You may also like
DynaLock 6700 Series Pushplates
Model 6750 Recessed Single Gang, 1-60 Sec. PTD, SPDT Form “Z”
6700 & 6800 Series Pushplates are heavy duty egress controls machined
from solid aluminum with engraved “PUSH TO EXIT” signage. Multiple
switching configurations and finishes are available. Narrow recessed models
are specifically designed for installation in aluminum store front frames,
requiring minimal cut-out/preparation. All momentary models feature “all
active” operation. Consult factory for special engraving.
Standard finish - Satin Aluminum US28
PTD Contact Rating: 10 A @ 125VAC
All Others: 6 A @ 125VAC
Manufacturer Resources
Product Specs
- Subcategory:
- Push Buttons
- Series:
- 6700
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Sensors, Switches, Relays and Timers
- Product Type:
- Switches / Push Buttons
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Duty Level:
- Heavy Duty
- Product Model:
- 6750
- Product Finish:
- Satin Aluminum (US28)
- Product Category:
- Electronic Access Controls
- Department:
- Door Hardware
DynaLock 6750 US26 – Frequently Asked Questions
1) What does the 1-60 second PTD on the DynaLock 6750 pushplate actually do?
PTD is a built-in push-to-delay timer, adjustable from 1 to 60 seconds. Press the plate and the switch transfers for whatever interval you set, then returns on its own, so a mag lock or electric strike stays released long enough for someone to get through the opening without anyone holding the button. That is the difference between the 6750 and the momentary models in the 6700 family, which are active only while pressed.
2) Will a DynaLock 6750 recessed pushplate fit an aluminum storefront frame?
Yes. The narrow recessed 6700 models are built specifically for aluminum store front frames and need only minimal cut-out and preparation. The 6750 is a recessed single gang plate, so it drops into a single gang opening rather than needing a wide mullion face.
3) Which push button should I specify if the release has to stay latched until someone resets it, rather than time out like the DynaLock 6750?
The 6750 releases on a 1 to 60 second pneumatic time delay and then restores. For a switch that holds its state until deliberately changed, look at maintained-operation devices: the RCI 908 series electronic exit button with red EXIT text in maintained operation, or the RCI 919 series rotary release button with maintained operation in a satin aluminum finish, which matches the 6750's standard satin aluminum US28.
4) I need a push to exit button for an aluminum storefront but do not need a time delay - what should I use instead of the DynaLock 6750?
The 6750 is specifically the timed version, with a 1 to 60 second pneumatic time delay and SPDT Form Z switching. For a straight momentary release, the Securitron PB3 series push button or the RCI 950 series round push plate with a momentary switch in satin stainless steel cover that role, as does the ACSI 1320-1-MOM-ER pushbutton switch marked Emergency Release. All of DynaLock's momentary models in the 6700 and 6800 pushplate line feature all active operation.
5) What is SPDT Form Z switching and why would I need it on an exit button?
Form Z is a single pole double throw contact set with one common, one normally closed and one normally open leg, so a single press both breaks the lock power circuit and makes a second circuit. Typical use is dropping a mag lock while simultaneously signaling the access control panel or shunting an alarm contact. If you only need to break power, a simpler momentary 6700 configuration covers it.
6) What finishes does the DynaLock 6750 come in, and which is standard?
Satin Aluminum US28 is the standard finish. Eight are offered in total: Bright Brass US3, Satin Brass US4, Light Bronze US10, Dark Bronze US10B, Medium Bronze US13, Black Satin US19, Bright Chrome US26 and Satin Aluminum US28. US28 and US19 are the usual matches for clear and dark anodized storefront; the bronzes suit dark bronze anodized frames.
7) Is the 6750 pushplate suitable for a high-traffic commercial entrance?
It is a commercial, heavy duty egress control machined from solid aluminum, not a stamped or plastic-bodied button, so it holds up on doors that get pressed hundreds of times a day. The face carries engraved PUSH TO EXIT signage rather than a printed label, which will not wear off.
8) I need a round or surface-mount exit button instead of a recessed gang plate. What else is there?
The 6750 is recessed single gang, so it needs a cut-out. If you are mounting on a wall or a mullion face without machining, look at the Securitron PB3 Series push button or the RCI 950 Series round push plate, which carries a handicap symbol in satin stainless. For narrow storefront applications the Trine 342 narrow style electric door switch is another route.
9) Is the DynaLock 6750 an emergency exit button, or do I need something like the Securitron EEB?
The 6750 is an egress control pushplate engraved PUSH TO EXIT, heavy duty and machined from solid aluminum, with a 1 to 60 second time delay on an SPDT Form Z contact. Devices sold specifically as emergency release hardware include the Securitron EEB emergency exit push button with interchangeable LED lenses and the ACSI 1320-1-MOM-ER pushbutton switch marked Emergency Release. If your drawing calls for emergency release signage or a lens indicator, those are the closer fit; the 6750 covers normal timed egress at the door.
10) I want the release button to be visible at night - does the DynaLock 6750 illuminate, or is there a lighted alternative?
The 6750 is an engraved solid aluminum pushplate; its visual identity comes from the engraved PUSH TO EXIT text and the finish, offered in eight options including satin aluminum US28, bright chrome US26, black satin US19, bright brass US3 and satin brass US4. For an illuminated device, the Securitron PB4L series pairs an illuminated halo with a stainless push button, the Securitron PB5 is a medium round illuminated push button, and the Securitron EEB uses interchangeable LED lenses.
11) Can a mortise keyswitch replace the DynaLock 6750 on a storefront door?
They do different jobs. The 6750 is a push to exit pushplate that anyone can operate, recessed single gang and designed for aluminum store front frames with minimal cut-out, with a 1 to 60 second time delay. The ACSI 1310-1 is a mortise keyswitch, which restricts operation to a key holder. Use the keyswitch for authorized-only release and the 6750 where free egress is required.
12) What is a comparable switch to the DynaLock 6750 if I need a flush mount device with a 10 A rating?
The 6750's pneumatic time delay contact is rated 10 A at 125VAC, with all other switching configurations in the 6700 and 6800 pushplate line rated 6 A at 125VAC. A comparable flush device is the RCI 909 series flush mount momentary rocker switch, rated 250VAC 10A, in a beige finish. The difference is the operator and look: the 6750 is an engraved push to exit plate available in eight architectural finishes, while the 909F-MO is a rocker.
13) Can I get custom text instead of PUSH TO EXIT on a DynaLock 6700 plate?
Special engraving is available, but it is a factory order rather than a stock configuration. The standard 6750 ships engraved PUSH TO EXIT.
14) Can I standardize exit buttons across a building if some openings are storefront and some are drywall?
The 6700 and 6800 pushplates share the same engraved solid aluminum look and the same finish range, so you can keep a consistent appearance across an entire facility while using the narrow recessed versions like the 6750 in aluminum storefront frames and other configurations elsewhere. Specify one finish, Satin Aluminum US28 being the standard, and carry it through.
How fast can I get the DynaLock 6750 US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DynaLock 6750 US26 come with a warranty?
Absolutely. The DynaLock 6750 US26 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DynaLock 6750 US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the DynaLock 6750 US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.