Deltana OHP620 Off-Set Handle Pull, Back-to-Back Set

No. The OHP620 back-to-back pull set is built for doors 1-1/8 to 1-3/8 inches thick, so a standard 1-3/4 inch commercial door is outside its range. For a 1-3/4 inch door look at a through-bolted commercial pull instead, such as the Ives 8103HD 1 inch round straight pull or the ABH AB3310 offset flat end surface mount pull.

Yes, it ships as a back-to-back set with both sides complete, so one order covers the push and pull side of a single door. Compare that with single-sided pulls like the Sure-Loc Round Long Door Pull or the Sure-Loc Knurled Long Door Pull, single-sided, where you would need two to dress both faces.

Mounting centers are 4-3/16 inches center-to-center. Because it is a back-to-back set, the two faces share the same through-holes, so drill straight through the door on that 4-3/16 inch spacing and both pulls land aligned.

The Ives 8145EZHD is a 45 degree offset door pull described as ADA compliant, supplied with heavy duty mounting hardware. The Deltana OHP620 is a solid brass off-set handle pull with 4-3/16 inch center-to-center spacing, furnished as a back-to-back set with both sides complete. Where a barrier-free specification has to be documented, the 8145EZHD is the one carrying that claim.

The OHP620 comes with both sides complete as a back-to-back set, so paying for it on a push/pull opening wastes half the hardware. Single-sided options include the Sure-Loc Round Long Door Pull with concealed or thru-bolt mounting, the Sure-Loc Knurled Long Door Pull single-sided with thru-bolt mounting, and the Sure-Loc Square Long Door Pull. For a push plate on the reverse face, the Trimco 1001-1 heavy duty push plate is 3 inch by 12 inch, and the Trimco 1070 series combines classic push and pull plates at 3-1/2 inch by 15 inch.

Nine finishes: PVD Polished Brass, Polished Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, and Paint Black. If you are matching hardware across a run of doors, the PVD Polished Brass option holds its color better than standard lacquered polished brass in high-touch entries.

Solid brass throughout, both body and substrate. That matters on an exterior or high-traffic door where a plated steel pull can rust once the finish wears at the grip point.

An off-set pull angles the grip away from the door face, which gives more knuckle clearance and a more natural wrist position when you haul a heavy door open. A straight pull, like the ABH AB3300 1 inch diameter flat end pull, sits parallel to the face and reads cleaner but gives less hand room. If ADA-style offset geometry on a heavier commercial leaf is the goal, the Ives 8145EZHD 45 degree offset pull is the heavy duty route.

The Ives 8169 is a C style offset solid door pull, 1 inch diameter, with heavy duty mounting. The Deltana OHP620 is solid brass, off-set, and 4-3/16 inch center-to-center, sold as a back-to-back set so both faces of the door are dressed from one order. The Ives is a heavy duty bar pull in round stock; the Deltana is a brass handle pull offered in nine finishes including oil rubbed bronze, polished chrome, and antique brass.

The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height in stainless steel, built to mount over a rim cylinder rather than serve as a general door pull. The Trimco 1035 Ultimate Restroom Pull is a heavy duty restroom-specific pull, and the Trimco 1041 is an 8 inch by 16 inch half-round push plate, not a pull at all. The Deltana OHP620 is an off-set brass handle pull supplied back-to-back for 1-1/8 inch to 1-3/8 inch doors.

For a straight bar in place of the off-set OHP620, the ABH AB3300 is a straight flat end pull handle with a 1.00 inch diameter, and the ABH AB7200 is solid stainless steel with a 7/8 inch diameter and through-bolt mounting. On the Ives side, the 8102HD is a heavy duty straight pull with 3/4 inch round bar and 1-1/2 inch clearance, and the 8103HD is a heavy duty straight pull in 1 inch round with through bolt mounting.

Deltana classes the OHP620 as commercial. In practice it suits boutique retail, hospitality, and multi-family entries where a solid brass finish matters as much as the duty level. For a back-of-house or institutional opening taking constant abuse, a heavy duty pull such as the Ives 8102HD or Ives 8169 C style offset pull is the tougher pick.

Priced and sold each, and one each is the complete back-to-back set covering both door faces. So a six-door job is six units, not twelve.