You may also like
DEWALT Double 1/4
Features
- Corrosion resistant body
- Manufactured by DEWALT
- Performs in base material of questionable strength
- Internally threaded anchor for easy removability and service work
Manufacturer Resources
Product Specs
- Connection Design:
- Concrete Only
- Country Of Origin:
- Vietnam
- Fastener Length:
- 1.375
- Individual Vs Set Syndigo :
- INDIVIDUAL
- Power Source:
- NON-ENERGY USING
- Product Diameter Us:
- 1/4 IN
- Product Finish:
- Zinc
- Product Primary Material:
- Alloy Steel
- Product Weight:
- 0.034 lbs
- Use With:
- Light Duty Anchoring
- Department:
- Electrical
DEWALT 09510-PWR – Frequently Asked Questions
1) Can the DEWALT 09510-PWR anchor be used in block or brick, or is it concrete only?
Concrete only. The 09510-PWR is specified for concrete base material, so block, hollow brick, and masonry veneer are outside what it is rated for. If your substrate is block or brick, pick an anchor listed for that material rather than forcing this one.
2) What size hardware does the DEWALT 09510-PWR internally threaded anchor accept?
It is a 1/4 inch anchor, so it takes 1/4 inch threaded hardware into the internal thread. Because the thread is internal rather than a fixed stud, you drive your own bolt or rod in and can back it out later for service without disturbing the anchor set in the concrete.
3) How deep does the 09510-PWR anchor set into the slab?
Fastener length is 1.375 inches, so you need at least that much sound concrete depth plus allowance for dust at the bottom of the hole. On thin toppings or slabs over metal deck, check you have the embedment before drilling.
4) Is this DEWALT anchor strong enough to hang conduit, strut, and junction boxes?
It is specified for light duty anchoring, which covers typical electrical work like conduit straps, small strut runs, box and fixture mounting. It is not a structural or seismic-rated anchor, so anything carrying significant load or life safety weight needs a heavy duty mechanical or adhesive anchor instead.
5) Will the 09510-PWR hold in old or crumbly concrete?
It is built for base material of questionable strength, which is why it gets used in older slabs and weathered concrete where a wedge anchor can spall the hole. The substrate still has to be concrete, and you still want the full embedment of clean hole.
6) Is the 09510-PWR anchor okay for a damp parking garage or exterior slab?
The body is alloy steel with a zinc finish and is described as corrosion resistant, which suits interior and moderately damp locations. Zinc plating is not stainless, so for direct exposure to standing water, coastal air, or de-icing chemicals a stainless anchor is the better call.
7) Does the DEWALT 09510-PWR come as a kit with bolts, or is it the anchor alone?
It is sold as an individual anchor, not a set, and no mating bolt or rod is included. Order your 1/4 inch bolts, machine screws, or threaded rod separately along with the correct carbide bit for the hole.
8) Can fixtures mounted with this anchor be removed later without damaging the concrete?
Yes, and that is the main reason it gets specified for maintenance work. The anchor stays set in the slab while the bolt threads in and out of the internal thread, so a fixture can be taken down and rehung repeatedly without drilling a new hole.
9) Does the 09510-PWR need power or batteries?
No. It is a non-energy using mechanical anchor weighing 0.034 lbs each. The only power involved is the rotary hammer or hammer drill you use to make the hole.
How fast can I get the DEWALT 09510-PWR delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DEWALT 09510-PWR come with a warranty?
Absolutely. The DEWALT 09510-PWR is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DEWALT 09510-PWR?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the DEWALT 09510-PWR from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.