Deltana SSPBB1810 18" Contemporary Pulls, Back-to-Back

Yes. The SSPBB1810 is built for doors 1-3/8 to 1-7/8 inches thick, so a standard 1-3/4 inch commercial door sits right in the middle of that range. Outside that window, the through-bolt hardware in the kit won't make up the difference.

Both. The Contemporary Stainless Steel pull kits ship with the installation hardware required for glass and wood doors, so a glass front installer and a carpenter are ordering the same part. Just confirm your glass thickness or door falls in the 1-3/8 to 1-7/8 inch range the mounting hardware covers.

Back-to-back means two 18 inch pulls mounted opposite each other through the door on shared fasteners, so you get a pull on the push side and the pull side of the same opening. That is the configuration for a door with no latch or lockset, like a glass entry or a slab that swings both ways. If you only need a handle on one face, back-to-back is the wrong option.

The Deltana SSPBB1810 is an 18 inch stainless steel contemporary pull in a back-to-back configuration, 1 inch thick, for doors 1-3/8 inch to 1-7/8 inch thick. If you want a heavy duty round bar profile instead of the contemporary flat contemporary section, the Ives 8103HD is a heavy duty straight door pull with a 1 inch round bar and through bolt mounting. Both land at the same 1 inch grip section; the 8103HD carries a heavy duty rating and a round cross section, and the Deltana is stainless steel supplied with the installation hardware for glass and wood doors.

The Deltana SSPBB1810 is a straight 18 inch contemporary pull mounted back-to-back. For an offset profile, the Ives 8169 is a C style offset solid door pull, 1 inch diameter, with heavy duty mounting, and the ABH AB3310 is an offset flat end door pull in a surface mount commercial configuration. The offsets change the hand clearance and the mounting footprint on the stile, so confirm your stile width before swapping from the straight Deltana section.

The Ives 8145EZHD is a 45 degree offset door pull with heavy duty mounting hardware, described as ADA compliant in the EZ series. That is the one to specify when the accessibility requirement is written on the drawing. The Deltana SSPBB1810 is an 18 inch stainless steel contemporary pull for commercial use in a back-to-back configuration, and it is chosen on appearance and length rather than on an accessibility callout.

The pull bar is 1 inch thick and runs 18 inches overall. That 1 inch figure is the bar section, so size your standoff expectation around a full-hand grip on a 1 inch stainless bar rather than a thin rail. For a heavier 1 inch round bar with a stated 1-1/2 inch clearance, the Ives 8102HD lists 3/4 inch round bar with 1-1/2 inch clearance and the Ives 8103HD is a 1 inch round through-bolted pull.

Three: paint black, polished stainless, and brushed stainless. Brushed stainless is the one that blends with most commercial storefront and lever hardware already on a building; polished reads brighter next to bright chrome trim; paint black is the match for black anodized or black-painted door frames. All three are the same stainless steel pull underneath.

Commercial. The SSPBB1810 is a solid stainless steel pull classified for commercial use, which is what you want on an entry that sees constant traffic. Stainless also holds up better than plated brass on an exterior opening where the finish takes weather and hand oils all day.

The Deltana SSPBB1810 is a straight contemporary bar. If your opening needs the grip standing off from the door face, look at the ABH AB3310 offset flat end pull, the ABH AB3330 offset round end pull with custom length options, or the Ives 8169 C style offset pull in 1 inch diameter. The Ives 8145EZHD is a 45 degree offset pull described as ADA compliant.

The Deltana Contemporary stainless pull is made in three lengths, and SSPBB1810 is the 18 inch one. If 18 inches is too long for your stile or your glass panel, order a different length in the same series rather than a different family, so the finish and the 1 inch bar profile stay consistent across the building.

No. The kit includes the installation hardware required for glass and wood doors, so the through fasteners come with the pair. You are ordering one unit and the price shown is per unit, with the back-to-back pair being what that unit covers.

No. The Trimco 1001-1 is a heavy duty push plate measuring 3 inches by 12 inches and the Trimco 1041 is a half-round push plate 8 inches by 16 inches; a push plate is a flat protective plate you press, with no grip. The Deltana SSPBB1810 is an 18 inch pull with a 1 inch grip section, furnished back-to-back so the same handle serves both faces of the door. If you need a pull on one face and a push on the other, the Trimco 1070 series classic push/pull plates at 3-1/2 inches by 15 inches pair the two functions on one plate set.

The ABH AB3330 series is an offset round end pull offered with custom length options, so it is the one to quote when the opening needs a length that is not a stock size. The Deltana SSPBB1810 covers the 18 inch size in the contemporary stainless steel line, and the series runs in three lengths with kits that include the installation hardware required for glass and wood doors.

All three are straight commercial pulls. The ABH AB3300 is a straight flat end pull handle with a 1.00 inch diameter, and the ABH AB7200 is a solid stainless steel flat end pull with a 7/8 inch diameter and through-bolt mounting. The Deltana SSPBB1810 is stainless steel, 18 inches long with a 1 inch thick section, supplied back-to-back for doors 1-3/8 inch to 1-7/8 inch thick, and offered in paint black, polished stainless, and brushed stainless. The AB3300 matches the Deltana at 1 inch across the grip; the AB7200 is the slimmer 7/8 inch bar.

No, they do different jobs. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inches high, in stainless steel construction - it is a short pull built around a cylinder for a night latch application. The Deltana SSPBB1810 is an 18 inch stainless steel pull with no cylinder provision, mounted back-to-back through the door for doors 1-3/8 inch to 1-7/8 inch thick. If the door needs a keyed cylinder at the pull, the PUL-175 is the correct part; if it needs a full-height grip on both faces, the SSPBB1810 is.

There is no handing on a straight back-to-back pull. The SSPBB1810 is a symmetrical 18 inch bar mounted through the door, so the same part goes on either leaf of a pair and on either hand. Handing does come up on decorative pulls, the Emtek Art Nouveau 8 inch pull is ordered by handing, so do not assume every pull is neutral.

The Deltana SSPBB1810 works as a standard because it is one stainless part in three finishes covering both glass and wood doors across a 1-3/8 to 1-7/8 inch thickness range, which is most of the doors in a typical commercial building. Pick one finish, usually brushed stainless, and the same SKU covers your storefront glass and your interior wood slabs. Where an opening needs a shorter grip, stay in the Contemporary series, which is made in three lengths.