Don-Jo BD1837 Barn Door Half R...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$123.49
Don-Jo BD1837 Barn Door Half Round Pull, 4" Length, 5" x 1.245" Hole

Don-Jo BD1837 Barn Door Half Round Pull, 4" Length, 5" x 1.245" Hole

(No reviews yet) Write a Review

Model: BD1837-630
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$123.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo BD1837 Barn Door Half Round Pull, 4" Length, 5" x 1.245" Hole

The Don-Jo BD1837 is a Barn Door Half Round Pull designed for residential sliding barn door applications, offering a clean, half-round profile with a 4" length and a 10" center-to-center (CTC) spacing. The pull features a 2" projection, a 0.45" width, and a 1.55" clearance, with a 5" x 1.245" hole cutout to accommodate smooth, comfortable operation. Available in finishes 613, 622, and 630, the BD1837 delivers a refined aesthetic suited to modern and traditional barn door installations alike.

Key Features

  • Half Round Pull Profile: Distinctive half-round design provides a comfortable grip and a stylish appearance for barn door applications.
  • 4" Pull Length: Compact 4" length suits a wide range of residential barn door sizes and configurations.
  • 10" Center-to-Center (CTC) Spacing: 10" CTC measurement ensures precise, symmetrical mounting on barn door panels.
  • 2" Projection & 1.55" Clearance: Provides adequate hand clearance and comfortable grip depth for smooth door operation.
  • 5" x 1.245" Hole Cutout: Pre-specified hole dimensions simplify door preparation and ensure a clean, professional installation.
  • 0.45" Width: Slim profile integrates seamlessly with barn door hardware for a cohesive look.
  • Multiple Finish Options: Available in finishes 613, 622, and 630 to coordinate with a variety of door hardware and interior design styles.
  • Residential Application: Engineered specifically for residential sliding and barn door hardware installations.

Technical Specifications

  • Subcategory: Pulls and Push Plates
  • Product Group: Sliding Door and Barn Door Hardware
  • Product Subgroup: Barn Door Hardware
  • Product Type: Barn Door Pulls
  • Commercial/Residential: Residential
  • Product Category: Sliding Door and Barn Door Hardware
  • Department: Door Hardware

Typical Applications

  • Residential Barn Door Installations
  • Interior Sliding Door Systems
  • Bedroom and Closet Barn Doors
  • Home Office Sliding Partitions
  • Laundry Room and Utility Room Barn Doors
  • Open-Concept Living Space Dividers
  • Renovation and Remodeling Projects

Why Don-Jo BD1837?

Don-Jo Barn Door Pull products are crafted to deliver reliable, consistent performance in residential door hardware applications. The BD1837 Half Round Pull combines precise dimensional specifications — including a 4" length, 10" CTC, and 5" x 1.245" hole — with a choice of three finishes, making it a versatile and dependable solution for any barn door project. Engineered for straightforward installation and lasting everyday use.

Product Specs

Subcategory:
Pulls and Push Plates
Product Group:
Sliding Door and Barn Door Hardware
Product Subgroup:
Barn Door Hardware
Product Type:
Barn Door Pulls
Commercial/Residential:
Residential
Product Model:
BD1837
Product Category:
Sliding Door and Barn Door Hardware
Department:
Door Hardware

Don-Jo BD1837-630 – Frequently Asked Questions

1) What hole cutout do I need to prep in my barn door for the Don-Jo BD1837 pull?
The BD1837 half round pull calls for a 5 inch by 1.245 inch hole cutout in the door face, with mounting holes spaced 10 inches center to center. Cut the opening and lay out the CTC before hanging the panel, since routing a slot on a door already on the track is awkward work. The pull itself is 4 inches in length.
2) How much hand clearance does the Don-Jo BD1837 barn door pull give you?
Projection is 2 inches off the door face with 1.55 inches of clearance behind the grip, so there is room to get fingers around it while sliding. Width is 0.45 inches. That 2 inch projection is the number to watch if the door slides past a casing, a wall return, or a second panel in a bypass setup, because the pull sticks out that far the whole way along the run.
3) Is the Don-Jo BD1837 pull rated for commercial traffic or is it a residential part?
Don-Jo lists the BD1837 as a residential product, built for interior sliding and barn door installations: bedroom and closet doors, laundry and utility rooms, home office partitions, and open-plan dividers. For a high-cycle commercial opening in an office or a healthcare corridor, a residential barn door pull is the wrong specification and a commercial-rated door pull is the part to look at instead.
4) Can I use the BD1837 barn door pull as the only hardware on the door, or do I need something on the back side too?
The BD1837 is a pull, not a latch and not a track kit. It gives you a grip to slide the panel and nothing else, so the rolling hardware, track, floor guide, and any privacy latch are separate items. On a barn door you normally want a pull on each face unless the door is against a wall on one side, in which case a flush pull on the back face is the common approach so the panel can sit tight to the wall.
5) Will the BD1837 half round pull work on a bypass or pocket door?
Not on a pocket door. With a 2 inch projection the pull cannot enter the wall pocket, so a pocket opening needs a flush or recessed pull instead. Bypass doors are a maybe: the two panels run on offset tracks, and the BD1837 only works on the panel that passes on the outside, and only if the 2 inch projection clears the trim and the other panel. On a single surface-mounted barn door sliding across the face of the wall, projection is not an issue.
6) What finishes does the Don-Jo BD1837 barn door pull come in?
Three: 622 matte black, 630 satin stainless steel, and DU duronodic brown coated. Matte black is the usual match for black barn door track kits, 630 satin stainless reads closest to brushed nickel and satin chrome trim on adjacent doors, and duronodic is a dark bronze tone for bronze or oil-rubbed hardware schemes. Pick by what is already on the track and the adjacent passage sets, not by the door slab color.
7) What do I have to specify when ordering the Don-Jo BD1837 barn door pull?
Just the finish. The BD1837 comes in one size and one configuration, so there is no handing, no door thickness option, and no length choice to make. The only decision on the order form is 622 matte black, 630 satin stainless steel, or DU duronodic brown coated.
8) I have several barn doors in the same house. Will the BD1837 pull look consistent across all of them?
It will, and that is the reason to standardize on one model. The BD1837 is a single 4 inch half round pull with fixed geometry, 10 inch CTC and a 5 inch by 1.245 inch cutout, so every door gets the same prep and the same look. Order all of them in one finish code (622, 630, or DU) at the same time so the plating batch matches across the doors.
9) Is a 4 inch half round pull big enough to slide a heavy barn door?
The 4 inch length of the BD1837 gives roughly a full hand's grip, and the 1.55 inch clearance behind it means you can hook your fingers rather than pinch it. For a heavy solid-core or glass panel that a user pulls hard on, a longer bar-style or ladder pull spreads the load across two hands and is easier to start moving. The half round shape suits a normal hollow-core or light solid interior barn door.
How fast can I get the Don-Jo BD1837-630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo BD1837-630 come with a warranty?
Absolutely. The Don-Jo BD1837-630 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo BD1837-630?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo BD1837-630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!