DynaLock 6700 Series Pushplates, Single Gang, 1-60 Sec. PTD, SPDT Form “Z”

PTD stands for push-to-delay: pressing the plate transfers the contacts and holds that state for a timed interval you set anywhere from 1 to 60 seconds, then it returns on its own. That is what you want on a maglock or electric strike egress button, since the door has to stay released long enough for a person to get through without anyone holding the button. The switch is a single-pole double-throw Form Z, so you have both a normally open and a normally closed set of transfer contacts off one plate, letting you release the lock and simultaneously signal an alarm shunt or door contact input.

Not the 6700. The single gang 6700 is a gang box plate. Within the same 6700 and 6800 pushplate family, DynaLock builds narrow recessed models specifically for aluminum store front frames, which need only minimal cut-out and preparation. If you are working a glass front, order the narrow recessed version instead. For a narrow stile alternative from another brand, ZenSupply also carries the Trine 342 narrow style electric door switch.

The DynaLock 6700 is engraved PUSH TO EXIT for egress control rather than barrier-free actuation. For a handicap-marked actuator, the RCI 950 series round push plate carries the handicap symbol and is a momentary switch in satin stainless steel.

The DynaLock 6700 single gang pushplate is the 1-60 second pneumatic time delay version with an SPDT Form Z contact. If the job only calls for a simple momentary release without a delay, the Securitron PB3 series push button or the ACSI 1320-1-MOM-ER momentary pushbutton switch, which is marked Emergency Release, cover that without timing.

Satin Aluminum US28 is the standard finish. Beyond that you can order the 6700 in Bright Brass US3, Satin Brass US4, Light Bronze US10, Dark Bronze US10B, Medium Bronze US13, Black Satin US19, and Bright Chrome US26, eight finishes in total. For a property manager matching existing trim across a building, US28 is the usual pairing with aluminum storefront and US10B with dark anodized entrances.

It is built for it. The 6700 is a commercial, heavy duty egress control, and the plate is machined from solid aluminum rather than formed sheet or plastic, which is why it holds up at school, hospital, and multi-family exit doors where a stamped button face gets destroyed.

Standard 6700 plates carry engraved "PUSH TO EXIT" text. Special engraving is available by consulting the factory, so if your facility needs "PUSH TO OPEN", a room number, or bilingual text, that is a factory order rather than a stock configuration. If you need an off-the-shelf plate with different marking, ZenSupply carries the ACSI 1320-1-MOM-ER pushbutton marked "Emergency Release" and the RCI 908 series exit button with red EXIT text.

The DynaLock 6700 is an engraved aluminum plate with no lamp. For a lit device, ZenSupply carries the Securitron PB4L with an illuminated halo and stainless button, the Securitron PB5 medium round illuminated push button, and the Securitron EEB emergency exit push button with interchangeable LED lenses. If the application needs a latching rather than timed release, the RCI 919 rotary release button with maintained operation and satin aluminum finish is another route, and the ACSI 1310-1 mortise keyswitch covers key-controlled release.

The DynaLock 6700 is a timed release, holding the circuit for a set 1 to 60 second interval before it drops. For a switch that stays in the actuated state until it is reset, the RCI 908 series electronic exit button with red EXIT text uses maintained operation, and the RCI 919 series rotary release button is also maintained, in satin aluminum.

No. The DynaLock 6700 is a push-to-exit plate anyone on the secure side can press, with all-active momentary style operation across the series. The ACSI 1310-1 is a mortise keyswitch from the 1300 series, meaning it requires a key to actuate, so it controls authorized entry or override rather than free egress.

No need to switch brands. The DynaLock 6700 pushplate is offered in Light Bronze US10, Dark Bronze US10B and Medium Bronze US13, along with Black Satin US19, Bright Chrome US26, Satin Aluminum US28, Bright Brass US3 and Satin Brass US4. By comparison the RCI 950 handicap push plate is satin stainless steel and the RCI 919 rotary release is satin aluminum.

Just a switch. The 6700 is an electronic pushplate switch used to release a lock on the egress side, with no credential reading, no keypad, and no logic beyond its own 1-60 second timer. It has to be wired to whatever holds the door, a maglock, electric strike, or access panel input. Entry-side authorization needs a separate reader or keyswitch.

The DynaLock 6700 is a single gang engraved pushplate with a PTD contact rating of 10 A at 125VAC. The RCI 909F-MO is a flush mount momentary rocker switch rated 250VAC 10A in a beige finish, so it is a rocker actuator rather than a labeled push-to-exit plate and carries no egress engraving.