Deltana UFBP5000 Round Universal Floor Door Bumper Pattern Cap 2-1/8", Solid Brass

At 2-1/8 inches in diameter the UFBP5000 round cap gives you a fair amount of coverage over an existing anchor location, so it often hides the scarring left by a smaller stop base. Measure the old footprint first: anything wider than 2-1/8 inches will still show. Smaller-diameter alternatives in the same family of parts run well under that, for example the Emtek 2257 cylindrical floor bumper at 1-1/2 inches and the Emtek 2254 at 1-3/8 inches.

No. A low-profile round floor bumper cap like the UFBP5000 sits at the floor and takes the door at its bottom edge, so it only works where the door reaches the stop close to the floor line and the swing is short. Where the door needs to be caught higher or held open, go to a gooseneck or holder type: the Orca Hardware 22HD Series goose neck floor stop with black tip functions as a door holder, and the SOSS MDH magnetic door holder and stop catches and holds the door open.

The Deltana UFBP5000 is a 2-1/8 inch round universal floor bumper pattern cap in solid brass, rated commercial. If you want a brass floor dome stop built for heavy traffic, the Ives FS17 is a heavy-duty brass floor dome stop with a rubber bumper, and the Ives FS13 is a heavy-duty brass floor dome stop whose rubber bumper is replaceable, so the strike surface can be renewed in place rather than swapping the whole stop.

The Deltana UFBP5000 is a floor bumper that stops the door only; it does not hold it. For hold-open, the Ives FS40 / FS41 / FS42 / FS43 is a heavy-duty automatic floor stop and holder, and the SOSS MDH is a heavy-duty magnetic door holder and stop measuring 3-5/16 inches by 1-3/4 inches. The Orca 22HD Series gooseneck is also listed with a door holder function.

Nine finishes: Polished Brass, Antique Brass, PVD Polished Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, and Paint Black. That spread lets you match most existing lever, hinge and kickplate finishes on a building rather than settling for a mismatched stop. PVD Polished Brass is the one to pick where the finish takes handling or moisture and you don't want it to tarnish.

Deltana classifies the UFBP5000 as commercial, and it is solid brass through rather than plated pot metal, which is what holds up in corridor and multi-family traffic. For openings that get kicked open hard or need the door held open, a heavy-duty stop like the Ives FS40/FS41/FS42/FS43 automatic floor stop and holder is the better call.

A low-profile bumper such as the 2-1/8 inch UFBP5000 cap sits close to the floor and is mostly a cushion and a finished face, which keeps a trip hazard down in a corridor. A dome stop stands taller and projects further to catch the door earlier in its swing, like the Orca 23LP Series dome floor stop or the Ives FS13 dome stop with a replaceable rubber bumper. Pick the dome where the door needs to stop short of a wall; pick the low round cap where clearance and appearance matter more.

The Deltana UFBP5000 cap measures 2-1/8 inches across. If that footprint is larger than the floor area allows, the Emtek 2254 floor door bumper measures 1-3/8 inches by 1-1/4 inches, and the Emtek 2257 is a 1-1/2 inch cylindrical floor bumper. The Orca 23LP Series is a low-rise dome floor stop with a gray tip if you want to keep the dome shape but sit closer to the floor.

The UFBP5000 is a solid brass bumper cap carried as a commercial item. For residential openings, the Sure-Loc DS-FL2 is a cylindrical floor stop listed for residential doors, the Sure-Loc DS-FL1 is a floor stop with a spring in modern door stop designs, and the Delaney Dome Door Stop and Emtek 2251 Half Dome Door Stop cover the dome shape.

You can. The UFBP Series universal floor bumpers come in a range of sizes and designs sharing the same finish palette, so a property manager can run one look across unit doors, corridors and common areas and only vary the size where the opening requires it. The UFBP5000 is the 2-1/8 inch round pattern cap within that series.

Individually. The unit of measure is each, so order one per opening (or two per opening if you are stopping a pair of doors).

No. The UFBP5000 is a floor-mounted bumper cap that arrests the door swing at floor level and comes in finishes including oil rubbed bronze, polished chrome and polished brass, so it matches surrounding trim. It does not reach up the door leaf the way the Emtek 2253 goose style stop does, and it does not latch the door open the way the SOSS MDH magnetic door holder and stop does. Match the function first, then the finish.