Deltana P311 Adjustable Pull 6-1/2"

That's what the P311 is built for. It's an adjustable pull, so the posts slide to line up with existing pre-drilled hole centers instead of forcing you to plug and re-bore. On a refit where the old pulls came off a hundred cabinet doors in a unit and the hole spacing isn't consistent from run to run, that adjustment is the whole reason to pick it. Overall length is 6-1/2 inches.

Solid brass, all the way through, not plated zinc or steel. That matters on a pull because it's the one piece of hardware in a kitchen or bath that gets grabbed with wet hands several times a day, and a solid brass body won't corrode out from under the finish the way a pot metal casting does. It's rated for commercial use.

Ten: PVD Polished Brass, Polished Brass, Brushed Brass, Antique Brass, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, Oil Rubbed Bronze, and Paint Black. If you're matching existing brass hardware that has to hold up in a high-traffic or coastal building, the PVD Polished Brass is the one to look at, since PVD is a vapor-deposited coating rather than a lacquer.

Cabinet scale. The P311 is a 6-1/2 inch adjustable pull for cabinet and drawer fronts, not a door pull for a storefront or entry leaf. If you need something a person hauls a full-weight door open with, you want a back-to-back or offset entry pull, not this.

Sold each. The price you see is per pull, so on a job where you need 47 of them you order 47, not four boxes of twelve with a partial left over.

The P311 is the 6-1/2 inch length in Deltana's adjustable pull line. Deltana runs the adjustable pulls as a series with the model number changing by length, so specify by model rather than by finish code when you're mixing sizes across a job. Order the finish as a separate selection, since all ten finishes are options on the pull itself.