Deltana SBP80 Modern Square Bar Pull 8", Heavy-Duty, Solid Brass

The SBP80 is an 8 inch center-to-center pull, so it will not land on a 4 inch drilling. The Omnia 1968/102 Modern Cabinet Pull is forged solid brass with 4 inch center-to-center spacing and keeps the same modern look. If the drawer bank is drilled at 3-1/2 inch, 4 inch or 96mm, the Trimco 562 Series drawer pulls cover those three spacings, and the Trimco 553 Series is a 3 inch center-to-center drawer pull.

It stands 1-3/16 inches off the face of the door or drawer. That is the number to check against anything in the swing path, a wall return, an adjacent appliance, or a door that opens back against a corner. It also sets the grip room behind the bar, which is enough to get a full hand around it.

Solid brass, both the substrate and the material on record. That matters in kitchens and baths where a plated steel or zinc pull will eventually pit or flake at the fingers; brass takes the finish directly and holds up to daily grabbing with wet hands.

Six: Oil Rubbed Bronze, Polished Nickel, Brushed Nickel, Paint Black, Polished Chrome, and Brushed Brass. If you are matching an existing run of cabinetry, order one of the finish you think you have and compare it in the room light before committing to the rest of the job, since Brushed Nickel and Brushed Brass read very differently under warm versus cool lighting.

The SBP80 is built residential and heavy-duty in solid brass at 8 inch centers, which is the size range people use on appliance panels and tall pantry doors. If you specifically want a pull sold as an appliance pull at the same 8 inch length, the Schaub 79-8 Steamworks is catalogued that way. Check that the panel is bored at 8 inches on center either way.

It is classified residential. For apartment turns, single-family remodels, and spec homes it is the right call. If you are specifying casework pulls for a school, clinic, or hotel corridor where the hardware gets abused daily, look at a commercially classified pull instead.

Both are solid brass modern pulls. The SBP80 is a square bar profile at 8 inch centers with a 1-3/16 inch projection. Omnia's 1969 and 1971 are forged solid brass with the same 1-3/16 inch projection, and the 1970 stands a bit further off at 1-1/4 inches; Omnia's 1968/102 is a shorter 4 inch center-to-center pull for drawers and small doors. Pick on hole spacing first, then profile.

Both are bar-style cabinet pulls. The Deltana SBP80 is a square bar profile in solid brass, 8 inch center-to-center with a 1-3/16 inch projection and an 8-7/16 inch overall length, offered in Oil Rubbed Bronze, Polished Nickel, Brushed Nickel, Paint Black, Polished Chrome and Brushed Brass. The Emtek Bar Cabinet Pull is Emtek's Bar series within the Schaub collection, so the specification and finish naming follow Emtek's line. Emtek also fields the SELECT 8405, Alexander and Art Deco cabinet pulls in that same collection if you want a different profile than a plain bar.

They share the 8 inch size but not the intended use. The Schaub 79-8 Steamworks is an 8 inch cabinet pull built as an appliance pull, meaning it is meant for refrigerator and dishwasher panels. The Deltana SBP80 is a cabinet pull with an 8 inch center-to-center, solid brass, in a modern square bar profile for residential cabinetry. If you are outfitting a run of cabinet doors and drawers in one look, the SBP80 keeps a single square bar profile; if the appliance panels are the target, the Steamworks is the one drawn for that job.

The Deltana SBP80 projects 1-3/16 inch off the face. The Omnia 1970 Modern Cabinet Pull is forged solid brass with a 1-1/4 inch projection, so it gives a marginally deeper grip while staying in the same modern solid brass family. The Omnia 1969 and 1971 both sit at 1-3/16 inch projection, matching the SBP80 if you want to keep the standoff consistent across a mixed order.

Each. The unit of measure is one pull, and the price shown is per unit, so count your doors and drawers and order that quantity. On a kitchen it is worth adding a spare or two for the finish run.

That is exactly the pairing it is drawn for. The square bar profile is a clean contemporary line meant for modern slab and flat-panel fronts. On raised-panel or heavily profiled traditional doors it will read as a mismatch; a knob or a curved pull suits those better.