You may also like
Eaton B-Line series 4Dimension strut channel nuts
Manufacturer Resources
Product Specs
- Bolt Thread Rod Size:
- 3/8”-16
- Certifications:
- Not Applicable
- Load Rating Pull Out Strength:
- 883 lbs open-446 lbs dove-tail
- Load Rating Slip Strength:
- 1067 lbs open-300 lbs dove-tail
- Product Category:
- Dove-tail slide-in nut
- Product Height:
- .299 IN
- Product Length Depth:
- 1.908 IN
- Product Weight:
- .068 LB
- Product Width:
- 1.053 IN
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Dove-tail combo nut washer
- Product Finish:
- Stainless steel type 316
- Product Details:
- Dove-tail combo nut washer
- Product Material:
- Steel
- Product Length:
- 1.908 in
- Application:
- Used in dove-tail sides & open sides
B-LINE 4DSN228SS6 – Frequently Asked Questions
1) What thread size bolt does the B-Line 4DSN228SS6 channel nut take?
The 4DSN228SS6 is tapped 3/8"-16. Order your threaded rod, hanger rod or hex bolts in 3/8"-16 to match; a 1/2"-13 rod will not thread into it.
2) Will this B-Line nut work in dove-tail strut channel as well as standard open-side channel?
Yes, the 4DSN228SS6 is made for both. It is a dove-tail slide-in combo nut washer intended for dove-tail sides and open sides of the Eaton B-Line 4Dimension channel, so one part covers both faces of the strut.
3) Is this strut nut suitable for outdoor or corrosive environments?
It is type 316 stainless steel, which is the grade specified for coastal, wash-down, chemical and wastewater work where plain electro-galvanized hardware rusts out. Pair it with 316 stainless channel and 316 rod so you are not creating a dissimilar-metal joint.
4) Do I need a separate washer with this B-Line channel nut?
No separate washer is needed. The 4DSN228SS6 is a combo nut washer, so the bearing surface is built into the part. You supply the 3/8"-16 bolt or rod and the fitting being attached.
5) Is there a spring on this strut nut to hold it in place while I install it?
This is a slide-in style nut, not a spring nut. It slides along the channel and is held by the dove-tail or channel lips once the bolt is tightened, so on overhead work you hold it in position by hand rather than relying on a spring to park it.
6) What are the dimensions and weight of the 4DSN228SS6 strut nut?
It measures 1.908 x 1.053 x .299 inches and weighs .068 lb each. The long dimension is what lets the nut turn and seat across the channel lips, so check that your channel opening accepts a nut of that length before you buy a box.
How fast can I get the B-LINE 4DSN228SS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4DSN228SS6 come with a warranty?
Absolutely. The B-LINE 4DSN228SS6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4DSN228SS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4DSN228SS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.