Deltana UFB5000BP Round Universal Floor Door Bumper 2", Solid Brass, Blister Pack

The UFB5000BP stands 2 inches tall with a 1 inch bar width. That height is measured from the floor to the top of the bumper, so it catches a door leaf whose bottom edge clears the floor by less than 2 inches. If you have a thick threshold, a tall carpet pile, or a big undercut that puts the door's contact point higher, a gooseneck style stop that reaches up the face of the door, like the Orca 22HD Series goose neck, is the better call.

At 2 inches tall the UFB5000 may stand proud of a low door edge. Lower profile options we carry include the Emtek 2254 floor door bumper at 1-3/8 by 1-1/4 inches, the Emtek 2257 cylindrical floor bumper at 1-1/2 inches, and the Orca 23LP Series low rise dome floor stop.

The Deltana UFB5000BP is a solid brass floor bumper designated for commercial use. If you want an explicitly heavy-duty catalogued stop, the Ives FS13 and FS17 are heavy-duty brass floor dome stops, the FS13 with a replaceable rubber bumper, and the Ives FS18S/FS18L security floor stop is also heavy duty for openings where tampering is a concern.

The Deltana UFB5000BP is a floor door stop that limits swing; it does not latch the door open. For hold-open duty, the Orca Hardware TH-22HD goose neck floor stop is catalogued with a door holder function, the Ives FS40 / FS41 / FS42 / FS43 is an automatic floor stop and holder, and the SOSS MDH is a magnetic door holder and stop measuring 3-5/16 inches by 1-3/4 inches.

The UFB5000BP is a round universal floor bumper 2 inches high with a 1 inch bar width in solid brass. The closest cylindrical-style peers are the Emtek 2257, a 1-1/2 inch cylindrical floor bumper, and the Sure-Loc DS-FL2 cylindrical floor stop for residential doors. The Emtek 2254 floor door bumper is smaller at 1-3/8 inch by 1-1/4 inch, so it projects less from the floor than the 2 inch Deltana.

The Deltana UFB5000BP stands 2 inches high. For less projection, the Orca Hardware TH-23LP is a low-rise dome floor stop with a gray tip, and dome-style stops such as the Delaney 40260X dome stop, the Emtek 2251 half dome, and the Ives FS17 brass floor dome stop sit lower than a 2 inch cylinder.

Five: Polished Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, and Polished Chrome. Since the body is solid brass, the plated and living finishes all sit on the same casting, which makes it straightforward to match the stop to existing lever and hinge finishes on the same opening.

The UFB body is a round cylindrical bumper that mounts to the floor in the door's swing path rather than being tied to a particular door or frame prep, so it works on wood, hollow metal, or glass doors of any thickness. The only real constraint is the floor material it screws into and the 2 inch height clearing the bottom of the leaf.

A round bumper like the UFB5000 rises 2 inches off the floor and takes the strike on its cylindrical face, so it suits a door that needs to be stopped well short of the wall. A dome stop sits much lower and is meant to be hit by the very bottom edge of the leaf, close to the wall; the Delaney Dome Door Stop, Emtek 2251 half dome, and Ives FS17 brass floor dome stop are that style. Choose the taller cylinder when the contact point on your door is higher than a dome can reach.

They mount to the floor but work differently. The UFB5000BP is a round 2 inch bumper with a 1 inch bar width that the door face meets. Gooseneck types such as the Delaney 40118X gooseneck floor door stop, the Emtek 2253 goose style door stop, and the Orca TH-22HD goose neck stop with black tip use an arched arm reaching up to the door, and the TH-22HD is catalogued for 1-3/8 inch or 1-3/4 inch doors with a door holder function.

The Ives FS13 heavy-duty brass floor dome stop is catalogued with a replaceable rubber bumper, while the Ives FS17 is listed with a rubber bumper. The Deltana UFB5000BP is a solid brass round bumper supplied in a blister pack in five finishes, including oil rubbed bronze, brushed nickel, polished chrome, polished brass, and antique brass, so it is replaced as a unit to match surrounding trim.

UFB5000BP is the blister packed edition of the 2 inch universal floor bumper, so each piece comes carded for retail display or counter sale. Pricing and unit of measure are each, one bumper per unit, so a property manager ordering stops for twelve doors orders twelve.