DORMA ED900PR Grade 1 Low Ener...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$19,813.00
$15,130.25
Dormakaba DORMA ED900, Push Side Top Jab Mount, Low Energy Swing Door Operator, Single Door Application DOR-ED900-Arm

DORMA ED900PR Grade 1 Low Energy Surface Mounted Electromechanical Door Operator Pair with Full width 3-Piece Double Door Cover

(No reviews yet) Write a Review

Model: ED900PR J8 FWPR3 600
$19,813.00
$15,130.25
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$19,813.00
$15,130.25
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

OVERVIEW

Low Energy Operator

Employing an innovative electromechanical drive and a state-of-the-art microprocessor motion control system, the ED900 is DORMA's most advanced low-energy swing door power operator. The operator is exceptionally quiet, safe, and easy to use

Low energy operator ANSI/BHMA Grade 1 certified.

  • Innovative technology
  • Advanced power assist
  • Fully ADA compliant
  • Small footprint
  • Advanced features

FEATURES

Advanced power assist

When operated manually, the ED900 demands little physical effort. Advanced power assist through the entire opening cycle makes even the heaviest-rated door feel light.

Fully ADA compliant

The operator is especially helpful for children, the elderly, persons with disabilities, or those carrying objects or pushing carts. This fully ADA-compliant device opens doors at precisely controlled speeds and forces, assuring safety for all users.

Advanced features

The ED900 also includes a blow-open feature for smoke ventilation (per NFPA code 92B), permanent hold-open, and an onboard power supply delivering 1.5 amps @ 24-volt DC, which eliminates the need for a secondary power supply. It includes twelve programmable options to accommodate even the most challenging door installations.

Small footprint

In addition, the ED900 low energy operator boasts the smallest footprint in the industry, up to 65 percent smaller than some other manufacturers' operators. 

TECHNICAL DETAILS 

  • Onboard power supply for access control devices:1.5A @ 24 VDC
  • Maximum door size: 48" (1219 mm) wide
  • Maximum door weight: 220 lb (100 kg)
  • Operator weight: 26.58 lb (12 kg)
  • Operating temperatures:
    5° F to 122° F (−15° C to 50° C)
  • Standard operator dimensions:
    27" W × 2-3/4" H × 5-1/8" D(685 mm × 70 mm × 130 mm)
  • Maximum opening angle:
    Powered—110°
    Manual—180°
  • Non-handed
  • On-board cycle counter
  • 27" cover standard
  • One unit for push/pull track and top jamb applications
  • Axle extensions: 0, 5/16"(9 mm), 3/4" (20 mm), 1-3/16"(30 mm), and 2-3/8"(60 mm) — standard.

DOWNLOADS & RESOURCES

Dorma ED900 Swing Door Operators Brochure

Dorma ED900 Antimicrobial Finish for Healthier Door Hardware

Dorma ED900 Antimicrobial Protected Door Hardware Brochure

Dorma ED900 Touchless Access Solutions

Manufacturer Resources

Product Specs

Product Group:
Door Controls
Series:
ED900 Series
Product Subgroup:
Power Operators
Product Type:
Low Energy Operators
Subcategory:
Power Operators - Electromechanical
Door Weight:
220
Commercial/Residential:
Commercial
Power:
6.6 A
Electronic:
Yes
Product Model:
ED900PR
Product Voltage:
120V
Product Size:
48"
Delay Function:
Yes
Door Opening Size:
180 Degrees
Hold Open Feature:
Yes
Product Category:
Door Controls
Department:
Door Hardware

Dormakaba ED900PR J8 FWPR3 600 – Frequently Asked Questions

1) What does the PR in ED900PR mean, and what do I get for a pair of doors?
PR is the pair configuration: two ED900 operators dressed with a full width three piece double door cover (FW3) so the header reads as one continuous run across both leaves instead of two separate 27 inch covers with a gap between them. Each leaf still gets its own operator, and each operator can be specified with its own mount and arm.
2) Which arm do I order for a top jamb push side install with a deep reveal?
Three mount and arm options are offered. J8 is push side top jamb for a 0 to 8 inch reveal, J12 is push side top jamb for an 8 to 12 inch deep reveal, and T is pull side track mount for a 0 to 1 inch reveal. Measure the reveal from the face of the door to the stop before you pick. One ED900 unit covers push, pull track and top jamb applications, so the arm is what changes, not the operator body.
3) Does the ED900 need a separate power supply for my card reader and electric strike?
Not for most access control loads. The operator has an onboard power supply delivering 1.5 amps at 24 VDC for access control devices, which removes the secondary power supply from the job. Incoming power is 120V. If your combined strike, reader and sensor draw exceeds 1.5 A at 24 VDC, add a supply.
4) Is the DORMA ED900 ADA compliant and what grade is it?
The ED900 is ANSI/BHMA Grade 1 certified as a low energy operator and is fully ADA compliant, opening at controlled speeds and forces. It also carries a blow-open feature for smoke ventilation per NFPA code 92B, which matters on stair and atrium openings.
5) What is a comparable low energy swing door operator to the DORMA ED900PR if I need an electromechanical unit from another manufacturer?
The ED900PR is an electromechanical low energy operator rated ANSI/BHMA Grade 1, handling doors up to 220 lb and 48 inches wide. The closest electromechanical alternatives are the LCN 9131 Benchmark, a low-energy electromechanical operator with pull side mounting and ADA compliance, and the LCN 9142 Benchmark, the push side mount version of the same family. Both are electromechanical rather than hydraulic, so the drive type matches the ED900. Note that LCN splits pull side and push side into separate model numbers, while the ED900 is a single non-handed unit configured with a J8 or J12 top jamb push side arm or a T pull side track arm.
6) I need an operator for a door heavier than 220 lb - what should I use instead of the ED900PR?
The ED900 is rated to a maximum door weight of 220 lb and a maximum door width of 48 inches, so a heavier or wider leaf is outside its range. For those openings, look at the heavy duty Norton Rixson operators: the 5700 Series electrohydraulic power operator complete kit, the 6000 Series low energy electrohydraulic operator with slide track arm and pull side mounting, or the 5200 Series low energy power operator. All three are catalogued as heavy duty and are electrohydraulic rather than electromechanical drives.
7) Do I have to specify handing for the ED900?
No. The ED900 is non-handed, so the same operator works left or right hand. What you do have to get right is the mount and arm for the reveal, and the finish.
8) How far will the ED900 swing the door open under power?
Powered opening goes to 110 degrees; pushed by hand the door will travel to 180 degrees. So if your opening needs more than 110 degrees of automatic travel, plan around it. Permanent hold open is available, and the operator has a delay (hold) function on the open cycle.
9) Is the ED900 usable on an unheated vestibule or a door that sees outdoor temperatures?
Operating range is 5 F to 122 F (-15 C to 50 C). That covers most vestibules, unconditioned lobbies and covered entries. Sustained temperatures below 5 F are outside the stated range.
10) Do I need to add a conduit box when ordering the ED900?
It is an option, not standard. The electrical option axis is either CB, which is the conduit box only, or None. Add CB where the electrician needs a junction point at the header for the 120V feed; skip it if power is being landed another way.
11) Does the ED900 come with the axle extension I need for my header condition?
Axle extensions are standard with the operator in 0, 5/16 inch (9 mm), 3/4 inch (20 mm), 1-3/16 inch (30 mm) and 2-3/8 inch (60 mm) lengths, so the arm can be shimmed out to clear varying header setbacks without a special order.
12) My door is heavier than 220 lb or the opening is a high traffic full automatic entrance. What should I use instead of the ED900?
The ED900 tops out at 220 lb and is a low energy operator, meaning slow controlled opening for assisted use rather than a full power automatic entrance. For a heavier duty electrohydraulic approach, the Norton Rixson 5700 Series complete kit and the 5200 Series are both listed heavy duty. Low energy operators generally are not the right answer for continuous high volume automatic traffic.
13) Can staff still pull the door open by hand if the operator loses power?
Yes, and it stays easy to use. The ED900 provides power assist through the entire opening cycle so even a heavy rated leaf feels light when pushed manually, and manual travel goes to 180 degrees. There is also an onboard cycle counter for maintenance tracking.
14) Is there a smaller or simpler alternative to the ED900PR for a single interior door?
The ED900PR is configured as a pair operator with a full width 3-piece double door cover, which is more hardware than a single leaf needs. For a single door, the LCN 6440 COMPACT automatic operator module runs on 24VDC with touchless access and is rated for 185 lb doors, and the LCN 6440XP COMPACT offers the same 24VDC low-energy operation and 185 lb door capacity. The Cal-Royal 8600 Series low energy automatic swing door operator with obstacle detection and the SDC AUTOP Series microprocessor-controlled low energy operator are also single-leaf options. Confirm the leaf weight is within 185 lb before specifying either COMPACT module.
15) Which operator has wireless or RF actuation built into the package if the ED900PR does not?
The ED900 provides an onboard power supply delivering 1.5 amps at 24 volts DC for access control devices, so actuators are wired back to the operator. If you want RF and network actuation supplied as part of the operator package, the Norton Rixson 4500 Series low energy door operator comes with an RF square switch and a WiFi interface. The Norton Rixson 5700 Series kit ships as a complete kit with touch-free switches, and the LCN 6440 COMPACT module includes touchless access.
16) Does the Norton Rixson 6000 Series work as a direct swap for the ED900 on a pull side track application?
They fill the same role but are not identical hardware. The ED900 offers a T pull side track mount arm for 0 to 1 inch reveal, and the Norton Rixson 6000 Series is a low energy operator with a slide track arm and pull side mounting, so the mounting concept lines up. The difference is the drive: the ED900 uses an electromechanical drive with microprocessor motion control, while the 6000 Series is electrohydraulic and catalogued as heavy duty. Header length, arm geometry, and wiring differ between brands, so a swap means new prep rather than reusing the existing header cut.
17) What finishes does the ED900 come in, and can I get it painted to match the storefront?
Seven finishes: 600 primed for painting, 689 aluminum, 690 dark bronze, 691 light bronze, 693 black, 695 dark bronze and 696 satin brass. Order 600 when the header has to be field painted to a custom storefront color.
18) For a building standard where I need matching finishes across several entrances, how does the ED900PR compare on finish choice?
The ED900PR is offered in 600 primed for painting, 689 aluminum, 690 dark bronze, 691 light bronze, 693 black, 695 dark bronze, and 696 satin brass, so it can be matched to most existing storefront and frame colors, including a primed option you paint to a custom color. Among the alternatives, the Cal-Royal 8600 Series, SDC AUTOP Series, and LCN 9131 and 9142 Benchmark operators cover the same low energy swing door application if you are standardizing on a different brand across the facility.
How fast can I get the Dormakaba ED900PR J8 FWPR3 600 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Dormakaba ED900PR J8 FWPR3 600 come with a warranty?
Absolutely. The Dormakaba ED900PR J8 FWPR3 600 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Dormakaba ED900PR J8 FWPR3 600?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Dormakaba ED900PR J8 FWPR3 600 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Videos

!