Deltana WP27 Pull, 6" Overall

The WP27 is a 6 inch pull measured overall, end to end, not center to center. That distinction matters when you're replacing an existing pull: the mounting hole spacing on a 6 inch overall pull is shorter than 6 inches, so don't order it expecting to land on 6 inch centers. If your drawer fronts are already drilled and you need a specific hole spacing, work from the center-to-center number, not the overall length. For a stated center-to-center pull, the Omnia 1968/102 is a forged solid brass pull with 4 inch center-to-center spacing.

The WP27 is a residential-grade pull. For cabinetry in apartments, condo units, model homes, or the millwork in a hospitality guest room it's the right class of hardware. For a high-traffic commercial application, a break room in an office building or casework in a school or clinic, look at a heavier institutional pull instead. The Orca Hardware CK-12001 T-pull bar is steel rather than brass with a 2 inch bar width, which is a different build for a harder-use opening.

No. At 6 inches overall the WP27 is a cabinet and drawer pull, not an appliance pull. Refrigerator and dishwasher panels need a longer, heavier pull that can take the pull force of a gasketed door. The Schaub 79-8 Steamworks is an 8 inch pull built as an appliance pull. Run the WP27 on the cabinetry and spec a true appliance pull on the panel-ready appliances.

Only if your current holes match the WP27's mounting spacing. The WP27 is a 6 inch overall pull, which puts its screw centers somewhere shorter than 6 inches, so it will not land on standard 3, 3-1/2, 4, or 96mm centers by default. If you're retrofitting drilled fronts, measure your existing hole spacing center to center first and match a pull specified that way: the Schaub Sabre edge pulls come in 3, 4, and 5 inch center-to-center, and the Trimco 553 is 3 inch and the 562 offers 3-1/2 inch, 4 inch, and 96mm. Redrilling a finished front is a repair job, so it's worth measuring before you order.

The Deltana WP27 is a 6 inch overall rounded traditional pull in solid brass. For forged solid brass from another manufacturer, Omnia's 1968 Cabinet Pulls Series includes the 1968/102 with 4 inch center-to-center spacing, and the 1969, 1970 and 1971 series pulls are also forged solid brass, with the 1970 at 1-1/4 inch projection and the 1969 and 1971 at 1-3/16 inch projection. Those Omnia pulls are modern in profile rather than rounded traditional, so match the styling to the door before ordering.

The WP27 is a 6 inch overall cabinet pull, which is short for an appliance door. The Schaub 79-8 Steamworks is an 8 inch cabinet pull carried as an appliance pull, and that is the part to specify when the door is an appliance front. Use the WP27 on standard cabinet doors and drawers.

The WP27 is a surface-mounted pull that stands off the face of the door. Where the door edge has to stay clear, Schaub's Sabre edge pulls mount at the edge instead: the 10010 at 3 inch center to center, the 10011 at 4 inch, and the 10012 at 5 inch. Those are edge pulls, a different mounting approach from the WP27, so the prep is not interchangeable.

Solid brass throughout, not a plated or brass-toned base metal. The finish is applied over solid brass, which is why the WP27 is offered in both living finishes like antique brass and antique nickel and in plated finishes like polished chrome. For a kitchen or bath where hands are on the hardware constantly, solid brass holds up where a thin plating over zinc wears through at the grip point.

Nine finishes: PVD Polished Brass, Polished Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, and Paint Black. If you're matching a whole kitchen or a run of units, the pairing worth knowing is PVD Polished Brass versus standard Polished Brass. PVD is a physical vapor deposition coating that resists tarnish and handles cleaning; standard polished brass is lacquered and will patina over time at high-touch points. For a rental or a multi-unit job where you don't control how it gets cleaned, take the PVD.

Style, mostly. The WP27 is a rounded traditional profile in solid brass, which suits raised-panel, shaker, and inset cabinetry and traditional or transitional interiors. If the job is flat-slab modern casework, a straight bar pull reads better: the Emtek Bar cabinet pull from the Schaub collection and the Omnia 1969, 1970, and 1971 modern pulls in forged solid brass are the modern-profile alternatives. Both families are cabinet pulls; you're choosing on the door style in front of you, not on function.

Yes - pulls on drawers and knobs on doors is a common split, and the WP27 is a 6 inch overall pull that works on either. On the knob side, Orca Hardware's Bachelor Collection CK-15030 is a round cabinet pull knob at 1-1/4 inch diameter, the CK-16030 is a round ring cabinet pull knob at the same 1-1/4 inch diameter, and the Blackcomb Collection CK-17025 is a square cabinet pull knob at 25mm diameter. Confirm the finish family matches across both parts, since the WP27 alone runs nine finishes including Polished Brass, Oil Rubbed Bronze, Brushed Nickel and Polished Chrome.

Yes. The WP27 is a cabinet pull, and at 6 inches overall it works on drawer fronts and on cabinet doors alike. On drawers, the common practice is to mount horizontally and centered; on doors, vertically on the stile opposite the hinge. One 6 inch length across the whole run keeps the look consistent, which is usually what you want on a kitchen rather than mixing pull sizes by opening.

Each. The WP27 is sold as a single pull, and the price shown is per unit, so count your openings and order that quantity. On a kitchen, count drawer fronts plus door fronts, and remember doors on a butt pair take two pulls. Order a couple of spares in the same finish while you're at it, because finish lots on living finishes like antique brass and oil rubbed bronze won't always match a reorder later.

Paint Black is the black option on the WP27. It's a painted black finish over the solid brass body rather than a plated one. If you're matching black faucets and lighting across a bath or kitchen, pull a sample before committing the whole run, since black finishes vary in sheen between manufacturers and a painted finish will not read identically to a powder-coated or PVD black on another fixture.

The WP27 mounts with standard cabinet pull machine screws driven from behind the door or drawer front. What matters on the job is screw length: standard cabinet fronts take one length, but a thicker front, an applied moulding, or a drawer box with a subfront needs longer screws than a typical pull ships with. If your fronts are thicker than standard 3/4 inch stock, pick up longer 8-32 machine screws so you're not stopped mid-install.

The WP27 reads as rounded traditional. For a more decorative profile, Emtek's Schaub Collection offers the Art Deco Cabinet Pull and the Alexander Cabinet Pull, both catalogued with a cabinet knob/pull function, while the Emtek Bar Cabinet Pull runs a straight bar profile and the Emtek 8405 belongs to the SELECT series. All four are alternatives to the rounded traditional shape rather than matches to it.