You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- Accuracy:
- Within 0.002
- Connection:
- Screw Terminals
- Contact Configuration:
- 2NO-2NC
- Contact Rating:
- 10A at 240Vac, 1A at 250Vdc
- Enclosure Material:
- Die Cast Zinc
- Environmental Rating:
- NEMA 1, 3, 3S, 4, 4X, 6, 6P, 13, IP67
- Maximum Ac Current:
- 10A
- Maximum Dc Current:
- 1A
- Operating Temperature:
- 14° to 250°F (-10° to 121°C)
- Department:
- Electrical
- Product Length:
- 1.54 IN
- Switch Classification:
- Adj. Top Pushbutton
- Product Height:
- 5.18 IN
- Product Weight:
- 1.1063 LB
- Product Width:
- 1.78 IN
B-LINE E50BLT2 – Frequently Asked Questions
1) Can the B-Line E50BLT2 limit switch be used in a washdown or wet area?
Yes. The E50BLT2 carries NEMA 1, 3, 3S, 4, 4X, 6, 6P, 13 and IP67 environmental ratings, so it handles washdown, dust, and temporary submersion. The 4X rating covers corrosive environments, and the body is die cast zinc.
2) Will the E50BLT2 switch a 240V motor starter coil and a 24V DC PLC input?
Both are within range. Contacts are rated 10A at 240Vac and 1A at 250Vdc, so a 240V coil is fine at or under 10 amps, and low-current DC logic inputs are well inside the 1A DC limit. Wiring lands on screw terminals.
3) How many circuits can I run off one E50BLT2 limit switch?
Four. The contact block is 2NO-2NC, giving two normally open and two normally closed circuits from a single actuation, so you can stop a motor and signal a controller off the same switch.
4) What kind of actuator does the E50BLT2 have, and what motion does it suit?
It is an adjustable top pushbutton head, so it is meant for a cam, dog, or moving carriage that strikes straight down onto the plunger. Repeat accuracy is within 0.002, which is why it gets used for position stops rather than rotary lever travel. If your target sweeps past from the side, a roller lever head is the better choice.
5) Is the E50BLT2 rated for a cold outdoor site or a hot process area?
Operating range is 14 to 250 degrees F (-10 to 121 C). That covers most bakery, dryer, and hot process work, but it stops at 14 F, so unheated outdoor installs in hard winter climates fall outside the rating.
6) What does plug-in mean on the E50BLT2, and why would I spec it over a fixed-body switch?
The E50 plug-in design separates the switch body from the wired receptacle base, so on a failure you swap the body without pulling conductors off the screw terminals. For maintenance crews standardizing across a plant, that keeps downtime to minutes and lets one base accept a replacement head.
7) What is the exact part number to order this B-Line heavy duty limit switch?
Order B-Line E50BLT2. That is the manufacturer part number for the E50 series heavy duty plug-in switch with the adjustable top pushbutton head and 2NO-2NC contacts.
How fast can I get the B-LINE E50BLT2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE E50BLT2 come with a warranty?
Absolutely. The B-LINE E50BLT2 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE E50BLT2?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE E50BLT2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.