Deltana MP40 Decorative Cabinet Pull 4", Manhattan, Solid Brass

Deltana classes the MP40 Manhattan as residential. For apartment kitchens, condo millwork, model units and light hospitality casework that is the right call. For a high traffic institutional casework package, where pulls get yanked hundreds of times a day, look at a steel bar pull instead, such as the Orca Hardware CK-12001 T-Pull Bar in steel with a satin nickel finish.

The closest cross-brand match is the Omnia 1968/102, a modern cabinet pull in forged solid brass on 4 inch center to center spacing. Same drilling, same base metal, different profile. The Trimco 562 Series drawer pull is also offered in a 4 inch center to center option, along with 3-1/2 inch and 96mm, which makes it the one to reach for if part of the job is drilled metric.

The Omnia 1969 and Omnia 1971 modern cabinet pulls are both forged solid brass with a 1-3/16 inch projection, and the Omnia 1970 is forged solid brass with a 1-1/4 inch projection. The Deltana MP40 Manhattan projects 1-1/2 inches from the face. In a narrow galley or a passage where a cabinet door swings into circulation, the shorter-projection Omnia pulls sit closer to the face.

The Omnia 1968/102 Modern Cabinet Pull is the nearest equivalent. It is a forged solid brass modern cabinet pull with 4 inch center-to-center spacing, matching the MP40's 4 inch center to center and solid brass construction. The MP40 measures 4-3/4 inches overall with a 1-1/2 inch projection, so confirm drawer face clearance if you are mixing the two on the same run of cabinetry.

The Deltana MP40 Manhattan is designated residential. For commercial casework, the Trimco 562 Series drawer pull is offered in 3-1/2 inch, 4 inch and 96mm center-to-center options, so the 4 inch option drills to the same hole spacing as the MP40 and lets you reuse existing boring on a retrofit. The Trimco 553 Series is a 3 inch center-to-center drawer pull, which requires new boring if you are coming off a 4 inch pattern.

Ten finishes: PVD Polished Brass, Unlacquered Brass, Brushed Brass, Antique Brass, Polished Nickel, Brushed Nickel, Polished Chrome, Brushed Chrome, Oil Rubbed Bronze and Paint Black. Two of those behave very differently over time. Unlacquered Brass is bare and will patina with handling, which some specs want and most property managers do not. PVD Polished Brass is the one to order if you need the brass look to stay put across a fleet of units.

Projection is 1-1/2 inches on the Manhattan MP40. That is a deep grip, good for drawers you pull with a full hand or with gloves on, but worth checking against anything that swings past the cabinet face, a neighboring appliance door or a tight galley run where two opposing doors meet.

Solid brass, all the way through, not plated zinc or tube stock. Both the material and the substrate are brass, so the finish sits on brass rather than on a pot metal casting. That matters where hands are on it all day, a rental kitchen turnover or a hotel millwork package, since a worn plating on a die cast pull shows base metal and a brass one does not.

Not really a substitute. The Schaub 10011 is a 4 inch center to center edge pull, so the drilling matches the MP40, but an edge pull mounts at the edge of a door or drawer and sits nearly flush rather than projecting off the face. If you want the flat, snag-free look, that is the swap. If you want something to grab, the MP40's 1-1/2 inch projection is the point of it.

Step up to an appliance pull. The Schaub 79-8 Steamworks is an 8 inch cabinet pull with an appliance pull function, sized and built for the weight and grip length of an integrated appliance panel. The Deltana MP40 Manhattan is a 4 inch decorative cabinet pull at 4-3/4 inches overall, which is scaled for doors and drawers rather than appliance panels.

No. The Orca CK-15030 and CK-16030 Bachelor Collection items are round cabinet knobs at 1-1/4 inch diameter, and the Orca CK-17025 Blackcomb is a square cabinet knob at 25mm diameter. All three are single-point knobs, so they mount on one hole. The Deltana MP40 Manhattan is a two-hole pull on 4 inch center-to-center spacing. Swapping a knob in for the MP40 leaves an unused second bore in the drawer face.

They are not interchangeable. The Schaub 10011 Sabre is a 4 inch center-to-center edge pull, a different part function than the MP40, which is a surface-mounted decorative cabinet pull. An edge pull is designed to work at the edge or face-recessed condition of a door or drawer rather than as a bail standing off the face. The center-to-center number matches but the application does not, so specify by function first and spacing second. The Schaub 10010 is the 3 inch edge pull and the 10012 the 5 inch.

The Orca Hardware CK-12001 T-Pull Bar is a 2 inch bar width steel pull in satin nickel, a plain bar profile in steel rather than the Deltana MP40's solid brass Manhattan decorative design. For a fleet of units where you want one repeatable pull across every kitchen, the steel bar is the simpler specification. The MP40 is the choice when the unit finish package calls for brass in one of ten finishes including oil rubbed bronze, polished nickel and unlacquered brass.

The MP40 is sold each, one pull per unit, so count your doors and drawers and order that quantity. The only choice you make on the order form is finish, ten of them, since the pull comes in one size at 4 inch center to center. Mounting screws are what fasten a pull through the door, so match your screw length to your door or drawer front thickness when you set the job up.

Emtek's Schaub Collection covers several design directions in the cabinet knob and pull function: the Art Deco Cabinet Pull for a period profile, the Alexander Cabinet Pull, the Bar Cabinet Pull for a plain cylindrical bar, and the Emtek 8405 in the SELECT series. All carry a cabinet knob/pull function, the same role the Deltana MP40 Manhattan fills. The MP40's own look is a modern decorative design in solid brass.

The MP40 is the 4 inch Manhattan pull in solid brass. When a job needs several spacings within one visual family, Omnia's cabinet pull program runs across the 1968, 1969, 1970 and 1971 series in forged solid brass, and Trimco's 562 Series carries 3-1/2 inch, 4 inch and 96mm center-to-center options within a single series. That matters when tall pantry doors and shallow drawers on the same elevation need different spacings but the same look.