Deltana POM40 Contemporary Cabinet Pull 4", Pommel, Solid Brass

Yes. The POM40 Pommel pull is drilled on 4 inch center to center, so it drops onto the same two holes as any other 4 inch ctc pull with no new boring. Overall length is 6 inches, so it will overhang each hole by an inch.

The Omnia 1968/102 Modern Cabinet Pull is a forged solid brass pull with 4 inch center-to-center spacing, matching the POM40's 4 inch center-to-center and solid brass construction. The POM40 is the Pommel contemporary design with a 6 inch overall length and 1-5/16 inch projection; the Omnia comes from the 1968 Cabinet Pulls Series. Both mount on the same two-hole 4 inch drilling, so either drops into existing 4 inch centers.

The POM40 projects 1-5/16 inch off the face. The Omnia 1969 and Omnia 1971 modern cabinet pulls are forged solid brass with a 1-3/16 inch projection, and the Omnia 1970 is forged solid brass at 1-1/4 inch projection, so all three sit closer to the door face than the Pommel bar. All are modern-profile solid brass pulls like the POM40.

No. The Schaub 10011 is an edge pull with 4 inch center-to-center spacing in solid brass, and while that spacing matches the POM40's 4 inch centers, an edge pull mounts along the edge of the door or drawer front rather than standing off the face. The POM40 is a face-mounted contemporary bar pull with 1-5/16 inch projection whose posts screw into the pull bar. Schaub also lists the 10010 edge pull at 3 inch and the 10012 at 5 inch center-to-center if edge mounting is what the job needs.

Projection is 1-5/16 inches. That matters where drawers sit next to a wall return, an appliance panel, or in a tight galley run, so check your clearance at the swing of the adjacent door before you commit to the whole kitchen.

Ten: PVD Polished Brass, Unlacquered Brass, Brushed Brass, Antique Brass, Oil Rubbed Bronze, Polished Nickel, Brushed Nickel, Paint Black, Polished Chrome, and Brushed Chrome. If you want a living finish that darkens over time, Unlacquered Brass is the one. PVD Polished Brass is the opposite, a plated finish meant to hold its color.

Solid brass, both material and substrate. Finishes are applied over that brass body, so an edge nick shows brass rather than a zinc casting.

Deltana classes the POM40 as residential. For kitchens, baths, vanities and built-ins it is the right call; for a high-traffic institutional casework program you would normally specify a commercial drawer pull instead, such as the Trimco 553 or 562 Series.

The posts screw into the pull bar, so the machine screws come through the back of the drawer front into the posts. That two-piece construction is what lets you swap in longer screws for a thicker or applied front instead of being stuck with one fixed stud length.

Two close options: the Omnia 1968/102, a forged solid brass modern pull also on 4 inch center to center, and the Schaub 10011 Sabre edge pull in solid brass at 4 inch ctc, though that one is an edge pull and mounts on the face edge rather than standing off the front. If you want a steel bar pull rather than brass, the Orca CK-12001 T-pull is the different-material route.

The POM40 is a 4 inch center-to-center cabinet pull with a 6 inch overall length, sized for cabinet doors and drawers. For an appliance front, the Schaub 79-8 Steamworks 8 inch cabinet pull is catalogued as an appliance pull, giving the longer grip length that appliance doors normally call for.

The POM40 is a residential-duty contemporary solid brass pull offered in ten finishes including PVD Polished Brass, Oil Rubbed Bronze, Polished Nickel, Brushed Nickel, Polished Chrome, Brushed Chrome, Unlacquered Brass, Brushed Brass, Antique Brass, and Paint Black. Comparable contemporary cabinet pull families include the Emtek Bar Cabinet Pull and the Emtek SELECT 8405 from the Schaub Collection, and the Omnia 1968, 1969, 1970, and 1971 Cabinet Pulls Series in forged solid brass. If you need a steel bar instead of brass, the Orca Hardware CK-12001 T-Pull Bar is a 2 inch bar width steel pull in satin nickel.

Not on the same holes. The Orca Hardware CK-15030 and CK-16030 Bachelor Collection pieces are cabinet knobs at 1-1/4 inch diameter, and the CK-17025 Blackcomb is a square cabinet knob at 25mm diameter - all single-screw knobs. The POM40 is a two-post pull on 4 inch center-to-center with a 6 inch overall length, so swapping to a knob leaves one of the two existing holes exposed.

Each. The unit of measure is one pull, so order a count that matches your door and drawer schedule rather than assuming pairs or boxes.

The POM40 is a pull only, 4 inch ctc, not a knob. For a mixed program where drawers get pulls and uppers get knobs, round knob options we carry include the Orca Bachelor Collection CK-15030 at 1-1/4 inch diameter and the ring version CK-16030. Bear in mind those are a different brand, so finishes will not match Deltana exactly.

The POM40 Pommel is a clean contemporary bar aimed at modern interiors. For a more ornamented look in the same cabinet pull role, Emtek offers the Art Deco Cabinet Pull and the Alexander Cabinet Pull, both from the Schaub Collection, each catalogued as a cabinet knob/pull like the POM40.