You may also like
Eaton B-Line series 4Dimension strut channel nuts
Manufacturer Resources
Product Specs
- Application:
- Used in dove-tail sides & open sides
- Bolt Thread Rod Size:
- 3/8”-16
- Certifications:
- Not Applicable
- Load Rating Pull Out Strength :
- 883 lbs open-446 lbs dove-tail
- Load Rating Slip Strength :
- 1067 lbs open-300 lbs dove-tail
- Product Category:
- Dove-tail slide-in nut
- Product Height:
- .299 IN
- Product Length Depth:
- 1.908 IN
- Product Weight:
- .068 LB
- Product Width:
- 1.053 IN
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Dove-tail combo nut washer
- Product Finish:
- Electro-plated
- Product Details:
- Dove-tail combo nut washer
- Product Material:
- Steel
B-LINE 4DSN228ZN – Frequently Asked Questions
1) What bolt size does the B-Line 4DSN228ZN strut nut take?
The 4DSN228ZN takes 3/8-16 threaded rod or bolts. That is the only thread on this nut, so if your hangers run 1/2-13 or 1/4-20 you need a different size nut in the 4Dimension line.
2) Will this B-Line nut work in both dove-tail and standard open-slot strut channel?
Yes, the 4DSN228ZN is built for both. Eaton lists it for use in dove-tail sides and open sides of 4Dimension channel, which is why it is called a dove-tail combo nut washer. Load capacity differs between the two: in open channel it holds more than it does in the dove-tail groove.
3) Do I need a separate washer with the B-Line 4DSN228ZN strut nut?
No. It is a combo nut washer, so the washer face is integral to the nut. You supply the 3/8-16 bolt or rod only.
4) Is this strut nut suitable for outdoor or damp locations?
The 4DSN228ZN is steel with an electro-plated zinc finish. That is a standard indoor and protected-location finish. For sustained wet, coastal, or corrosive exposure, specify a hot-dip galvanized or stainless channel nut instead.
5) Is the 4DSN228ZN a spring nut or a slide-in nut?
It is a slide-in dove-tail nut, not a spring-loaded channel nut. You feed it in from the end of the strut or into the dove-tail groove and position it, rather than dropping it through the open face and letting a spring hold it. If you are retrofitting mid-run on a channel that is already loaded up, a spring nut is the easier part to work with.
6) What are the dimensions of the 4DSN228ZN channel nut?
It measures 1.908 x 1.053 x .299 inches and weighs .068 lb each. The .299 inch profile is what lets it slide into the channel groove rather than needing to be dropped in through an open face.
How fast can I get the B-LINE 4DSN228ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4DSN228ZN come with a warranty?
Absolutely. The B-LINE 4DSN228ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4DSN228ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4DSN228ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.