You may also like
Klein Tools D2000-48-INS Diagonal Cutting Pliers, Insulated, Heavy-Duty, Angled Head, 8-Inch
Model: KLN-D2000-48-INS
Diagonal Cutting Pliers, Insulated, Heavy-Duty, Angled Head, 8-Inch
Warnings
Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
Wear approved eye protection...
Klein Tools
$163.61
$113.61
Klein Tools D2000-28 Diagonal Cutting Pliers, Heavy-Duty, High-Leverage, 8-Inch
Model: KLN-D2000-28
Diagonal Cutting Pliers, Heavy-Duty, High-Leverage, 8-Inch
Features
Plastic-dipped handles for comfort and ease of identification
Short jaws and beveled cutting edges permit close cutting of...
Klein Tools
$106.79
$56.79
Klein Tools J2000-28 Diagonal Cutting Pliers, Heavy-Duty, 8-Inch
Model: KLN-J2000-28
Diagonal Cutting Pliers, Heavy-Duty, 8-Inch
Warnings
Always wear approved eye protection.
NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical...
Klein Tools
$114.89
$64.89
Klein Tools D2000-8 Lineman's Pliers, Heavy-Duty Side Cutting, 8-Inch
Model: KLN-D2000-8
Lineman's Pliers, Heavy-Duty Side Cutting, 8-Inch
Warnings
Always wear approved eye protection.
NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against...
Klein Tools
$116.56
$66.56
Klein Tools D228-8-INS Diagonal Cutting Pliers, Insulated, High Leverage, 8-Inch
Model: KLN-D228-8-INS
Diagonal Cutting Pliers, Insulated, High Leverage, 8-Inch
Warnings
Wear approved eye protection.
Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an...
Klein Tools
$140.89
$90.89
Diagonal Cutting Pliers, Insulated, Heavy-Duty, 8-Inch
D2000-28-INS - spec sheet
Warnings
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Wear approved eye protection.
- Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
Features
- Flame Retardant and Impact Resistant Handle
- Heavy-duty, induction hardened cutting knives cut ACSR, screws, nails, and most hardened wire
- Hot-riveted joint for smooth action and no handle wobble
- High-leverage design for 36-percent greater cutting power than other plier designs
- Clearly marked with the official 1000-volt rating symbol
- Forged steel for maximum durability
- Flame retardant, impact-resistant, bright orange outer coating with two layers of insulation provide protection against electric shock
- Pliers grips made of durable molded insulation meet or exceed ASTM F1505-16(2021) and IEC 60900 -2018 standards for insulated tools
- Made in USA
- Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
D2000-28-INS - spec sheet
Manufacturer Resources
Product Specs
- Cut Style:
- Diagonal-Cutting
- Cutting Knives:
- Standard
- Depth:
- 8.2500 in
- Handle Color:
- Orange
- Handle Finish:
- 2-Layer Insulation
- Handle Length:
- 4.73" (12 cm)
- Height:
- 0.4380 in
- Insulated:
- Yes
- Jaw Length:
- 0.83" (2.1 cm)
- Jaw Thickness:
- 0.49" (1.2 cm)
- Jaw Width:
- 1.25" (3.2 cm)
- Joint Type:
- Hot-Riveted
- Material:
- Induction Hardened Steel
- Nose Type:
- Tapered
- Overall Length:
- 7.98" (20.3 cm)
- Standard:
- IEC 60900 and ASTM F1505
- Type:
- Diagonal Cutting Pliers
- Weight:
- 0.7000 lbs
- Width:
- 1.1880 in