You may also like
Eaton B-Line series 4Dimension strut channel nuts
Manufacturer Resources
Product Specs
- Application:
- Used in dove-tail sides & open sides
- Bolt Thread Rod Size:
- 5/16"-18
- Certifications:
- Not Applicable
- Load Rating Pull Out Strength :
- 883 lbs open-489 lbs dove-tail
- Load Rating Slip Strength :
- 767 lbs open-300 lbs dove-tail
- Product Category:
- Dove-tail slide-in nut
- Product Height:
- .299 IN
- Product Length Depth:
- 1.908 IN
- Product Weight:
- .07 LB
- Product Width:
- 1.053 IN
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Dove-tail combo nut washer
- Product Finish:
- Electro-plated
- Product Details:
- Dove-tail combo nut washer
- Product Material:
- Steel
B-LINE 4DSN223ZN – Frequently Asked Questions
1) What bolt size does the B-Line 4DSN223ZN strut nut take?
The 4DSN223ZN channel nut is tapped 5/16"-18. Your threaded rod, hex head cap screw, or hanger bolt has to be 5/16"-18 to thread into it, so if the rest of your run is 3/8"-16 you need a different nut.
2) Will this nut work in dove-tail strut channel as well as standard open-side channel?
Both. The Eaton B-Line 4Dimension 4DSN223ZN is a slide-in nut made for dove-tail sides and open sides of the channel, which is why it is sold as a combo nut washer rather than a spring nut for one profile only. Load capacity differs by which side you use it in.
3) Do I need a separate washer with the B-Line 4DSN223ZN?
No. It is a combo nut washer, so the washer face is part of the nut. One piece goes in the channel and you run the bolt into it.
4) Is the 4DSN223ZN suitable for outdoor or wet locations?
It is steel with an electro-plated finish, which is a zinc-type coating for dry indoor service. For exterior, damp, or corrosive environments, specify a hot-dip galvanized or stainless channel nut instead.
5) Is there a spring on this channel nut?
No spring. The 4DSN223ZN is a slide-in style nut, so it stays where you set it by friction and bolt tension rather than being held up by a spring. On overhead work that means holding it in place until the bolt takes up.
6) What are the dimensions and weight of the 4DSN223ZN strut nut?
It measures 1.908 in length/depth, 1.053 in width, and .299 in height, and weighs .07 lb each. The .299 in height matters most: it is what lets the nut slide inside the channel before you turn it into position.
7) What part number do I order for this Eaton B-Line 4Dimension channel nut?
Order by manufacturer part number 4DSN223ZN, Eaton B-Line series 4Dimension. That single MPN covers the 5/16"-18 electro-plated steel dove-tail combo nut washer.
How fast can I get the B-LINE 4DSN223ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4DSN223ZN come with a warranty?
Absolutely. The B-LINE 4DSN223ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4DSN223ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4DSN223ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.