Deltana R2000 Toilet Paper Holder, Double Post, R-Series

Projection is 3-1/2 inches on the R2000 double post holder. That is the number to check against a vanity edge, a swing door, or a grab bar run in a tight water closet, since anything mounted on a side wall in a narrow stall eats into clear floor space. The double post design means the roll sits between two arms rather than on a single pivot bar.

Solid brass, both as the stated material and as the substrate under the finish. That matters in a hotel or multi-family bathroom, where a plated pot-metal holder pits and flakes once cleaners get at it. Solid brass also means the mounting posts take a repeated yank without deforming.

The R2000 is part of Deltana's R-Series bath collection, a traditional line that includes other bathroom accessories in the same solid brass and the same finish range. If the towel bars and rings on the other openings are already R-Series, the R2000 matches by finish name. If they are a different Deltana series or another brand, match on finish name and style rather than assuming; polished chrome from two makers is usually close, but oil rubbed bronze varies a lot between manufacturers.

The Emtek Traditional Brass Paper Holder is the closest traditional-style peer. It is a bar style holder from Emtek's Traditional Bath Hardware series, so the paper rides on a bar rather than between two posts, while the Deltana R2000 is a double post holder in the R-Series, made of solid brass with a 3-1/2 inch projection. If you are matching an existing traditional bath suite, the deciding factor is which brand's other accessories are already on the wall, since each series is finished and styled to its own family.

Go to the Orca Hardware 2752 or the Orca Hardware 4852 Blakely, both of which are toilet paper holders supplied with a plastic tube. The Deltana R2000 is a double post design, so the roll sits on posts with no spring tube to replace. In high-turnover washrooms a tube holder is chosen when housekeeping wants the roll captive on a spindle; a double post is chosen when they want to drop the roll on without handling a tube.

The Emtek Sandcast Bronze Paper Holder is a bar style holder from Emtek's Sandcast Bronze Bath Hardware series, cast bronze rather than brass. The Deltana R2000 is solid brass and is offered in Oil Rubbed Bronze among its finishes, which gives a dark bronze appearance on a brass substrate. If the rest of the package is sandcast bronze, the Emtek matches the casting texture; if the package is plated or painted brass hardware, the R2000 in Oil Rubbed Bronze keeps the substrate consistent.

Deltana classifies the R2000 as commercial. Combined with the solid brass construction, that is the reason it turns up in hotel, office and multi-family washrooms rather than only in homes. The traditional R-Series styling is what makes it read as residential.

A double post holder like the Deltana R2000 carries the roll on a spindle between two arms, so the roll is captured on both ends and cannot be lifted off without pulling the spindle. That suits public and shared washrooms where rolls walk. A euro or open-arm style, such as the Orca Hardware 3655 Swirl Euro or 5255 Ripple Euro, lets the roll slide on and off one open end, which is faster to reload but leaves the roll unsecured. Pick the double post for traffic, the euro for convenience in a private bath.

Emtek's Traditional Brass Paper Holder in the Traditional Bath Hardware series is the closest traditional-styled brass equivalent. Emtek also runs the same bar-style holder in Modern Brass, Transitional Brass and Sandcast Bronze, so if the rest of the bathroom trim is already Emtek you can stay within one collection. The difference in form is real: those are bar-style holders, where the Deltana R2000 is a double post.

The Orca Hardware 3655 Swirl and the Orca Hardware 5255 Ripple are Euro style holders, an open design where the roll loads from the end without a full second post or captive tube. The Deltana R2000 is a double post holder built in solid brass with a 3-1/2 inch projection, so the roll is bracketed on both sides. Euro holders reload faster; a double post keeps the roll retained from both ends, which matters where rolls get knocked off.

For a modern flat-line suite the Emtek Modern Brass Paper Holder, from Emtek's Modern Brass Bath Hardware series, is the design-matched choice, and the Emtek Transitional Brass Paper Holder covers the middle ground between modern and traditional profiles. The Deltana R2000 belongs to the R-Series, a traditional collection of solid brass bath accessories, so its post profile reads traditional rather than flat-line. Match the paper holder to the towel bar and ring already selected so the whole washroom reads as one family.

No. The Emtek Traditional Brass and Emtek Transitional Brass paper holders are bar style units, a different mounting geometry from the R2000 double post design, so the wall post spacing and anchor points are not interchangeable and the existing holes will not line up. Plan on patching and re-drilling, or on a repaint, if you swap between the two formats on an occupied wall. Staying within the R-Series keeps the traditional solid brass look consistent across the room.

The Deltana R2000 is solid brass and comes in Polished Chrome, Polished Nickel, Brushed Nickel and Antique Nickel, so one model covers several unit finish schemes with a common part number and a common 3-1/2 inch projection for the mounting detail. Among the peers, the Orca Hardware 2752 Cypress and Orca Hardware 4852 Blakely are tube-style holders if maintenance prefers a spindle, and the Emtek series holders are bar style. Standardizing on one format matters more than the brand, because it keeps your turn crews carrying one anchor kit.

Each. The R2000 unit of measure is a single holder, so a 60-bathroom job is a quantity of 60. Nothing on the order is bundled by pair or by set, and finish is chosen per unit, so a mixed-finish building has to be ordered as separate lines by finish.

Orca Hardware's 2752 Cypress and 4852 Blakely holders both use a plastic tube for the roll rather than a solid metal spindle, which is the usual trade for a lower-cost fitting. The Deltana R2000 is solid brass throughout. For a high-turnover rental where fittings get replaced anyway, the plastic-tube holders do the job; for a building you maintain long term, brass is what survives the cleaning chemicals.