You may also like
DEWALT Bantams 10-12 X 1
Features
- Manufactured by DEWALT
- Anchor body is resistant to corrosion from moisture
- Offered with and without screws (available in kits)
- Performs well in most base materials
Manufacturer Resources
Product Specs
- Country Of Origin:
- China
- Fastener Length:
- 1
- Individual Vs Set Syndigo :
- INDIVIDUAL
- Product Category:
- Anchors
- Product Diameter Us:
- 1 IN
- Product Finish:
- Blue
- Product Primary Material:
- Nylon
- Product Weight:
- 0.002 lbs
- Use With:
- Light Duty Anchoring
- Department:
- Electrical
DEWALT 07579-PWR – Frequently Asked Questions
1) What size screw does the DEWALT 07579-PWR Bantam anchor take?
The 07579-PWR Bantam is sized for #10-12 screws at 1 inch of anchor length. That screw range is what the Bantam designation covers, so a #10 or #12 sheet metal or wood screw up to about an inch of embedment is the right fastener to pair with it.
2) Do DEWALT Bantam anchors come with the screws included?
Not necessarily. Bantam anchors are offered both with and without screws, the screw-included version being sold as a kit. The 07579-PWR is an individual item, so plan on supplying #10-12 screws unless you are ordering a kit.
3) Can I use nylon Bantam anchors in a damp or outdoor location?
The anchor body is nylon and resists corrosion from moisture, so damp locations are not a problem for the anchor itself. The screw you drive into it is the limiting part, so use a plated or stainless screw outdoors. Keep in mind this is a light duty anchor, not a structural one.
4) What base materials will a DEWALT Bantam anchor hold in?
Bantams perform in most base materials, which in practice means drywall, plaster, block, brick and concrete for light loads. They are rated for light duty anchoring, so use them for things like conduit straps, device boxes, signage and trim, not for hanging heavy equipment or anything load bearing.
5) Is this the blue plastic anchor electricians use for conduit straps and boxes?
Yes, that is the one. The 07579-PWR is a blue nylon Bantam anchor in the 10-12 x 1 size, carried as electrical department stock, and it is the common choice for strapping conduit or mounting boxes to masonry and drywall at light loads.
6) What part number do I order for DEWALT 10-12 x 1 Bantam anchors?
Order DEWALT part 07579-PWR. That is the Bantam anchor in the 10-12 x 1 configuration, blue nylon, supplied as an individual anchor item rather than a set.
7) Are these DEWALT anchors made in the USA?
No. The 07579-PWR Bantam anchor is manufactured by DEWALT with a country of origin of China, which matters if you are working a job with domestic sourcing requirements.
How fast can I get the DEWALT 07579-PWR delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DEWALT 07579-PWR come with a warranty?
Absolutely. The DEWALT 07579-PWR is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DEWALT 07579-PWR?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the DEWALT 07579-PWR from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.