You may also like
Eaton B-Line series 4Dimension strut channel nuts
Manufacturer Resources
Product Specs
- Application:
- Used in openside only
- Bolt Thread Rod Size:
- 3/8"16
- Certifications:
- Not Applicable
- Load Rating Pull Out Strength:
- 908 lbs
- Load Rating Slip Strength:
- 800 lbs
- Product Category:
- Dove-tail slide-in nut
- Product Height:
- .35 IN
- Product Length Depth:
- 1.992 IN
- Product Weight:
- .077 LB
- Product Width:
- .75 IN
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Dove-tail combo nut washer
- Product Finish:
- Electro-plated
- Product Details:
- Dove-tail combo nut washer
- Product Material:
- Steel
- Product Length:
- 1.992 in
B-LINE 4DWN228ZN – Frequently Asked Questions
1) What thread size does the B-Line 4DWN228ZN strut nut take?
The 4DWN228ZN takes 3/8-16 threaded rod or bolts. If your hanger rod is 1/2-13 or your bolts are 1/4-20, this is the wrong nut for the run.
2) Can I use this dove-tail nut in closed or back-to-back strut channel?
No. The 4DWN228ZN is specified for openside use only. It is a dove-tail slide-in nut, so it feeds into the open slot of the channel rather than being spun in through a closed profile. For closed or welded back-to-back strut, you need a different channel nut style.
3) Do I need a separate washer with the B-Line 4DWN228ZN?
No separate washer is needed. It is a combo nut washer, so the bearing surface is built into the nut itself. One piece, one part number to stock.
4) Is the 4DWN228ZN suitable for outdoor or damp locations?
It is electro-plated steel, which is a light zinc-type finish meant for dry indoor service. For exterior, wash-down, or corrosive areas, specify a hot-dip galvanized or stainless channel nut instead.
5) How does a dove-tail slide-in nut install compared with a spring nut?
A dove-tail nut like the 4DWN228ZN slides into the open side of the channel and wedges against the lips as the bolt is tightened, so there is no spring to compress and no tool needed to set it. A spring nut has to be pushed in and turned a quarter-turn, but it stays put on its own in overhead work. The dove-tail is faster on horizontal runs where you can feed it from the end or drop it in and position it.
How fast can I get the B-LINE 4DWN228ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4DWN228ZN come with a warranty?
Absolutely. The B-LINE 4DWN228ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4DWN228ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4DWN228ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.