Don-Jo 43 Cast Door Arm Pull —...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$95.50
$83.48
Don-Jo 43 Cast Door Arm Pull — 5-1/2" CTC, 6-1/2" Overall, Satin Stainless Steel

Don-Jo 43 Cast Door Arm Pull — 5-1/2" CTC, 6-1/2" Overall, Satin Stainless Steel

(No reviews yet) Write a Review

Model: 43-630
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$95.50
$83.48
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 43 Cast Door Arm Pull — 5-1/2" CTC, 6-1/2" Overall, Satin Stainless Steel Finish

The Don-Jo 43 Cast Door Arm Pull is a commercial-grade surface-applied pull designed for demanding door hardware applications. Featuring a 5-1/2" center-to-center (CTC) spacing, 6-1/2" overall length, 1-3/4" projection, and 1-5/16" clearance, this arm pull delivers a secure and ergonomic grip for high-traffic entryways. Constructed with a cast build and finished in a durable 630 Satin Stainless Steel, it combines professional aesthetics with long-lasting performance. Thru-bolts are included for straightforward surface-applied installation.

Key Features

  • Precise Dimensions: 5-1/2" center-to-center (CTC) spacing and 6-1/2" overall length provide a comfortable, ergonomic grip suited for commercial door applications.
  • Projection & Clearance: 1-3/4" projection and 1-5/16" clearance ensure adequate hand room and a clean, professional profile on the door face.
  • Additional Specifications: 1-5/8" width, 4.25" projection (per product spec sheet), 4" overall, and 3-7/8" clearance dimensions also referenced in product specifications for complete fitment verification.
  • Cast Construction: Solid cast build delivers superior strength and durability for high-traffic commercial environments.
  • Satin Stainless Steel Finish (630): The 630 finish provides a refined, corrosion-resistant surface that complements a wide range of commercial door hardware and architectural styles.
  • Surface-Applied Installation: Designed for straightforward surface mounting with thru-bolts included, simplifying installation without the need for additional hardware.
  • Commercial-Grade Quality: Rated for commercial use across a broad range of institutional, retail, and office door applications.

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Subcategory: Pulls and Push Plates
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Door Pulls
  • Commercial/Residential: Commercial
  • Product Model: 43
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo 43?

Don-Jo 43 Cast Door Arm Pulls are engineered for professional-grade performance, combining solid cast construction with a corrosion-resistant 630 Satin Stainless Steel finish built to withstand the rigors of commercial use. The surface-applied design with included thru-bolts ensures a secure, reliable installation on a wide variety of door types. For facilities requiring dependable, aesthetically consistent door hardware, the Don-Jo 43 is a trusted choice among commercial door hardware professionals.

Product Specs

Product Group:
Door Trim and Accessories
Subcategory:
Pulls and Push Plates
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Door Pulls
Commercial/Residential:
Commercial
Product Model:
43
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo 43-630 – Frequently Asked Questions

1) What is the hole spacing on the Don-Jo 43 arm pull, and will it cover my existing pull holes?
The Don-Jo 43 is drilled 5-1/2 inches center to center, with a 6-1/2 inch overall length. If the door you're retrofitting is already bored on 5-1/2 inch centers, it drops straight onto the existing holes. Anything on a different spacing means new holes, and with only 1/2 inch of material beyond each mounting point there isn't room to hide an off-spacing bore.
2) How far does the Don-Jo 43 pull stand off the door, and is there enough hand room with gloves on?
Projection is 1-3/4 inches off the door face, with 1-5/16 inch clearance between the grip and the door. That 1-5/16 inch gap is the knuckle room you actually get, which is workable bare-handed but tight for a heavy work glove. If your crews are gloved, look at a pull with more clearance such as the Ives 8102HD, which carries 1-1/2 inch clearance.
3) Is the Don-Jo 43 long enough to use as a main entrance pull?
No, and that's the wrong application for it. At 6-1/2 inches overall it's a short arm pull sized for a one-hand grip, typical of restroom doors, storeroom doors, cabinet-style and secondary openings. For a glass or aluminum storefront entrance you want a long pull, such as the Deltana SSP1210 at 12 inches or the 24 inch Deltana SSPOBB24 back-to-back offset pulls.
4) I need a door pull with more hand clearance than the Don-Jo 43 for gloved or ADA use. What else should I look at?
The Don-Jo 43 gives 1-3/4 inch projection and 1-5/16 inch clearance, which is a tight, low-profile grip. Where more knuckle room is wanted, the Ives 8102HD heavy duty straight pull uses a 3/4 inch round bar with 1-1/2 inch clearance, and the Ives 8145EZHD is a 45 degree offset pull described as ADA compliant with heavy duty mounting hardware. The Ives 8169 is a C style offset solid pull in 1 inch diameter with heavy duty mounting if a deeper offset shape suits the door better.
5) I need pulls on both faces of the door. Does the Don-Jo 43 come as a back-to-back set?
The Don-Jo 43 is a surface-applied cast arm pull furnished with thru-bolts for single-side mounting. Where a matched grip is required on both faces, the Deltana OHP620 is an off-set handle pull supplied as a back-to-back set for 1-1/8 inch to 1-3/8 inch thick doors, the Deltana SSPOBB24 is a 24 inch back-to-back modern offset pair, and the Sure-Loc Knurled Long Door Pull is offered double-sided.
6) Does the Don-Jo 43 door pull come with mounting screws, or do I need to order fasteners separately?
Thru-bolts ship with the Don-Jo 43. It's a surface-applied pull, so the bolts pass through the door and land on the opposite face, and no separate fastener pack is required to install it.
7) Because the Don-Jo 43 thru-bolts, what has to go on the other side of the door?
Thru-bolting means the fasteners come out the back face, so the opposite side needs something to take them, either a matching pull or a push plate. A common pairing on a commercial swing door is a push plate on the push side, for example the Trimco 1001-1 heavy duty push plate at 3 by 12 inches. If you want pull on both faces, plan on a second 43.
8) Is the Don-Jo 43 pull made for commercial traffic or is it a residential-grade part?
It's a commercial part. The 43 is a cast pull in 630 satin stainless, flagged commercial rather than residential, and Don-Jo positions it for office buildings, schools, healthcare, retail, warehouses, multi-tenant residential, and municipal buildings. For a decorative residential entry you'd be better served by something like the Emtek Baden 8 inch door pull.
9) Will the 630 finish on the Don-Jo 43 match the rest of my stainless door hardware?
630 is satin stainless steel, the standard BHMA finish designation used across commercial levers, exit device trim, hinges and kick plates. If the other openings in the building are specified 630, the 43 will read the same. It's the only finish the 43 is built in, so there's no finish decision to make on the order.
10) Does the Don-Jo 43 pull have a handing, or will one part work on either door?
No handing. The 43 is a symmetrical arm pull on 5-1/2 inch centers, so the same part goes on a left or right hand door with no separate SKU to specify. That's different from a shaped decorative pull like the Emtek Art Nouveau 8 inch, where handing has to be selected at order.
11) What is the difference between the Don-Jo 43 and a straight bar pull like the ABH AB3300?
The Don-Jo 43 is a cast arm pull, a short one-piece grip with 5-1/2 inch CTC and a 1-3/4 inch projection off the door face. The ABH AB3300 is a straight flat end pull handle in 1 inch diameter, and the ABH AB7200 is a solid stainless steel flat end pull in 7/8 inch diameter with through-bolt mounting. Those are round-bar handles with the grip running parallel to the door; the 43's cast arm form gives a different hand position and a different hole pattern.
12) Can I use a push plate instead of the Don-Jo 43 on the push side of the door?
Yes, and that is the normal pairing. The Don-Jo 43 is a surface-applied pull with thru-bolts included for the pull side. On the push side, the Trimco 1001-1 heavy duty push plate measures 3 inches by 12 inches, the Trimco 1041 half-round push plate is 8 inches by 16 inches, and the Trimco 1070 series classic push/pull plates run 3-1/2 inches by 15 inches. A push plate has no grip and is not a substitute on a pull-side leaf.
13) Is the Cal-Royal PUL-175 an alternative to the Don-Jo 43?
They serve different purposes. The Don-Jo 43 is a plain cast arm pull in 630 satin stainless steel for general commercial openings. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inches high in stainless steel construction, which is cut to receive a rim cylinder so the door can be pulled and keyed at the same point. If there is no cylinder in the door at the pull location, the PUL-175 is not a drop-in for the 43.
14) I need a custom length pull rather than the fixed 6-1/2 inch Don-Jo 43. What is available?
The Don-Jo 43 is a fixed size at 5-1/2 inch center-to-center and 6-1/2 inch overall. Where the opening needs a length the 43 does not cover, the ABH AB3330 series is an offset round end pull offered with custom length options, and the ABH AB3310 is the offset flat end version for commercial surface mount. The Deltana SSP1210 is a fixed 12 inch contemporary pull for a single side if a longer set length works.
15) Will the Ives 8103HD mount in the same holes as the Don-Jo 43?
No. The Don-Jo 43 is a cast arm pull on 5-1/2 inch centers with thru-bolts supplied, while the Ives 8103HD is a heavy duty straight pull in 1 inch round stock with through bolt mounting on its own hole pattern. Both are through-bolted surface pulls, so the mounting method is the same, but the hole spacing differs and a swap means new bores unless the pattern is verified against the existing prep.
16) Will the Don-Jo 43 hold up in a healthcare or school restroom where it gets constant use?
It's built for that traffic: solid cast body, corrosion-resistant 630 satin stainless, and Don-Jo names healthcare institutions and educational facilities among the intended applications. Thru-bolting also matters in those buildings, since screws into the door face work loose under heavy cycling and bolts through the door do not.
17) For a restroom door, is the Don-Jo 43 the right pull or is there something purpose-built?
The Don-Jo 43 is a general commercial arm pull suited to office, retail, healthcare, educational, and government openings. For restrooms specifically, the Trimco 1035 Ultimate Restroom Pull is a heavy duty pull made for that application. Choose the 43 where a standard short cast arm pull is wanted and the 1035 where the restroom-specific form is called for.
18) What matches the Don-Jo 43 in satin stainless if I want a rounded offset shape on a wide door?
The Don-Jo 43 carries a 630 satin stainless steel finish on a cast arm body. For a rounded offset form on a wider leaf, the Deltana SSPORBB24 is a 24 inch back-to-back round offset door pull, and the Deltana SSPOBB24 is the modern offset version at the same 24 inch length. Both are long back-to-back pulls, so they change the look and the through-bolt layout compared with the compact 43.
How fast can I get the Don-Jo 43-630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 43-630 come with a warranty?
Absolutely. The Don-Jo 43-630 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 43-630?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 43-630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!