Deltana SWP4762 Switch Plate, Single Standard/Double Outlet, Solid Brass

The SWP4762 is a 4-1/2 x 4-1/2 inch plate, which is oversized compared to a standard two-gang cover. That extra material is what lets it hide chipped drywall, old paint lines, or a rough cutout around an existing box without patching. Configuration is one standard toggle switch opening plus one duplex outlet opening.

That is exactly the combination it is cut for: one opening for a standard toggle switch and one for a duplex (double) outlet, on a two-gang footprint. If your box has two toggles, or two duplex receptacles, this is the wrong template and you need the matching two-switch or two-outlet plate from the same Deltana standard plate range.

Solid brass, not a plated stamping. Both the material and substrate on the SWP4762 are brass, so the finish sits on brass rather than on steel or zinc. Practical difference on a job: it will not rust-bleed at the screw holes in a humid corridor or bathroom, and the edges stay true when you snug the screws down on an out-of-square box.

Nine finishes: Polished Brass, PVD Polished Brass, Antique Brass, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, Oil Rubbed Bronze, and Paint Black. If you are matching lever sets or hinges already in the building, the PVD Polished Brass is the one to pick where the plate sits in sunlight or gets wiped down constantly, since PVD is a deposited coating rather than a lacquer.

Yes, and that is the usual reason a facility buys into the line. The Standard Switch Plates series runs a range of templates (single switch, multiple switches, single and double outlets, and combinations like this switch-plus-outlet SWP4762) in the same finish family, so a hotel or multi-family retrofit can spec one finish across every room and just change the template per box. Order the SWP4762 for the boxes carrying a toggle beside a receptacle.

Deltana lists the SWP4762 as commercial. For a property manager or facilities buyer that matters in corridors, lobbies, and hospitality guest rooms, where a thin stamped plate gets bent by cart traffic and vacuum cleaners. The solid brass body is what carries that duty.

Sold each, one plate per unit. On a multi-unit turn, count the boxes that actually carry a switch next to a receptacle and order that quantity, rather than ordering by room, since the other openings in the room take different templates.

No separate hardware order is needed for the device itself. A wall plate mounts on the machine screws that come with the switch and receptacle already in the box, so what you are buying here is the plate. Match the screw heads to the finish if the look matters, since the existing screws in an old box are usually ivory or brown plastic-headed.