Eaton 4227-BOX Arrow Hart Stra...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$9.42
Eaton 4227-BOX Arrow Hart Straight Blade Connector, 15A 250V, Yellow

Eaton 4227-BOX Arrow Hart Straight Blade Connector, 15A 250V, Yellow

(No reviews yet) Write a Review

Model: 4227-BOX

In Stock (leaves warehouse same day if ordered before 3pm ET)

$9.42
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Eaton 4227-BOX Arrow Hart Straight Blade Connector, 15A 250V, Yellow

The Eaton 4227-BOX Arrow Hart straight blade connector is a commercial-grade, two-pole, three-wire grounding device built for #18-12 AWG conductors. Rated 15A at 250V and configured as a 6-15R, this connector terminates cord sets on commercial equipment where a durable, code-compliant plug-in connection is required. The thermoplastic housing and brass contacts are paired with a yellow thermoplastic body for high visibility on the job site, and the back-wire screw terminals speed installation while maintaining a secure, low-resistance connection.

Key Features

  • Wire Range: Accepts #18-12 AWG conductors for flexible cord and cable applications.
  • Amperage/Voltage Rating: Rated 15A at 250V for commercial-duty electrical connections.
  • Configuration: 6-15R, two-pole, three-wire grounding connector for reliable, polarized connections.
  • Termination: Back-wire screw terminals allow fast, secure conductor termination.
  • Contact Material: Brass contacts provide durable, low-resistance electrical conductivity.
  • Housing Construction: Thermoplastic body and housing resist impact and wear in commercial environments.
  • Finish/Color: Yellow thermoplastic housing for easy identification on cords and equipment.

Technical Specifications

  • Product Type: Straight Blade Connector
  • Configuration: 6-15R, Two-Pole, Three-Wire, Grounding
  • Wire Range: #18-12 AWG
  • Amperage Rating: 15A
  • Voltage Rating: 250V
  • Termination: Back Wire, Screw
  • Material: Brass Contacts, Thermoplastic Housing
  • Color: Yellow
  • Grade: Commercial

Typical Applications

  • Commercial Equipment Cord Sets
  • Portable Tool and Appliance Connections
  • Extension Cord Repair and Assembly
  • Replacement of Worn or Damaged Connectors
  • General Commercial Electrical Maintenance

Why Eaton?

Eaton's Arrow Hart line delivers commercial-grade wiring devices built with brass contacts and durable thermoplastic construction for dependable performance under repeated use. The 4227-BOX connector's back-wire screw terminals and 6-15R grounding configuration make it a practical choice for electricians who need a rugged, code-compliant connection for #18-12 AWG cord applications rated 15A at 250V.

Manufacturer Resources

Product Specs

list_batch:
EAT-20260924
Product Type:
Straight Blade Connector
Voltage Rating:
250V
Amperage Rating:
15A
Configuration:
6-15R Two-Pole Three-Wire Grounding
Connection Type:
Back Wire Screw
Grade:
Commercial
Department:
Electrical
Product Subgroup:
Plugs & Connectors
Product Material:
Thermoplastic
Product Color:
Yellow
Product Group:
Wiring Devices
Product Height:
1.5 in
Product Length:
2.6 in
Product Width:
1.5 in
Number Of Poles:
Two-pole

Eaton 4227-BOX – Frequently Asked Questions

1) What plug does the Eaton 4227-BOX connector mate with?
The 4227-BOX is a 6-15R connector body, so it accepts a NEMA 6-15P plug: two flat blades plus a ground pin, two-pole three-wire grounding at 15A 250V. It will not take a 5-15P 125V plug, and it will not accept a 6-20P plug with the T-shaped neutral blade.
2) What wire size can I land in this Eaton Arrow Hart 15A 250V connector?
Terminals accept #18 through #12 AWG conductors, which covers 16/3 and 14/3 SJ or SJO cord as well as 12 AWG for a full-rated 15A run. Termination is back wire with screws, so strip, insert, and tighten, no crimp or ferrule needed.
3) Can I use the 4227-BOX for a 240V single-phase piece of equipment?
Yes. At 250V with a two-pole three-wire grounding 6-15R pattern, it is wired hot, hot, ground for a 240V single-phase load drawing up to 15A. There is no neutral conductor in this configuration, so equipment needing 120/240V with a neutral requires a different device.
4) Is this a cord-end connector or a wall receptacle?
It is a straight blade connector body, meaning it goes on the end of a flexible cord to receive a plug. It is not a wall-mounted receptacle and has no yoke or strap for a device box. Use it for cord sets, extension cord assembly, or replacing a damaged female end.
5) Is the Eaton 4227-BOX commercial grade or residential grade?
Commercial grade, with brass contacts and a thermoplastic housing. That is the tier to standardize on for shop tools, maintenance carts, and equipment cords that get plugged and unplugged daily. For heavier abuse or wet-location drops you would step up to an industrial-grade device instead.
6) Why is this Eaton connector yellow, and does the color mean anything electrically?
The yellow thermoplastic body is for visibility on cords and equipment, not a code-mandated voltage marking. Crews often use it to flag a 250V cord end so nobody tries to plug it into 120V gear. The electrical identity comes from the 6-15R blade pattern, not the color.
7) What is the exact part number to order this Eaton Arrow Hart 6-15R connector?
Eaton Arrow Hart part number 4227-BOX. One model covers the whole offering, so there is no finish or amperage choice to specify: it ships as the yellow 15A 250V 6-15R connector body.
How fast can I get the Eaton 4227-BOX delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton 4227-BOX come with a warranty?
Absolutely. The Eaton 4227-BOX is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton 4227-BOX?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Eaton 4227-BOX from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!