Don-Jo 121 Cabinet Pull, 1-3/4...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3.26
$2.78
Don-Jo 121 Cabinet Pull, 1-3/4" Width, 3/4" Projection

Don-Jo 121 Cabinet Pull, 1-3/4" Width, 3/4" Projection

(No reviews yet) Write a Review

Model: 121-626
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3.26
$2.78
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 121 Cabinet Pull — 1-3/4" Width, 3/4" Projection

The Don-Jo 121 Cabinet Pull is a compact, residential-grade cabinet hardware solution designed to deliver reliable, everyday functionality with a clean, classic profile. Measuring 1-3/4" in width and offering a 3/4" projection, this pull provides a comfortable, ergonomic grip suited for cabinet doors and drawers throughout the home. Available in five finish options — 605, 613, 619, 620, and 626 — the Don-Jo 121 integrates seamlessly into a wide range of interior design styles, from traditional to contemporary.

Key Features

  • Compact Width: 1-3/4" width provides a proportional, unobtrusive profile ideal for standard residential cabinet applications.
  • Comfortable Projection: 3/4" projection offers a natural, easy-to-grip clearance between the pull and the cabinet surface for smooth, effortless operation.
  • Multiple Finish Options: Available in finishes 605, 613, 619, 620, and 626 to coordinate with existing cabinet hardware and interior décor.
  • Residential-Grade Quality: Engineered for residential use, delivering dependable performance in kitchens, bathrooms, laundry rooms, and other living spaces.
  • Cabinet Hardware Category: Classified under Cabinet Knobs and Pulls within the Pulls and Push Plates subcategory, ensuring straightforward product selection and replacement.
  • Convenient Shelf Pack: Sold individually (shelf pack of 1) for precise quantity purchasing without unnecessary surplus.

Technical Specifications

  • Product Group: Cabinet Hardware
  • Subcategory: Pulls and Push Plates
  • Product Subgroup: Cabinet Knobs and Pulls
  • Product Type: Cabinet Pulls
  • Commercial/Residential: Residential
  • Product Model: 121
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Residential Kitchen Cabinets and Drawers
  • Bathroom Vanity Cabinets
  • Laundry Room Storage Cabinetry
  • Home Office Furniture and Built-Ins
  • Bedroom Dresser and Wardrobe Hardware
  • Utility Room and Pantry Cabinets
  • Multi-Unit Residential Property Renovations

Why Don-Jo 121?

Don-Jo cabinet hardware is engineered to meet the practical demands of residential environments, combining straightforward installation with a refined finish selection that suits a variety of interior styles. The 121 Cabinet Pull's 1-3/4" width and 3/4" projection reflect a thoughtfully proportioned design that balances aesthetics with everyday usability. With five available finishes and a consistent build quality, the Don-Jo 121 is a dependable choice for homeowners and contractors seeking reliable cabinet hardware solutions.

Product Specs

Product Group:
Cabinet Hardware
Subcategory:
Pulls and Push Plates
Product Subgroup:
Cabinet Knobs and Pulls
Product Type:
Cabinet Pulls
Commercial/Residential:
Residential
Product Model:
121
Product Category:
Cabinet Hardware
Department:
Door Hardware

Don-Jo 121-626 – Frequently Asked Questions

1) Will the Don-Jo 121 cabinet pull fit my existing drilled holes, or do I have to redrill the doors?
The 121 is a 1-3/4 inch wide pull with a 3/4 inch projection. Cabinet pulls mount on center-to-center hole spacing, and the 121's overall width is what you have to work with here, so if you are swapping into holes drilled for a wider pull the new pull will not span them. On a fresh door or drawer front, or on a single-hole knob-style prep, that compact width keeps the footprint tight. Measure the spacing on your existing hardware before you pull it off the door.
2) Is the Don-Jo 121 pull rated for commercial cabinetry or is it a residential pull?
Residential. Don-Jo classifies the 121 as residential-grade, and the intended work is kitchen cabinets, vanities, laundry and pantry storage, built-ins and bedroom casework. For apartment turns and multi-family unit refreshes that is exactly the right grade. For a high-traffic commercial casework job, a nurse station, a school lab, a hotel back-of-house, look at a heavier pull instead, such as the Deltana SBP35 square bar pull in solid brass or the Omnia forged solid brass cabinet pulls.
3) I have a drawer front drilled for 3 inch center-to-center pulls. Will the Don-Jo 121 work?
No, not on 3 inch centers. The whole 121 pull is only 1-3/4 inches wide, so it cannot reach holes spaced 3 inches apart. For an existing 3 inch center prep, look at a pull actually built to that spacing, such as the Trimco 553 Series drawer pull at 3 inch ctc. Trimco's 562 Series covers 3-1/2 inch, 4 inch and 96mm centers if your holes measure out to one of those instead.
4) What is the closest equivalent to the Don-Jo 121 cabinet pull from another brand?
For a small utility pull in the same size class, the Orca Hardware CK-12001 T-Pull Bar is the nearest peer. The Don-Jo 121 measures 1-3/4 inches wide with a 3/4 inch projection and comes in 605 polished brass, 613 oil rubbed bronze, 619 satin nickel, 620 antique nickel and 626 satin chrome. The Orca CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel, so it is a quarter inch wider across the bar and is offered in the single satin nickel finish rather than a five-finish range. If the opening is already drilled for the Don-Jo 121 hole pattern, confirm the Orca bar's mounting centers before swapping.
5) What should I use instead of a Don-Jo 121 pull if the cabinet takes a knob rather than a pull?
A single-hole knob is the swap. The Orca Hardware CK-15030 from the Bachelor Collection is a round cabinet pull knob at 1-1/4 inch diameter, and the CK-16030 is the round ring version of the same collection at 1-1/4 inch diameter. For a squared profile, the Orca CK-17025 Blackcomb Collection square cabinet pull knob is 25mm diameter. All three are knobs and mount on a single fastener, where the Don-Jo 121 is a pull spanning 1-3/4 inches of width, so the door or drawer front will need to be re-drilled when moving between the two.
6) The Don-Jo 121 is too small for a wide drawer front. What is a longer pull that still reads as a plain bar?
Step up to a wider center-to-center bar pull. The Deltana SBP35 is a modern square bar pull at 3-1/2 inches in heavy-duty solid brass. The Trimco 553 Series drawer pull is 3 inch center to center, and the Trimco 562 Series is offered in 3-1/2 inch, 4 inch and 96mm center-to-center options if you need to match an existing bore spacing across a run of drawers. The Omnia 1968/102 modern cabinet pull is forged solid brass with 4 inch center-to-center spacing for the widest fronts. Each of these is a two-hole mount at a stated spacing, unlike the compact 1-3/4 inch width of the Don-Jo 121.
7) I need more hand clearance than the Don-Jo 121 gives. What pull has a deeper projection?
The Don-Jo 121 projects 3/4 inch off the cabinet face. If a gloved hand or a heavier drawer needs more room behind the grip, the Omnia 1970 modern cabinet pull is forged solid brass with a 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 are both forged solid brass with a 1-3/16 inch projection. That is roughly a half inch more standoff, which matters on cabinet doors that sit close to an adjacent wall or appliance since the deeper pull needs the swing clearance.
8) Is 3/4 inch of projection enough clearance to get my fingers behind a Don-Jo 121 pull?
Three quarters of an inch is the gap between the back of the 121 pull and the cabinet face. That's enough for a normal hand grip on a kitchen or vanity door and it keeps the pull close to the surface, which matters in a galley kitchen or a laundry closet where a deeper pull catches sleeves and hips. If you want something that stands further off the face, the Omnia 1970 carries a 1-1/4 inch projection and the Omnia 1969 and 1971 both run 1-3/16 inch.
9) What finishes does the Don-Jo 121 cabinet pull come in?
Five, and that is the complete list: 605 polished brass, 613 oil rubbed bronze, 619 satin nickel, 620 antique nickel, and 626 satin chrome. Those are standard BHMA finish numbers, so if the rest of the hardware in the unit is specified by number you can match the 121 to it directly rather than eyeballing a swatch. 619 and 626 are the two that read as brushed and bright silver respectively.
10) I need to standardize cabinet hardware across a whole apartment building. Can I order the Don-Jo 121 in bulk in one finish?
The 121 ships individually, one pull per pack, so you order the exact count the job needs rather than breaking cases and eating surplus. Finish is the only option to pick, and each of the five is its own orderable item, so a whole-building spec is a single finish times your door and drawer count. Doing a phased turn one unit at a time is straightforward for the same reason.
11) Can a Schaub Sabre edge pull replace a Don-Jo 121 cabinet pull?
No, they mount differently. The Schaub 10010, 10011 and 10012 Sabre pulls are edge pulls at 3 inch, 4 inch and 5 inch center to center respectively, designed to be worked from the edge of the door or drawer rather than the face. The Don-Jo 121 is a face-mounted cabinet pull with a 1-3/4 inch width and a 3/4 inch projection standing off the front. Swapping to an edge pull changes where the hardware sits and what the fabricator has to prep, so it is a design decision rather than a drop-in.
12) Will a Don-Jo 121 work on a refrigerator or other appliance door?
The Don-Jo 121 is a residential cabinet pull at 1-3/4 inches wide, sized for cabinet doors and drawer fronts rather than an appliance panel. For an appliance front, the Schaub 79-8 Steamworks is an 8 inch cabinet pull carried as an appliance pull, which gives the full-hand grip an appliance door normally needs. Use the 121 on the surrounding cabinetry and the longer appliance pull on the panel if you want the two to read as one hardware program.
13) How does the Don-Jo 121 compare to a forged solid brass cabinet pull for a high-traffic multi-family turn?
The Don-Jo 121 is a residential-grade pull, 1-3/4 inches wide with a 3/4 inch projection, in five finishes that let you standardize a whole building on one part number and one color. The Omnia 1969, 1970 and 1971 modern cabinet pulls are forged solid brass, and the Deltana SBP35 square bar pull is heavy-duty solid brass at 3-1/2 inches. The solid brass pulls are a heavier body and a larger grip; the 121 is the smaller, plainer profile that repeats cleanly across many identical units.
14) What is the difference between the Don-Jo 121 pull and a cabinet knob?
A knob is a single-screw round grip; the 121 is a pull, a graspable form standing 3/4 inch off the cabinet face across a 1-3/4 inch width. Wet hands come off a pull more reliably than a knob, which is why kitchens and vanities usually get pulls. If you want knobs on the upper doors and pulls below, the Orca Bachelor Collection round knobs run 1-1/4 inch diameter and the Blackcomb square knob is 25mm.
15) Which Don-Jo 121 finish should I pick to match oil rubbed bronze hardware already in the house?
Order the 613. That is Don-Jo's oil rubbed bronze on the 121 and it is the BHMA number your existing hardware is almost certainly specified under, so matching by number beats matching by eye. If the existing hardware is brushed silver you want 619 satin nickel, and if it is bright silver, 626 satin chrome. Note that oil rubbed bronze is a living finish across the trade and darkens unevenly with wear, so a new 613 pull next to a ten-year-old one will read slightly different at first.
16) What is a more decorative alternative to the plain Don-Jo 121 profile for a design-led kitchen?
The Don-Jo 121 is a compact plain-profile pull carried in five finishes from 605 polished brass through 626 satin chrome, which suits a straightforward turn or a rental fleet where everything matches. For a styled kitchen, the Emtek Schaub Collection offers several distinct looks: the Emtek Alexander cabinet pull, the Emtek Art Deco cabinet pull and the Emtek Bar cabinet pull, all catalogued with a cabinet knob/pull function, plus the Emtek 8405 Select cabinet pull in the Emtek SELECT series. Those are style families rather than a single size, so pick the member whose center spacing matches your existing bores.
How fast can I get the Don-Jo 121-626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 121-626 come with a warranty?
Absolutely. The Don-Jo 121-626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 121-626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 121-626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!