You may also like
Eaton B-Line series 4Dimension strut channel nuts
Manufacturer Resources
Product Specs
- Application:
- Used in openside only
- Bolt Thread Rod Size:
- 5/16"-18
- Certifications:
- Not Applicable
- Load Rating Pull Out Strength:
- 750 lbs
- Load Rating Slip Strength:
- 450 lbs
- Product Category:
- Dove-tail slide-in nut
- Product Height:
- .35 IN
- Product Length Depth:
- 1.992 IN
- Product Weight:
- .079 LB
- Product Width:
- .75 IN
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Dove-tail combo nut washer
- Product Finish:
- Stainless steel type 316
- Product Details:
- Dove-tail combo nut washer
- Product Material:
- Steel
B-LINE 4DWN223SS6 – Frequently Asked Questions
1) What bolt size does the B-Line 4DWN223SS6 strut nut take?
The 4DWN223SS6 is tapped 5/16"-18. Your threaded rod, hex bolt, or hanger hardware has to match that thread; it will not accept 3/8"-16 or 1/2"-13 hardware.
2) Is the 4DWN223SS6 strut nut suitable for outdoor or corrosive environments?
It is Type 316 stainless steel, the grade specified for coastal, wash-down, water treatment, and chemical exposure where standard zinc-plated or 304 hardware corrodes. That makes it a fit for rooftop runs, parking structures, and food or pharma facilities.
3) Can I use this B-Line dove-tail nut in closed or back-to-back strut channel?
No. The 4DWN223SS6 is specified for openside use only. It is a dove-tail slide-in nut, so it enters through the open lip of the channel. For closed or back-to-back sections you need a different fitting style.
4) Do I need a separate washer with the 4DWN223SS6 strut nut?
No separate washer is required. It is a combo nut washer, meaning the washer face is part of the nut body, so it is one piece to handle on the ladder instead of two. That also cuts the loose-parts count on a large trapeze install.
5) Is the 4DWN223SS6 spring-loaded like a standard strut nut?
It is not a spring nut. The 4DWN223SS6 is a dove-tail slide-in design from the Eaton B-Line 4Dimension line, so it drops through the channel opening and seats on the lips rather than being compressed past them with a spring and plate. Fewer parts to lose, but it is not interchangeable with a spring-nut assembly in a closed channel.
6) Is the body of this strut nut stainless or plated steel?
The material is steel with a Type 316 stainless specification, so it is not a plated carbon nut that will bleed rust at cut edges. If your job spec calls out all-316 hardware, order matching 316 rod and bolts too, mixing carbon fasteners into a stainless assembly reintroduces the corrosion problem you paid to avoid.
How fast can I get the B-LINE 4DWN223SS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4DWN223SS6 come with a warranty?
Absolutely. The B-LINE 4DWN223SS6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4DWN223SS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4DWN223SS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.