Don-Jo 7117 Pull Plate with Ro...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$61.22
$53.77
Don-Jo 7117 Pull Plate with Round Pull — 16" x 4" Commercial Door Trim

Don-Jo 7117 Pull Plate with Round Pull — 16" x 4" Commercial Door Trim

(No reviews yet) Write a Review

Model: 7117-628
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$61.22
$53.77
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 7117 Pull Plate with Round Pull — 16" x 4" Commercial Door Trim

The Don-Jo 7117 Pull Plate with Round Pull is a commercial-grade door trim accessory designed to provide a clean, professional appearance and reliable functionality on high-traffic doors. Measuring 16" in length and 4" in width, the 7117 features a 3/4" diameter round pull with a 2-1/4" projection, 10" center-to-center (CTC) spacing, and 1-1/2" clearance, making it well-suited for a wide range of commercial door applications. Available in six finishes — 605, 606, 613, 628, 629, and 630 — and compliant with ANSI J405, this pull plate delivers both aesthetic versatility and code-recognized performance.

Key Features

  • Plate Dimensions: 16" length x 4" width provides a substantial, professional-grade mounting surface suited for commercial door applications.
  • Round Pull Specifications: Features a 3/4" diameter round pull with a 2-1/4" projection and 1-1/2" clearance for comfortable, ergonomic gripping.
  • Center-to-Center Spacing: 10" CTC pull spacing accommodates standard commercial door preparations for straightforward installation.
  • Multiple Finish Options: Available in six finishes — 605, 606, 613, 628, 629, and 630 — to coordinate with a wide variety of door hardware and architectural styles.
  • ANSI J405 Compliance: Meets ANSI J405 standards, ensuring recognized performance and compatibility with commercial building requirements.
  • Commercial-Grade Construction: Engineered for demanding commercial environments where durability and consistent performance are essential.
  • Broad Model Family: Part of the Don-Jo 70xx/71xx pull plate series, offering a range of plate sizes, pull diameters (5/8", 3/4", 1"), projections (2", 2-1/4", 3"), and CTC options (5-1/2", 6", 8", 10") to suit varied door configurations.

Certifications & Compliance

  • ANSI J405 Compliant
  • Commercial Application Rated

Technical Specifications

  • Subcategory: Pulls and Push Plates
  • Product Group: Door Trim and Accessories
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Push and Pull Plates
  • Commercial/Residential: Commercial
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities and Schools
  • Healthcare Institutions and Medical Offices
  • Retail Establishments and Storefronts
  • Government and Municipal Buildings
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential and Hospitality Properties

Why Don-Jo 7117?

Don-Jo pull plate products are engineered to meet the rigorous demands of commercial door hardware applications, with the 7117 offering ANSI J405-compliant performance in a versatile 16" x 4" format. With six available finishes and a precisely dimensioned 3/4" round pull at 10" CTC, the 7117 delivers consistent, professional-grade functionality for installers and building owners who require reliable, code-recognized door trim solutions.

Product Specs

Subcategory:
Pulls and Push Plates
Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Push and Pull Plates
Commercial/Residential:
Commercial
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo 7117-628 – Frequently Asked Questions

1) Will the Don-Jo 7117 pull plate cover the holes from the pull I'm taking off?
The 7117 plate measures 16 x 4 inches, so it covers a fair amount of existing prep, but the pull itself mounts on 10 inch centers. If the old pull was drilled on 8 inch or 6 inch centers, the new bolt holes land in different spots and the plate has to hide the old ones. Measure the existing hole spacing center to center first. Don-Jo's 70xx/71xx plate family runs 5-1/2, 6, 8 and 10 inch CTC, so if yours is not 10 inch there is a sibling model that matches the prep you already have.
2) Is the Don-Jo 7117 a pull plate or a push plate? I need both sides of the door.
The 7117 is the pull side only, a 16 x 4 inch plate with a 3/4 inch round pull attached. A push/pull set needs a flat push plate for the opposite face ordered separately. Delaney makes a matching-size pair if you want both faces the same footprint, a 4 inch x 16 inch pull plate and a 4 inch x 16 inch push plate.
3) Is a 16 inch pull plate too big for a narrow stile aluminum door?
Probably, yes. The 7117 plate is 4 inches wide, and a typical narrow stile aluminum entrance has a stile around 2 to 3-1/2 inches, so the plate would overhang onto the glass stop. For that opening you want a narrower plate. The Delaney 3-1/2 x 15 inch pull plate is the smaller footprint option, and for aluminum storefront doors fitted with a Detex Value Series exit device the Detex P/PN Series pull plate is made for that pairing. The 7117 belongs on wood, hollow metal, or wide stile doors where 4 inches of face is available.
4) Is the Don-Jo 7117 heavy duty enough for a school or hospital entrance?
The 7117 is built for commercial use and carries the ANSI J405 designation, and Don-Jo lists it for schools, healthcare, government and industrial openings. On a genuinely abusive door, a pull that gets yanked hundreds of times a day or takes cart traffic, look at a heavy duty cast plate instead: the Ives 8302 with through bolt mounting, or the Trimco 1013 cast round pull plate. Through bolting is what keeps a pull on the door long term, since screws into a hollow metal face eventually work loose.
5) I need a pull plate with 10 inch centers. What are my options besides Don-Jo?
The 7117 is the Don-Jo answer at 10 inch CTC on a 16 x 4 inch plate. The Ives 8303 heavy duty pull plate is offered in 8 inch or 10 inch center-to-center, so it is the direct alternative if you want a heavy duty cast plate on the same spacing. Trimco's plates run shorter centers, 5 inch on the 1010, 5-1/2 inch on the 1012 and 1013, and 6 inch on the 1014, so those are not drop-ins for a 10 inch prep.
6) What is the closest equivalent to the Don-Jo 7117 pull plate from another manufacturer in the same 4 by 16 inch plate size?
The Don-Jo 7117 is a 16 inch by 4 inch pull plate with a 3/4 inch diameter round pull at 10 inch center-to-center. Delaney offers a pull plate in the same 4 inch by 16 inch plate footprint, so the plate covers the same area of door face and the same amount of existing paint or wear. Confirm the pull spacing on the Delaney before ordering it against an opening already drilled for 10 inch CTC, since matching plate size does not by itself guarantee matching hole centers.
7) I need a 10 inch center-to-center pull on a heavy traffic door - what else besides the Don-Jo 7117 has that spacing?
The Don-Jo 7117 carries a 3/4 inch round pull at 10 inch center-to-center on a 16 by 4 inch plate. The Ives 8303 is a heavy duty pull plate offered with 8 inch or 10 inch center-to-center mounting, so it can be set to the same 10 inch hole centers. If the existing door is already prepped at 10 inch CTC, either one lands on the same holes; the Ives adds a heavy duty rating and a second CTC choice if some openings in the building are drilled at 8 inch.
8) Which pull plate has a shorter pull grip than the Don-Jo 7117 for a narrow stile door?
The 7117 pull spans 10 inch center-to-center, which needs a plate 16 inches long to carry it. Where the door stile or the glass cutout will not take that, Trimco offers tighter spacings: the 1010 Series cast pull plate at 5 inch CTC, and the 1012 cast tapered and 1013 round pull plates at 5.5 inch CTC. The Trimco 1014 Series uses a half-round pull at 6 inch CTC. All four put the grip in a much shorter run than the 7117.
9) Is a push plate the same thing as the Don-Jo 7117?
No. The 7117 is a pull plate - it carries a 3/4 inch diameter round pull standing 2-1/4 inch off the plate with 1-1/2 inch clearance behind it, so a hand can wrap the bar and pull. A push plate is a flat plate with no pull on it, mounted on the push side to take handprints. Delaney sells them as separate items in matching sizes: a 4 inch by 16 inch push plate and a 4 inch by 16 inch pull plate. On a swing door you normally order one of each, not two of the same.
10) How far does the Don-Jo 7117 pull stick out from the door?
Projection is 2-1/4 inches, with 1-1/2 inches of clearance behind the 3/4 inch diameter round grip. That clearance is what your hand goes into, and it is also what decides whether the pull clears anything mounted nearby. On a door in a tight corridor or next to a jamb-mounted device, the 2-1/4 inch projection is the number to check against your swing path. The wider family offers 2 inch and 3 inch projections if 2-1/4 is not what you need.
11) Does the Don-Jo 7117 pull plate meet the ANSI standard for commercial door trim?
ANSI J405 compliant. That is the designation a spec writer or institutional buyer will want on the submittal for pull plates, and it is what makes the 7117 usable where the drawing calls out an ANSI trim number rather than a brand.
12) Does the Don-Jo 7117 pull plate have a handing, or does it work on either door?
No handing. The 7117 is a symmetrical 16 x 4 inch plate with the round pull centered on 10 inch spacing, so the same part goes on a left hand or right hand door, and on either leaf of a pair. Orientation on the door is your call, though it is normally mounted vertically with the pull centered at grip height.
13) Can I use the Don-Jo 7117 on the pull side of a door with an exit device?
Where the pull has to work with a specific exit device, use the trim the device manufacturer builds for it. Detex makes the P/PN Series pull plate specifically for its Value Series exit devices, so the plate is prepped to the device's mounting pattern. The Don-Jo 7117 is general commercial door trim with a fixed 10 inch center-to-center pull, so on an exit device opening the hole pattern has to be verified against the device before it is specified.
14) What pull plate should I specify if I want a narrower plate than the Don-Jo 7117 on a 4 inch face?
The 7117 plate is 4 inches wide by 16 inches long. Delaney offers a 3-1/2 inch by 15 inch pull plate, with a matching 3-1/2 inch by 15 inch push plate for the opposite face. That half inch of width and inch of length matters when the plate has to sit inside a narrow stile or clear a vision lite frame or an existing lock rose.
15) What is a more decorative alternative to the Don-Jo 7117 for a hospitality or storefront entrance?
The 7117 is a plain commercial plate with a round bar pull, sized 16 by 4 inches and made in six finishes including 605 polished brass, 628 satin aluminum and 630 satin stainless. For lobbies and boutique entries where the trim is part of the design, Emtek makes push and pull plate sets in three styles: Knoxville, Modern, and the lost wax cast bronze Petal. Those are sold as coordinated push and pull sets, where the 7117 is ordered as the pull plate alone.
16) Which pull plates are rated heavy duty if the Don-Jo 7117 is going on an abusive opening?
For openings taking abuse, the heavy duty pull plates in the same class are the Ives 8302, the Ives 8303, and Trimco's cast 1010, 1012 and 1013 Series. The Don-Jo 7117 is built as commercial door trim and is ANSI J405 compliant, with a 3/4 inch round pull at 10 inch CTC. If the specification on the drawing calls out heavy duty explicitly, the Ives and Trimco models above carry that designation.
17) What finishes does the Don-Jo 7117 pull plate come in?
Six: 605 polished brass, 606 satin brass, 613 oil rubbed bronze, 628 satin aluminum, 629 bright stainless, and 630 satin stainless steel. For a building being standardized, 630 satin stainless is the usual commercial default and 628 satin aluminum matches aluminum storefront framing. If you are matching existing levers or closers, order by the BHMA number rather than the color name, since brass finishes vary between makers.
18) Will a Don-Jo 7117 pull plate look right next to the Emtek pulls on my other doors?
Not really. The 7117 is plain commercial trim, a flat rectangular plate with a round tube pull, finished in standard BHMA numbers. Emtek's push and pull plate lines are decorative: the Knoxville and Modern series, and the Petal series in lost wax cast bronze. If the building's look is residential or boutique hospitality, go Emtek. If the goal is durable, code-recognized trim that matches the rest of the commercial hardware, the 7117 is the right family.
How fast can I get the Don-Jo 7117-628 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 7117-628 come with a warranty?
Absolutely. The Don-Jo 7117-628 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 7117-628?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 7117-628 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!