Deltana SBP35 Modern Square Bar Pull 3-1/2", Heavy-Duty, Solid Brass

No. The SBP35 drills at 3-7/16 inch center to center, not 3-1/2. The 3-1/2 inch figure is the nominal size designation, and the overall length is 3-13/16 inches. If your doors are already bored at a true 3-1/2 inch (or 96mm) spacing, the Trimco 562 Series drawer pulls are offered in 3-1/2 inch, 4 inch and 96mm center-to-center options and will land on existing holes.

The SBP35 drills at 3-7/16 inch center to center, so on drawers already bored wider you want a longer pull. The Omnia 1968/102 modern cabinet pull is forged solid brass with 4 inch center-to-center spacing, and the Schaub 10011 Sabre edge pull is solid brass at 4 inch center to center. For existing 3 inch bores instead, the Trimco 553 series drawer pull is 3 inch ctc.

The Omnia 1969 modern cabinet pull is the nearest match. Like the Deltana SBP35, it is a modern cabinet pull in solid brass, and Omnia lists the 1969 with a 1-3/16 inch projection, the same projection the SBP35 carries. Omnia forges its brass, and the 1971 is another modern pull in the same 1-3/16 inch projection if you want a second profile in that family.

Projection is 1-3/16 inches, which is enough clearance for a gloved hand and keeps knuckles off the door face on inset or full-overlay fronts. If you want a slightly deeper grip, the Omnia 1970 modern cabinet pull projects 1-1/4 inches.

Solid brass, both the substrate and the finished material. Finishes such as Polished Chrome, Brushed Nickel and Paint Black are applied over that brass body, so there is no zinc casting underneath.

Six: Oil Rubbed Bronze, Polished Nickel, Brushed Nickel, Paint Black, Polished Chrome and Brushed Brass. That spread covers the usual kitchen and bath specs, and the matte Paint Black reads flat rather than glossy if you are matching black faucets or appliance trim.

Yes. The Trimco 562 series drawer pull is offered in 3-1/2 inch, 4 inch, and 96mm center-to-center options, so the 3-1/2 inch version lines up with the Deltana SBP35's 3-1/2 inch size. The Deltana is solid brass and sold per each in six finishes including oil rubbed bronze and polished chrome; the Trimco 562 spans several spacings within one series if you need to mix sizes on a run of cabinets.

Several nearby items are a different kind of hardware. The Schaub 10010, 10011, and 10012 are edge pulls, mounted at a door or drawer edge rather than face-bored like the SBP35. The Orca CK-15030 and CK-16030 Bachelor Collection items are 1-1/4 inch round cabinet knobs, and the CK-17025 Blackcomb is a 25mm square knob, all single-hole knobs rather than two-hole bar pulls. The Schaub 79-8 is an 8 inch appliance pull, sized for refrigerator and panel doors. And the SDC SP50 50mm spindle is a door control part, not cabinet hardware at all.

Yes. The Deltana SBP35 projects 1-3/16 inch from the face, while Omnia lists the 1970 modern cabinet pull at 1-1/4 inch projection. If clearance to an adjacent wall, appliance, or a walkway is tight, the SBP35 sits slightly closer to the door. Omnia's 1969 and 1971 are also 1-3/16 inch if you prefer forged brass at that same projection.

Yes. It is a two-post bar pull with a 3-7/16 inch hole spacing and 3-13/16 inch overall length, so it mounts horizontally on drawer fronts and vertically on door stiles alike. On wider drawer banks many spec a longer pull for balance, but nothing about this one restricts it to doors.

A bar pull like the SBP35 gives a two-point grip and 1-3/16 inch of finger clearance, which suits tall doors and heavy drawers. Knobs are the simpler single-hole option and read more traditional; the Orca Blackcomb square cabinet knob at 25mm keeps the same squared modern geometry if you want knobs on the uppers and bar pulls on the drawers.

The Deltana SBP35 is a modern square bar pull with a clean contemporary profile. For a more ornamental face, Emtek's Schaub Collection offers the Art Deco cabinet pull and the Alexander cabinet pull, both catalogued as cabinet knob/pull hardware in their own series. The Emtek Bar cabinet pull stays closer to the SBP35's straight bar shape, and the Emtek 8405 belongs to the Emtek SELECT series.