

Built for commercial use, with a steel substrate and a steel/zinc construction. That is the material a lever trim needs on a door that gets pulled on all day in an office, school, or multi-family corridor, rather than a cast residential lever.

A lever gives controlled entry: turn the key, use the lever, and you are in. A pull does not. If the outside of that door only ever needs to be pulled open when the device is dogged, or the door is exit-only, a fixed pull is simpler and there is nothing to break. The Sargent 862 offset pull and the Detex A Series straight pull with blank escutcheon cover that case, and the Sargent 802 blank plate covers a door where no outside operation is wanted at all. Choose the LTED80LST lever when someone with a key has to get in through that door.

Yes. The Deltana LTED80LST is a keyed lever trim in Schlage C keyway, which means a cylinder, a keying decision, and a lever to maintain. If the outside face only needs something to grab, the Sargent 862 is an offset pull handle for exit devices in the P800 Series, and the Detex A/AN Series straight pull trim pairs a straight pull with a blank escutcheon for Value Series exit devices. Neither takes a cylinder, so the door is exit-only from the inside with no key control on the outside.

No. The Detex 03WS is a trim plate with a cylinder hole for 10, 20, 21, and 27 Series devices, so it accepts a cylinder but gives the user no lever to turn. The Deltana LTED80LST is a lever trim in storeroom function, meaning the key both releases the lever and lets the lever retract the latch for entry. If the outside face needs to open the door with a key and a handle, the 03WS plate alone will not do it.

Two items in the same aisle are not trim substitutions. The Detex 90 Series keyed removable mullion is the vertical post between a pair of doors that lets rim exit devices latch on a double opening, not a piece of outside trim. The ACSI ED4200-W036 is a Corbin Russwin ED4000 Series rim exit device with 24 volt AC/DC electric latch retraction, Grade 1 wide stile, which is the exit device itself rather than the trim mounted on the pull side. The Deltana LTED80LST is only the outside lever trim and needs a device already on the door.

Both keep the door locked to the outside and rely on a key. The Deltana LTED80LST is a lever trim in storeroom function, so the user turns a lever after keying. The Sargent 814 PSB is a heavy duty nightlatch pull exit device trim in the 80 Series, where the key retracts the latch and the user pulls on a fixed pull instead of a lever. A lever is the choice where the opening needs to be operable without tight grasping or twisting of the wrist; a nightlatch pull has fewer moving parts on the outside face.

Use a passage-style panic trim. The Deltana LTED80LST holds the outside lever locked until it is keyed, which is storeroom function. The Lockey 115P is a heavy duty keyless passage lever panic trim with a 1150 lock body for doors 1 3/16 inch to 2 inch thick, giving a lever anyone can operate from the outside with no key and no code. The Corbin Russwin dummy lever trim for ED7000 Series devices is a further step down, a fixed lever that does not operate the latch at all.

Check the trim's door material compatibility before ordering. The Sargent 802 blank plate trim with GTB design is not wood door compatible, so it should not be specified for a wood opening. The Deltana LTED80LST is a steel lever trim for commercial openings, and thickness and material compatibility follow the exit device it is mounted to. Where door thickness is the constraint, the Dormakaba E-Plex E5010 covers 1-3/8 inch to 2-1/4 inch and the Arrow SRX87 is built for 1-3/4 inch doors.

Brushed Chrome, and that is the only finish it is built in. If the rest of the openings in the building are on a satin chrome or brushed nickel family, it will read alongside them; if you are matching bright brass or oil-rubbed bronze, this trim will not blend and you should be looking at a different trim line.

Sold each. One LTED80LST covers one leaf, so a pair of doors with an exit device on each leaf takes two.